Berkel 823E User manual

Model 800E Series
Manual Gravity Feed Slicers
823E 9” Knife
825E 10” Knife
827E 12” Knife
Item #
Standard Features
1-speed, 1/4 HP, 1/3 HP (827E), totaly enclosed and
permanently lubricated knife motor
Furnishedin115/60/1,2.5/3.1 ampACETLlisted
Finish is stainless steel and sanitary, anodized
aluminum; unit disassembles quickly without
tools for easy cleaning
45 Product table on 827E model
823E is a nominal 9” (220 mm) diameter;
825E is a nominal 10” (250 mm) diameter;
827E is a nominal 12” (300 mm) diameter;
hollow ground, hardened and polished forged
chromium-plated carbon steel knife
823E carriage handles food up to 7-1/8”
(181 mm) wide, by 6” (152 mm) high or 6”
(152 mm) diameter
825E carriage handles food up to 7-1/2”(191
mm) wide, by 6” (152 mm) high or 7”(178 mm)
diameter
827E carriage handles food up to 8-3/4”
(222 mm) wide, by 7-1/4”(184 mm) high or 7”
(178 mm) diameter
Precise slice adjustment to a thickness of
9/16” (14 mm)
Built-in, top-mounted, two stone knife sharpener
with dual-action system
Permanent, tapered knife ring guard covers non-
slicing portion of knife even when the sharpener
and center plate are removed; ring guard design
provides more room behind the knife for easy
cleaning
Positive, moisture protected, on/off rocker switch
(823E, 825E); rotary switch (827E); and power
indicator light
Attached 6-foot, flexible, 3-wire cord and plug for
grounded receptacle
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX [phone] • www.berkel.com
Form #SPC01-0607R
Safety and Convenience Features
Berkel Models 823E, 825E and 827E manual
gravity feed slicers feature Berkel’s hollow ground,
chromium-plated carbon steel knife and built-in,
dual-action sharpener with convenient handle
located on the sharpener cover. The permanent,
tapered guard covers the non-slicing portion of the
knife even when the sharpener and center plate
are removed. The ring guard is designed to provide
added room behind the knife for easy cleaning.
The compact, space-saving design is ideal for limited
kitchen counter space. Units are easy to clean and
disassemble quickly without tools.
Approved By:
Date
Model 825E
Manual Gravity Feed Slicer Model 800E Series

.A.S.UniohtiLynapmoClekreB2002©0607R-10CPS#mroF
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX [phone] • www.berkel.com
Model 800E Series
Manual Gravity Feed Slicers
Specifications
Motor: 1-speed, 1/4 HP(823E & 825E), 1/3 HP (827E),
totaly enclosed, permanently lubricated ball bearings,
thermally protected.
Electrical:Furnishedin115/60/1,2.5/3.1 amp,AC,
ETL listed.
Finish/construction: All food contact areas are
stainless steel or anodized aluminum including
the pusher, gauge plate, product table, center plate,
slice deflector, ring guard and one-piece base. Slicer
disassembles quickly without tools for easy cleaning.
Knife: 823E is a nominal 9” (220 mm) diameter;
825E is a nominal 10” (250 mm) diameter; 827E
is a nominal 12” (300 mm) diameter; hollow ground,
hardened and polished forged chromium-plated
carbon steel.
Cutting Capacity: 823E carriage handles food
up to 7-1/8” (181 mm) wide by 6” (152 mm) high
or 6” (152 mm) diameter.
825E carriage handles food up to 7-1/2” (191 mm)
wide by 6” (152 mm) high or 7” (178 mm) diameter.
827E carriage handles food up to 8-3/4” (222 mm)
wide by 7-1/4” (184 mm) high or 7” (178 mm) diameter.
Slice Thickness: Precision system provides infinite slice
adjustment and consistent cuts of hard or soft foods
from tissue thin to 9/16” (14 mm).
Full Gravity Feed: Full 45 angle feed on the 827E
requires less mechanical pressure. Equipped with
anodized aluminum pusher to hold product and
minimize waste.
Knife Sharpener: Built-in, top-mounted, two stone
dual-action system for a lasting, razor-sharp edge. Unit
is removable and submersible for easy cleaning.
Knife Ring Guard: Permanent, tapered guard covers non-
slicing portion of knife edge even when the sharpener and
center plate are removed. The ring guard is designed to
provide added room behind the knife for easy cleaning.
On/Off Switch: Highly reliable, moisture resistant, on/off
rocker switch (823E, 825E), rotary switch (827E); and
power indicator light.
Cord and Plug: Attached 6-foot, flexible, 3-wire cord and
plug for grounded receptacle.
Warranty: All parts, service and travel coverage for one
year, excluding wear items.
As we continually strive to improve our products, specifications
are necessarily subject to change without notice.
snoisnemiDtcudorPefinKecilSgnittuC.oNledoM
CthgieHBhtpeDAhtdiWretemaiDssenkcihTyticapaC
823E 7-1/8” (181 mm) wide to 9/16” 9” 15-1/4” 18-3/4” 14-1/2”
6” (152 mm) high (14 mm) (220mm) (387 mm) (476 mm) (368 mm)
6” (152 mm) diameter
825E 7-1/2” (191 mm) wide to 9/16” 10” 17-1/2” 21-1/8” 15”
6” (152 mm) high (14 mm) (250mm) (446 mm) (537 mm) (381 mm)
7” (178 mm) diameter
827E 8-3/4” (222 mm) wide to 9/16” 12” 17-1/4” 22” 16”
7-1/4” (184 mm) high (14 mm) (300mm) (438 mm) (559 mm) (406 mm)
7” (178 mm) diameter
snoisnemiDxoBthgieWlacirtcelErotoM
Net Ship Width Depth Height
823E 1-speed 115/60/1 29 lbs. 36 lbs. 22-1/2” 17-3/4” 16-1/2”
)mm914()mm154()mm275()gk61().gk31(PH4/1
825E 1-speed 115/60/1 33 lbs. 40 lbs. 24-3/4” 19-3/4” 17-1/2”
)mm544()mm205()mm926()gk81().gk51(PH4/1
827E 1-speed 115/60/1 41 lbs. 49 lbs. 24-3/4” 19-3/4” 17-1/2”
)mm544()mm205()mm926()gk22().gk91(PH3/1
B
A
C
Manual Gravity Feed Slicer Model 800E Series