Billion BiGuard 50G User manual

21
THE BiGuard 50G

2
CONNECTING THE BiGuard 50G
O
Ou ut t o of f B Bo ox x
Carefully unpack the BiGuard 50G and
check that the following items are in-
cluded.
1. BiGuard 50G x 1
2. Power adapter x 1
3. Warranty card x 1
4. Software CD x 1
5. Ethernet cable x 1
6. Quick Start Guide x 1
F
Fr ro on nt t a an nd d R Re ea ar r V Vi ie ew w
1. Power LED
2. Status LED
3. LAN 1~4 LEDs,
4. WAN 1 & 2 LED
5. 10/100 LED
6. LINK/ACT LED
7. Wireless Antenna
8. WAN 1 & 2 RJ-45 connector
9. LAN 1~4 RJ-45 connectors
10. RESET button
11. DC 12V connector
N
NO OT TE E: :
Ensure that the BiGuard 50G is
turned off before beginning
setup.

Ensure that your hardware is pow-
ered off, including the BiGuard 50G.
Connect an RJ-45 Ethernet cable
to the WAN port on the BiGuard
50G, connect the other end to an
ADSL or cable modem or another
router.
Connect switches, hubs, and
servers to the LAN ports on the
BiGuard 50G.
Connect the power adapter cable to
the DC 12V connector on the
BiGuard 50G. Connect the power
adapter to an electrical outlet.
After the power is connected. The
LEDs will all blink and after a
couple of seconds LEDs will all
blink again. Soon after the status
LED light will turn off and BiGuard
50G will be ready for operation.
L
Lo og gg gi in ng g I In n
You can configure and manage the
BiGuard 50G with the Web Manager.
The Web Manager is a web-based inter-
face that you can access from any web
browser.
In the Address field of your Web
browser, type the default IP
address: “192.168.1.254”
B.
C.
D.
E.
A.
A.

23
CONFIGURING THE WAN
A Security Alert screen appears.
Click Yes to continue. The login
screen appears.
Type the default user name and
password:
User Name: admin
Password: admin
Then click OK. The Web Manager
opens on the Status menu.
C
Co on nf fi ig gu ur ri in ng g t th he e W WA AN N f fo or r P PP PP Po oE E
To configure the WAN for PPPoE, you
need the following information from your
ISP provider and since BiGuard 50G is
Dual WAN, you can choose either WAN1
or WAN2 to complete the following setup:
User name
Password
DNS (if necessary)
(contact your ISP for more information)
Click Quick Start in the Menu bar.
Click Quick Star WAN1 or WAN2.
The Quick Start WAN screen opens.
Select PPPoE from the Protocol
drop-down menu.
Type the user name in the User-
name field.
Type and confirm the password in
the Password and Retype Pass-
word fields.
B.
C.
A.
B.
C.
D.
E.

H.
Select Always On or Connect on
Demand from the Connection
drop-down menu. If you select
Connect on Demand, the following
Idle Timeout field will become
available.
Type the number (of minutes) in the
Idle Timeout field. If your connec-
tion is Connect on Demand, you
are disconnected after the idle
timeout period.
Click Apply to confirm the settings.
C
Co on nf fi ig gu ur ri in ng g t th he e W WA AN N f fo or r S St ta at ti ic c I IP P
To configure the WAN for static IP, you
will need the following information from
your ISP provider. You can set up to 4
static IPs all at once
IP address
Subnet mask
Gateway
DNS
Click Quick Start in the Menu bar.
Click WAN. The Quick Start WAN
screen opens.
Select Static IP from the Protocol
drop-down menu.
Type the IP address in the IP as-
signed by your ISP field.
F.
G.
A.
B.
C.
D.

Type the subnet mask in the IP
Subnet Mask field.
Type the gateway in the ISP Gate-
way Address field.
Type the primary/secondary DNS in
the Primary DNS and Secondary
DNS fields.
Click Apply to confirm the settings.
C
Co on nf fi ig gu ur ri in ng g t th he e W WA AN N f fo or r D DH HC CP P
Click Quick Start in the Menu bar.
Click WAN. The Quick Start WAN
screen appears.
Select Obtain an IP Address
Automatically from the Protocol
drop-down menu.
Check Obtain DNS Automatically
if your ISP provides this with the
assigned IP. Otherwise, enter the
Primary and Secondary DNS pro-
vided by your ISP.
Click Apply to confirm the settings.
Congratulations. You successfully
finished the BiGuard 50G router
configuration.
E.
F.
G.
H.
A
.
B.
C.
D.
E.
F.