Berkel 839A User manual

Model 839A
Automatic Gravity Feed Slicer
Standard Features
➤Separate 1-speed, 1/2 HP, totally enclosed
andpermanently lubricated motors for the knife
and carriage
➤Furnished in 115/60/1, 5.8 amp, AC, ETL listed
➤Carriage speed is 52 slices per minute
➤Finish is stainless steel and sanitary anodized
aluminum; unit disassembles quickly without tools
for easy cleaning
➤45°Product table with gauge plate interlock. Front
mounted, articulating pusher and fence
➤Nominal 14” (350 mm) diameter; hollow ground,
hardened and polished forged chromium-plated
carbon steel knife
➤Carriage handles food up to 11” (280 mm) wide, by
8-1/2” (216 mm) high or 8-1/2” (216 mm) diameter
➤Precise slice adjustment to a thickness
of 3/4” (19 mm)
➤Built-in, non-removable, top-mounted, two
stone knife sharpener with single lever, dual-
action system
➤Permanent, tapered knife ring guard covers non-
slicing portion of knife even when the center plate
is removed; ring guard design provides more room
behind the knife for easy cleaning
➤No-Volt release prevents activation of the slicer in
the event of a power interruption; operator must
restart the slicer
➤Positive, moisture protected, on/off switches and
power indicator light
➤Attached 6-foot, flexible, 3-wire cord and plug for
grounded receptacle
Item #
Automatic Gravity Feed Slicer Model 839A
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX [phone] • www.berkel.com
Form #SPC04-0902N
Safety and Convenience Features
Berkel Model 839A automatic gravity feed slicer
features Berkel’s hollow ground chromium-plated,
carbon steel knife and built-in, single lever, dual-
action sharpener with convenient handle located on
the sharpener cover. The permanent, tapered guard
covers the non-slicing portion of the knife even when
the center plate is removed. The 45°table with gauge
plate interlock and front mounted, articulating pusher
and fence make product feed easier, creating more
consistent and uniform slices with less waste. The
single-speed carriage operates at 52 slices per minute.
The 1/2 HP motor, 14”knife and large product table
are ideal for handling oversize meats, cheeses and a
variety of other products. The 839A slicer is easy to
clean and disassembles quickly without tools.
Approved By:
Date
Model 839A

Form #SPC04-0902N © 2002 Berkel Company Litho in U.S.A.
Berkel Company • 4406 Technology Drive • South Bend, IN 46628-9700
574-232-8222 • 800-348-0251 • FAX [phone] • www.berkel.com
Automatic Gravity Feed Slicer Model 839A
Model 839A
Automatic Gravity Feed Slicer
Specifications
Motors: Separate 1-speed, 1/2 HP, totally enclosed
motors for the knife and carriage, permanently
lubricated ball bearings, thermally protected.
Electrical: Furnished in 115/60/1, 5.8 amp, AC,
ETL listed.
Carriage Speed:52 slices per minute.
Finish/construction: All food contact areas are
stainless steel or anodized aluminum including the
pusher, gauge plate, product table, center plate,
knife ring guard and one-piece base. Slicer disas-
sembles quickly without tools for easy cleaning.
Knife: Nominal 14” (350 mm) diameter, hollow
ground, hardened and polished forged chromium-
plated carbon steel.
Cutting Capacity: Carriage handles food up to 11”
(280 mm) wide by 8-1/2” (216 mm) high or 8-1/2”
(216 mm) diameter
Slice Thickness: Precision system provides infinite
slice adjustment and consistent cuts of hard or soft
foods from tissue thin to 3/4” (19 mm).
Full Gravity Feed: Full 45°angle feed with GPI
requres less mechanical pressure. Equipped with
a front-mounted, articulating, anodized aluminum
pusher and fence to hold product with less waste.
Knife Sharpener: Built-in, top-mounted, two
stone, single lever, dual-action system for a lasting,
razor-sharp edge.
Knife Ring Guard: Permanent, tapered guard
covers non-slicing portion of knife edge even when
the center plate is removed. The ring guard is
designed to provide added room behind the knife
for easy cleaning.
No-Volt Release: Prevents activation of the slicer in
the event of a power interruption. Operator must
restart the slicer.
On/Off Switch: Highly reliable, moisture resistant,
on/off switches and power indicator light.
Cord and Plug: Attached 6-foot, flexible, 3-wire cord
and plug for grounded receptacle.
Warranty: All parts, service and travel coverage for
one year, excluding wear items.
As we continually strive to improve our products, specifications
are necessarily subject to change without notice.
Model No. Cutting Carriage Slice Knife Product Dimensions
Capacity Speed Thickness Diameter Width A Depth B Height C
839A 11” (280mm) wide 52 SPM to 3/4” 14” 25” 29” 29”
8-1/2” (216 mm) high (19 mm) (350mm) (635 mm) (737 mm) (737 mm)
8-1/2” (216 mm) dia
Motor Electrical Weight Box Dimensions
Width Depth Height
1-speed 115/60/1 Net 138 lbs. (63 kg.) 34” 30” 37”
1/2 HP Ship 170 lbs. (77 kg) (864 mm) (762 mm) (940 mm)
AB
C