Billion BiPAC 5400SW Installation and operation manual

Billion Electric Co., Ltd.
8F, No.192, Sec.2, Chung Hsing Road,
Hsin Tien District, New Taipei City, Taiwan
TEL: [phone]
FAX: [phone]
E-mail: [email protected]
www.billion.com
BiPAC 5400SW
Wireless-N 150Mbps Single Ethernet ADSL2+
Firewall Router
Ideal for
SOHO and
Residential
Users
• Base on Wireless-N
Technology, and compliant with
IEEE 802.11g, 802.11b
standards
• High-speed wireless connection
up to 150Mbps
• Wireless-N AP with Wi-Fi
Protected Setup (WPS), Wi-Fi
Protected Access (WPA-PSK/
WPA2-PSK) and Wired
Equivalent Privacy (WEP)
• High speed Internet access with
ADSL2/2+; backward
compatible with ADSL
• With 1-port
10/100Mbps.Ethernet interface
• SOHO firewall security with DoS
prevention and SPI
• Universal Plug and Play (UPnP)
• Supports Virtual Private Network
(VPN) pass-through
• Dynamic Domain Name System
(DDNS)
• Easy network management
Express Internet Access
Complying with worldwide ADSL standards, the BiPAC 5400SW supports downstream data
transmission rates of up to 12/24 Mbps with ADSL2/2+, 8 Mbps with ADSL, and performs at
upstream rates of up to 1 Mbps. Moreover, the BiPAC 5400SW includes Annex M technology that
supports the latest ADSL2/2+ standard for higher upload speeds by increasing the upstream
operation rate to approximately 2.5Mbps (up to 3Mbps under ideal conditions). With this technology,
you can enjoy even higher-speed broadband multimedia applications such as interactive gaming,
video streaming and real-time audios that run faster and easier than ever.
Upgraded Wireless Access
With an integrated 802.11n Wireless Access Point that supports up to 150Mbps wireless operation
rate, your wireless connection is truly improved compared to the 802.11g standard, yet this router
can switch compliance with 802.11b/g network devices. Wireless Protected Access (WPA-PSK /
WPA2-PSK) and Wired Equivalent Privacy (WEP) features enhance the level of transmission
security and access control over your Wireless LAN.
Robust Security
The NAT default firewall has an advanced anti-hacker pattern-filtering protection feature - Denial of
Service (DoS) that can automatically detect and block hacker attacks. In addition, packet filtering
features provides high-level security for access control. With Stateful Packet Inspection (SPI)
feature, the router enables users to determine whether a data packet is allowed to pass through the
firewall to the private LAN.
Easy Network Management
A user-friendly, web-based user interface makes installing and managing the BiPAC 5400SW
extremely simple. With support for both DHCP client and server, system administrators can manage
IP assignment without having to reconfigure other stations and fitting the router into existing network
environments is as easy as a breeze!

Billion Electric Co., Ltd.
8F, No.192, Sec.2, Chung Hsing Road,
Hsin Tien District, New Taipei City, Taiwan
TEL: [phone]
FAX: [phone]
E-mail: [email protected]
www.billion.com
Notes:
1. This router may require firmware modification for certain ADSL2/2+/Annex M DSLAMs.
2. IPTV application may require subscribing to IPTV services from a Telco / ISP.
3. Actual throughput and performance depends on the environment. Normally, the wireless speed is faster if you are closer to the router.
The farther from the router you are, the more wireless range, and the speed will be slower.
4. Only upon request for Telco / ISP Project.
5. Specifications on this datasheet are subject to change without prior notice.
V.01172012
ADSL Compliance
•Compliant with ADSL Standards
- Full-rate ANSI T1.413 Issue 2
- G.dmt (ITU G.992.1)
- G.lite (ITU G.992.2)
- G.hs (ITU G.994.1)
- ADSL over ISDN/U-R2
•Compliant with ADSL2 Standards
- G.dmt.bis (ITU G.992.3)
- ADSL2 Annex M (ITU G.992.3 Annex M)
(available for BiPAC 5400SWA model only)
•Compliant with ADSL2+ Standards
- G.dmt.bis plus (ITU G.992.5)
- ADSL2+ Annex M (ITU G.992.5 Annex M)
(available for BiPAC 5400SWA model only)
Network Protocols and Features
• NAT, static routing and RIP-1/2
• Multi-to-multi NAT
• Transparent Bridging
• Dynamic Domain Name System (DDNS)
• Virtual Server and DMZ
• SNTP, DNS relay and IGMP proxy
Firewall & Virtual Private Network (VPN)
• Built-in NAT Firewall
• Stateful Packet Inspection (SPI)
• Prevents DoS attacks including Land Attack, Ping
of Death, etc.
• Anti probe function
• Packet filtering, MAC filtering, URL filtering
• Password protection for system management
• VPN pass-through
Wireless LAN
• Based on Wireless-N Technology, and
compliant with 802.11g, 802.11b standards
• Up to 150Mbps wireless operation rate
• 2.4 GHz–2.484 GHz frequency range
• 64/128 bits WEP supported for encryption
• Wireless Security with WPA-PSK/ WPA2-PSK
ATM and PPP Protocols
• ATM Adaptation Layer Type 5 (AAL5)
• Multiple Protocol over AAL5
(RFC 2684, formerly RFC 1483)
• Bridged or routed Ethernet encapsulation
• VC and LLC based multiplexing
• PPP over Ethernet (PPPoE)
• PPP over ATM (RFC 2364)
• OAM F4/F5
• ATM QoS: UBR, CBR, VBR-rt, VBR-nrt
Management
• Web-based configuration
• Firmware upgrades and configuration data
transfers via web-based interface
• SNMP v1/ v2, MIB supported
• Supports DHCP server/ client/ relay
•Supports TR-069*3
Operating Environment
• Operating temperature: 0℃- 40℃
• Storage temperature: -20℃- 70℃
• Humidity: 20% - 95% non-condensing
Hardware Specifications
Physical Interface
• DSL: ADSL port
• Ethernet: 1-port 10/100M auto-crossover
(MDI/MDI-X) Ethernet interface
• WLAN on/off + WPS button
• Factory default reset button
• Power jack
• Power switch
• WLAN: 1 antenna
Physical Specifications
• Dimensions: 4.72” x 3.74” x 1.22”
(120mm x 95mm x 31mm)
Power Requirements
• Input: 12V DC, 0.5A
Models & Supported Standards
• BiPAC 5400SWA: Supports Annex A and
Annex M
• BiPAC 5400SWU: Supports Annex B and
U-R2
• Annex A and Annex M: ADSL over POTS
• Annex B and U-R2: ADSL over ISDN
Features & Specifications