Bernafon SOUNDGATE User manual

PHONE ADAPTER
Phone calls – Daily use
USER GUIDE

Intro
This user guide explains how the SoundGate is used for
phone conversations.
The Phone adapter provides a wireless connection be-
tween your SoundGate and your home phone. It supports
both incoming and outgoing phone calls. The SoundGate
enables hands free operation.
First of all make sure that the Phone adapter is correctly
connected to both the phone land line and power. Please
refer to the installation guide.
The wireless phone application is possible within a
range of approx. 10 meters (30 feet) from the Phone
adapter.
USER GUIDE

SoundGate overview
Phone button
•Short press:
Receiver off
for out going
calls or
Accept
incomming
calls or
Disconnect
calls
PHONE ADAPTER
Bluetooth®button
•Short press:
on
•Long press:
off
•Very long press:
Start pairing
mode
Volume control
•Short press:
Volume up/down
Battery status
indicator
Phone calls can also be received when the keys are locked!
Key lock
Operate
Locked

USER GUIDE
Incoming calls
Before talking
Wear the SoundGate around your neck using the neck
strap. Make sure that the Bluetooth®function on the
SoundGate is switched on. You must be within 10 meters
(30 feet) of the Phone adapter and its red status indicator
must be steadily illuminated.
Incoming calls
A ringing tone will be heard in the hearing instru-
ments and the green rim light around the phone
button will ash.
Answer
Give a short press to the SoundGate phone button.
The SoundGate will answer the call and the green
rim light will stop ashing and will be steadily illu
minated. The call is now directed into the hearing
instruments. Speak normally, as if the other person
was sitting in front of you. The red status indicator
on the Phone adapter will ash during the call.
Hang up
Give a short press to the SoundGate Phone button.
The SoundGate will hang up the call and the green
rim light will turn off.
The red status indicator on the Phone adapter will
now be steadily illuminated.
03.09/BAG/956-80-210-00/subject to change
Status
Status

Outgoing calls
Make an outgoing call
Give a short press to the SoundGate phone button
or shortly press the red phone button on the Phone
adapter.
You will hear a dial tone in the hearing instruments.
The green rim light will be steadily illuminated.
Pick up the receiver or press the call button on the
phone and quickly dial the phone number. Once the
call is nished replace the receiver or press end call
on the phone.
The red status indicator on the Phone adapter will ash
during the call.
Hang up
Give a short press to the SoundGate phone button.
The SoundGate will disconnect the call and the
green rim light will turn off.
The red status indicator on the Phone adapter will now
be constantly illuminated.
Make sure that the phone is turned off again, or the
receiver is replaced!
PHONE ADAPTER
Status
Status

Notice: Your voice level to your conversation partner is
automatically adjusted by the SoundGate, but you should
always speak loudly and clearly. If necessary speak directly
into the microphone of the SoundGate.
PHONE ADAPTER