Biolase Epic T Series User manual

Founded in 1986, BIOLASE, Inc. specializes in lasers for medicine
and dentistry that feature proprietary and patented technologies for
minimally invasive surgeries, reducing pain and improving clinical
results.
Only BIOLASE combines the leading laser technology – continuously
improved through ongoing clinical R&D and engineering – with
unmatched training, practice integration support and service.
BIOLASE leads the global dental laser market with over 21,000 lasers in
use today and the most complete family of dental lasers – from diode
lasers to the most advanced all-tissue laser, the WaterLase iPlus™.
About BIOLASE
BIOLASE, Inc.
4 Cromwell
Irvine, CA 92618 USA
949.361.1200
888.424.6527
biolase.com
MT Promedt Consulting GmbH
Altenhofstrasse 80
D-66386 St. Ingbert/Germany
[phone]
mt-procons.com
©2014 BIOLASE, Inc. All rights reserved. EPIC, iLase, ezLase, ezTip, LaserWhite, Deep Tissue Handpiece,
ComfortPulse, WaterLase, and WaterLase iPlus are either trademarks or registered trademarks of BIOLASE,
Incorporated in the United States and/or other countries. All other trademarks are property of their registered
owners. Subject to change without notice.
One Color
(silk screen, laser etch, etc.)
Full Color
(print, web, etc.)
TM
TM
TM
User Manual
EPIC T User Manual P/N 5400478 Rev B
Made in the USA
One Color
(silk screen, laser etch, etc.)
Full Color
(print, web, etc.)
TM
TM
TM
EPIC_T-Series-UserManual_Cover_5400478-RevB.indd 1 10/17/2014 1:35:14 PM

Page Left Blank

1 INTRODUCTION .............................................................................................................. 6
2 INDICATIONS FOR USE .................................................................................................. 7
4 SPECIFICATIONS ............................................................................................................ 9
4.1 General ........................................................................................................................................ 9
4.2 Electrical ...................................................................................................................................... 9
4.3 Laser. ........................................................................................................................................... 9
4.4 Other Light Sources ..................................................................................................................... 9
5 EQUIPMENT DESCRIPTION ......................................................................................... 10
5.1 System Components .................................................................................................................. 10
5.2 General ....................................................................................................................................... 11
Base Console ............................................................................................................................. 12
Fiber Delivery System ................................................................................................................. 12
Deep-Tissue Handpiece . ........................................................................................................... 12
Wireless Footswitch .................................................................................................................... 12
6 SAFETY WITH THE EPIC T .......................................................................................... 13
6.1 Safety Instructions ...................................................................................................................... 13
6.3 Safety Features .......................................................................................................................... 15
Energy Monitor ........................................................................................................................... 15
3
6.2 Safety Classification ................................................................................................................... 14
System Monitor ........................................................................................................................... 15
Power Switch .............................................................................................................................. 15
Access Key Code ....................................................................................................................... 15
Control Button ............................................................................................................................. 15
Wireless Footswitch .................................................................................................................... 16
Epic T User Manual
Control Button............................................................................................................................. 12
3 CONTRAINDICATIONS, WARNINGS, AND PRECAUTIONS ....................................... ..7
3.1 Contraindications .......................................................................................................................... 7
3.2 Warnings and Precautions ............................................................................................................ 7
Prescription Statement ................................................................................................................. 7
Training ......................................................................................................................................... 7
Eyewear ........................................................................................................................................ 8
Treatment, Technique and Settings ............................................................................................ ..8
Clinical Environment ..................................................................................................................... 8
Contents

4
Remote Interlock ......................................................................................................................... 16
Emergency Stop ......................................................................................................................... 16
Functional Display ...................................................................................................................... 16
7 INSTALLATION AND SETUP ........................................................................................ 17
7.1 System Setup ............................................................................................................................. 17
7.2 Connecting the Fiber Optic..........................................................................................................17
7.3
7.4
7.5
7.6
Connecting/Disconnecting the Deep-Tissue Handpiece ............................................................ 18
7.7
Operation - Turn on the Epic T ................................................................................................... 20
7.8
Home Screen .............................................................................................................................. 20
7.9
Settings Screen .......................................................................................................................... 21
7.10 Ready Mode................................................................................................................................. 23
7.11 Wireless Footswitch......................................................................................................... ............ 23
7.12 Using the Epic T Touch Screen Display......................................................................................... 24
7.13 Turn the Laser Console Off ........................................................................................................ .25
8 CLINICAL APPLICATION .............................................................................................. 26
Contents
Pairing the Footswitch to the Laser Console.................................................................................. 21
Control Button ............................................................................................................................. 22
Entering Ready or Standby Modes ............................................................................................. 23
Pain Therapy Preset Values ....................................................................................................... 26
Pain Therapy - Adverse Effects ................................................................................................ . 27
Pain Therapy - Warnings and Precautions ............................................................................... 28
Epic T User Manual
9 MAINTENANCE ............................................................................................................. 29
9.1 Daily Maintenance ...................................................................................................................... 29
9.4 Fiber Cable Lens Inspection and Cleaning ..................................................................................30
Lens Inspection Procedure ..........................................................................................................30
Cleaning the Lens ....................................................................................................................... 30
9.5 Installing/Replacing the Console Battery Pack ........................................................................... 30
Changing the Wireless Footswitch Batteries .............................................................................. 31
9.7 Transportation ............................................................................................................................. 32
9.8 Storage ....................................................................................................................................... 32
9.2 Disinfecting the Fiber Optic Cable .............................................................................................. 29
9.3 Disinfecting the Deep Tissue Handpiece..................................................................................... 29
9.6
Recommended Use .................................................................................................................. . 26
Facility Requirements.................................................................................................................. 17
8.1 Overview ..................................................................................................................................... .26

Epic T User Manual
10 CALIBRATION ............................................................................................................... 33
11 SOFTWARE SPECIFICATION .......................................................................................33
12 TROUBLESHOOTING ................................................................................................... 33
APPENDIX A- ACCESSORIES .......................................................................................... 36
APPENDIX B- LABELING .................................................................................................. 37
APPENDIX C- SAFETY - LITHIUM-ION BATTERY PACKS ............................................. 41
APPENDIX D- ELECTROMAGNETIC COMPATIBILITY .................................................... 43
APPENDIX E- WIRELESS EQUIPMENT COMPLIANCE STATEMENT ............................ 47
5
Contents

6
Epic T User Manual
The Epic™ T Series diode laser system is a medical device that provides a therapeutic and non-
invasive way to treat pain, working as a topical heating device to temporarily increase blood circulation.
It is effective for chronic and acute musculoskeletal conditions, including back and neck pain, injuries
from accidents, and athletic injuries to muscles and joints.
Epic T Series utilizes a solid state diode as a semiconductor source for invisible infrared radiation. The
energyisdeliveredtothetreatmentsiteviaa flexible fiberconnectedatoneendtothelasersource
andthe other end to the Handpiece. The device is activated by means of a wireless Footswitch.
This is a prescription device that is indicated for professional use only by licensed medical
practitioners. The use of this device requires proper clinical and technical training. This manual
provides instructions for those professionals that have completed the appropriate training.
When used and maintained properly, the Epic T Series will prove a valuable addition to your practice.
Please contact BIOLASE customer service at 1-800-321-6717 in the U.S. for any service needs; if you
are located outside the U.S., please contact your BIOLASE-authorized distributor.
1 Introduction

Epic T User Manual 7
3.1 CONTRAINDICATIONS
All clinical procedures performed with Epic T must be subjected to the same clinical judgment and care
used with traditional techniques. Patient risk must always be considered and fully understood before
clinical treatment. The clinician must completely understand the patient’s medical history prior to
treatment and exercise caution for general medical conditions that might contraindicate a local
procedure; such conditions may include, but are not limited to, allergy to local or topical anesthetics,
heart disease (including pacemakers and implantable defibrillators), lung disease, bleeding disorders,
sleep apnea, an immune system deficiency, or any medical conditions or medications that may
contraindicate the use of certain light/laser-type sources associated with this device, including general
neurovascular conditions which can reduce a patient's pain sensitivity while undergoing pain therapy
procedures (e.g., patients with neurodegeneration associated with Type II diabetes). Medical clearance
from the patient’s physician is advisable when doubt exists regarding treatment.
3.2 WARNINGS AND PRECAUTIONS
PRESCRIPTION STATEMENT
U.S. Federal Law restricts this device to sale by or on the order of a dentist or other licensed dental
practitioner.
TRAINING
Only licensed professionals who have reviewed and understood this user manual should use this
device. BIOLASE assumes no responsibility for parameters, techniques, methods, or results.
Physicians must use their own clinical judgment and professional knowledge to determine all aspects
of treatment, including technique, power settings, pulse interval, duration, etc.
3 Contraindications, Warnings, and Precautions
2 Indications for Use
The Epic T Series diode laser is intended for topical heating for the purpose of elevating tissue
temperature for a temporary relief of minor muscle and joint pain and stiffness, minor arthritis pain, or
muscle spasm, minor sprains and strains, and minor muscular back pain; the temporary increase in
local blood circulation; the temporary relaxation of muscle.
(Refer to Section 8 for Clinical procedure details.)

8
Epic T User Manual
3 Contraindications, Warnings, and Precautions
TREATMENT, TECHNIQUE, AND SETTINGS
Use your clinical judgment to determine all aspects of treatment including, but not limited to, the laser
treatment protocol, technique, power settings, mode of operation, treatment duration, as well as the
accessories (e.g., tip type) and other procedural requirements. Closely observe and monitor clinical effects
and use your judgment to determine the clinical parameters and approach for the treatment. Make
appropriate power, pulse length, and interval adjustments to compensate for varying tissue compositions,
density, and thickness. Always start treatment at the lowest power setting for the specific indication and
increase as required. BIOLASE assumes no responsibility for parameters, techniques, methods, or results.
CLINICAL ENVIRONMENT
Only use this device in clinical environments that observe proper standard aseptic techniques.
CAUTION: The specifications for the protective eyewear provided with the Epic T
laser system are marked on the side of the glasses. Always check the eyewear
specifications marked on the glasses to ensure they offer the required protection
for the specific laser wavelength.
For additional information, refer to the instructions for use provided with the glasses.
EYEWEAR
Doctor, patient, assistand, and all others inside or entering the operatory must wear appropriate
laser protective eyewear suitable for the 940 nm ± 10 nm wavelength, OD4 (DIR LB4) or greater,
whenever the laser is in use. Prior to use, inspect eyewear for pitting and/or cracking. Replace
if damaged; do not use.

Epic T User Manual 9
4.1 GENERAL
• Dimension(WxLxH)
• Weight
4.2 ELECTRICAL
• Operating voltage
• Frequency
• ExternalFuses
• Main control
• Remote Interruption
•Disable Control
• Battery
•DC Power Supply Module
4.3 LASER
•LaserClassification
• Medium
• Wavelength
•MaxPowerOutput
• Power Accuracy
• Power Modes
•Spot Size
• NOHD (Nominal Ocular Hazard Distance)
•MPE (Maximum Permissible Exposure)
• Beam Divergence
• Standard Fiber Cable Length
4.4 OTHER LIGHT SOURCES
• AimingBeam
4 Specifications
5.7inx6.5inx4.4in(14.5cmx11.2cmx16.5cm)
2.5 lbs / 1 kg
100V - 240V ~ at 1.5A
50 / 60 Hz
None
Main Power Switch (ON/OFF Control Button).
Remote interlock
Emergency Stop Button
Lithium Ion Rechargeable, 14.4 V, 2.9 Ah
12V DC, 5A
IV(4).
InGaAs Semi-conductor diode
940 ± 10 nm
10W
± 20%
Continuous
30 mm diameter = 7.1 cm2 area
2.71 meters
30W/m2
7 - 22° per side angle
5 feet (1.5 meters)
Laser diode, max 1 mW, 625 nm – 670 nm, Class 2

Epic T User Manual
5.1 SYSTEM COMPONENTS
The Epic T laser system includes the following:
1. Laser Console
2. ScreenProtectorsBox(Peel-offClearScreenCover-qty.25)
3. Fiber Optic Cable (Installed)
4. Laser Protective Eyewear (qty. 3)
5. Deep Tissue Handpiece (qty. 1; packaged/shipped separately)
6. Deep Tissue Handpiece Disposable Shields (qty. 20; packaged/shipped separately)
7. DC Power Supply Module
8. Power Cord (U.S.) (qty. 1)
9. Power Cord (International) (qty. 1)
10. Welcome Kit (Includes User Manual and Quick Setup Guide).
11. Laser Warning Sign
12. Remote Interlock Cable
13. Footswitch
14. Philips-Head Screwdriver (For Installing Footswitch Batteries)
15. AAA Batteries (qty. 2).
10
WARNING: No modification of this equipment is allowed.
5 Equipment Description

11
Epic T User Manual
5.2 GENERAL
The Epic T system consists of three components:
Figure 4.1
Wireless Footswitch
5 Equipment Description
Handpiece
Fiber Optic Assembly
Spacer

5 Equipment Description
Figure 4.2
Figure 4.3
Figure 4.4
Footswitch
Cover
Epic T User Manual
BASE CONSOLE
The base console is portable, contains the diode laser and all the elements which power the laser,
and has a touchscreen which allows the user to navigate from screen to screen, select procedures,
enter and/or change settings, etc. (Figure 4.1).
CONTROL BUTTON::
Activates the controls and display; places the laser into Standby, Ready, or Sleep mode.
LED Indicators: Amber = Standby mode
Green = Ready mode
Green (blinking) = Laser is firing
Blue (blinking) = Pairing active
FIBER DELIVERY SYSTEM
ThefiberdeliverysystemconsistsofFiberOpticCable,the
reusableDeep Tissue Handpiece,andtransmitslaserradiation
fromthelaserconsolethroughtheHandpieceto the target tissue.
The laser ships from the factory with the Fiber Optic Cable
already attached to the base console
(Figure 4.2).
DEEP TISSUE HANDPIECE
The Deep Tissue Handpiece is a re-usable Handpiece used
for pain therapy (Figure 4.3). The Handpiece is equipped
with disposable non-sterile shields for single-patient use.
The shields are applied to the spacer and discarded after
one-time use.
WIRELESS FOOTSWITCH
The Epic T laser will only emit laser energy when the user
presses down on the Footswitch while the laser is in
Ready mode. It is designed to work using wireless
technology and is powered by two AAA batteries which are
installed prior to shipment from the factory; it is already
paired to the base console.
The Footswitch is protected by a metal cover. To access,
first press down on the cover to unlatch it, then press the
Footswitch to fire the laser (Figure 4.4)
12

Failuretocomplywiththeprecautionsandwarningsdescribedinthisusermanualmayleadtoexposure
to dangerous optical radiation sources. Please comply with all safety instructions and warnings.
6 Safety with the Epic T
WARNING: Use of controls or adjustments or performance of procedures other than
those specified in this User Manual may result in hazardous radiation exposure.
6.1 SAFETY INSTRUCTIONS
Follow these safety instructions before and during treatments:
•When the laser is in use, all operatory entrances must be marked with an appropriate warning
sign (included - see Appendix B)
•Do not operate in the presence of explosive of flammable materials. Flammable anesthetics or
oxidizing gases such as nitrous oxide (N2O) and oxygen (O2) should be avoided. Solvents of
adhesives and flammable solutions used for cleaning and disinfecting should be allowed to
evaporate before laser is used. Attention should also be drawn to the danger of ignition of
endogenous gases.
•All persons present in the operatory must wear laser protective eyewear.
Always ensure that the laser protective eyewear is appropriate for the laser wavelength; refer to
the markings on the eyewear itself for the specifications of the protection provided.
•Do not look directly into the beam or at specular reflections.
•Never direct or point the beam at a person's eyes.
•Always place the system into Standby mode (by pressing the control button while in Ready
mode) before connecting the Deep Tissue Handpiece to the Fiber Optic Cable.
•Always ensure that the proper laser parameters are set before the Epic T laser is used in a
clinical procedure.
•Toggle the ON/OFF switch (located on the rear of the console) to the OFF (O) position before
leaving the unit unattended.
•Do not use the laser if the Fiber Optic cable is damaged or broken.
•Do not use the laser if there's a suspicion it is not functioning properly or other than as described
in this User Manual.
Epic T User Manual 13

Epic T User Manual
LASER WARNING: DO NOT open the console housing at any time. Danger from
optical radiation may exist.
DO NOT aim the laser at metallic or reflective surfaces, such as surgical insturments
or mirrors. If aimed directly at these surfaces the laser beam will reflect creating a
potential hazard.
14
CAUTION: This laser system has been designed and tested to meet the requirements of
electromagnetic, electrostatic, and radio frequency interference standards. However, the
possibilityofelectromagneticorotherinterferencemaystillexist.Relocatingthedevice
mayhelp to eliminate the interference.
CAUTION: High temperatures produced in the normal use of this laser equipment may
ignite some materials (e.g., cotton wool when saturated with oxygen); solvents or
adhesives and flammable solutions used for cleaning and disinfecting should be allowed
to evaporate before the laser equipment is used.
CAUTION: DO NOT position this equipment so that it is difficult to pull the plug from
the power source.
CAUTION: To avoid the risk of electric shock, this equipment must only be connected
to a supply mains with protective earth.
6 Safety with the Epic T
6.2 SAFETY CLASSIFICATION
The following safety classifications are applicable to the device:
•Laser radiation – Class 4.
•Aiming beam – Class 2.
•Type of protections against electrical shock – Class 1.
•Degree of protection against electrical shock – Type B applied part.
•Not protected against water ingress – Ordinary equipment.
•Not suitable for use in presence of flammable anesthetic mixture.
•Operation mode – Continuous and pulse mode.
•Wireless footswitch – IPX6.

Epic T User Manual
Figure 6.1:
Power Switch, DC Power Input,
Remote Interlock
Figure 6.2:
DCPower Supply Module
15
6.3 SAFETY FEATURES
ENERGY MONITOR
The energy monitor measures and verifies power output.
Power deviations of more than ± 20% from the selected
value will cause the display to show the error message:
“LASER CURRENT HIGH/LOW”.
The laser console will not operate until the system first clears the
error and then goes into Ready mode. If the error message
persists, please contact BIOLASE Service at 1-800-321-6717 or
your BIOLASE-authorized service representative.
SYSTEM MONITOR
The system monitors the emergency stop switch, remote key,
wireless Footswitch connection, and output power. An error in any
one of these will stop the system. The text display will indicate the
type of error. Operation cannot resume until the error is cleared.
POWER SWITCH
The laser console can be switched ON ( I ) or OFF (O) using the
power switch on the back of the console. Turn the power switch
OFF (O) only when the system will not be in use for a long period
of time.
ACCESS KEY CODE
The Access Key Code (888) prevents unauthorized use of the
system. It is activated every time the system is turned ON with the
power switch.
Placing the laser in Sleep mode by pressing and holding the
Control button on the front panel of the console does not re-set
the access key code.
CONTROL BUTTON
Once the power switch is set to the ON ( I ) position, enter the
access key code. After setting the desired parameters for a
procedure, press the CONTROL button on the control panel to
enter into Ready mode. The aiming beam will illuminate to
indicate that the system is ready for use.
6 Safety with the Epic T

16
Epic T User Manual
Figure 6.3:
Wireless Footswitch
CAUTION: Use only the DC Power Supply Module supplied with the Epic T laser system.
(BIOLASE P/N 2400075)
Figure 6.4:
Remote Interlock Connector
Figure 6.5:
Emergency Laser Stop
6 Safety with the Epic T
WIRELESS FOOTSWITCH
The Epic T will not emit laser energy until the user presses down
on the Footswitch while the laser is in Ready mode. The
Footswitch is designed to work using wireless technology (Figure
6.3).
REMOTE INTERLOCK
This feature allows the laser to be connected to a remote sensor
which prevents it from firing when the sensor is triggered. To install
the remote interlock (Figure 6.4), insert the plug at the end of the
connector into the rear of the laser console and attach the two
wires at the other end to a door switch; the laser will stop
immediately when the connection to the door switch is deactivated,
i.e., when the door is opened.
EMERGENCY STOP
Press the red emergency laser stop button to instantly turn off the
laser console (Figure 6.5). The message “Emergency Switch Error”
will appear on the console display and the amber LED will begin
flashing. To clear the error, press the emergency laser stop button
again; in 2 to 5 seconds the amber LED will stop flashing and the
system will automatically go into Standby mode.
FUNCTIONAL DISPLAY
The system color display with touch screen and LED indicators on
the control panel shows the functional conditions of the system.

Figure 7.2: Optical Access Port
Figure 7.1: Fiber Optic Cable Access Plug
Epic T User Manual
• Place the unit in a clean, dry, and well-ventilated area; do not cover or block the ventilation
channels.Thesechannelsprovideanair-flowpathtocooltheunit.
• Verify the power switch is in the OFF (O) position.
• Epic T will work using either DC power or its rechargeable battery pack


7.2 CONNECTING THE FIBER OPTIC CABLE
The Epic T ships with the Fiber Optic Cable already connected to the laser console.
17
NOTE: The laser ships with the lithium ion battery pack already installed.
CAUTION: Do not connect or disconnect the fiber cable while the laser console is
turned ON. Only connect or disconnect the fiber when the laser console is turned OFF.
DC Power: Connect the DC power supply module to the laser console, attach one end of the power
cord to the DC power supply module and plug the other end of the power cord into a wall outlet.
Rechargeable Battery: The Epic T is shipped with the battery pack already installed; to charge
the battery pack, connect the power cord of the DC power supplymodule tothelaserconsoleand
plugintoawalloutlet.Beforefirstuse,fullychargethebattery(at least 3 hours). Once the battery
is charged, unplug the power cord from the wall outlet and the laser console. The laser console will
run on battery power alone. To fully charge the battery, plug the DC power supply module in and
then turn the laser console ON ( I ) at the power switch. The laser console will start to charge and
the unit will go into Sleep mode (the screen is dark) after 5 minutes; if the DC power supply module
is plugged in but the console is turned OFF (O) at the power switch, the battery will still charge, but
at a slower rate.
FACILITY REQUIREMENTS
Electrical Supply: 100V-240V ~ at 1.5A, 50/60Hz
Environmental: Temperature 15-35 ºC (59-95 ºF), Humidity 10-90%, non-condensing
7 Installation and Set-Up

18
Epic T User Manual
7 Installation and Set-Up
7.3 CONNECTING/DISCONNECTING THE DEEP TISSUE HANDPIECE
The Deep Tissue Handpiece is a reusable accessory and is provided with disposable non-sterile
protective shields designed for single patient use. The Handpiece is non-sterile and requires disinfection
before and after each patient use. This Handpiece cannot be sterilized in the autoclave, as doing so
will damage its internal optics. For instruction on how to clean and disinfect the Handpiece, please refer
to Section 9.
Always wipe the disposable shield with alcohol prior to use. These shields are for single-use only to avoid
cross-contamination and must be discarded after one-time use.
Figure 7.3: Deep Tissue Handpiece
To connect the Handpiece to the Fiber Optic Cable:
•Make sure the laser is turned OFF.
•Make sure the Fiber Optic Cable is connected to
the laser console (Section 7.2).
•Remove yellow cap dust cover from the distal end
of the Deep Tissue Handpiece (Figure 7.4).
Figure 7.4
CAUTION: Do not bend the Fiber Optic Cable at a sharp angle, as it can break. Make
sure it is not caught or pinched between the housing and the fiber optic access plug.
To disconnect the Fiber Optic Cable from the laser console, make sure the laser console is
turned off and the cable is completely unwound from the console base, grab the
Fiber Optic Cable access plug and slowly pull it straight back from the optical access port (Figure 7.1).
To re-install the Fiber Optic Cable, make sure the laser console is turned off. The Fiber Optic
Cable is attached to the console by inserting the optical access plug (Figure 7.1) into the optical access
port (Figure 7.2).
For storage, wind the cable in the fiber storage channel around the base of the console in a
counterclockwise direction.

Epic T User Manual
•Connect the Deep Tissue Handpiece to the Fiber
Optic Cable by sliding it over the fiber shaft until it
clicks into place and is secured (Figure 7.5). If no
click is audible, disconnect the Handpiece and then
re-install it.
•Set the spot size to 30mm by loosening the lock
ring and sliding the spacer to the 30mm spot size
detent location (Figure 7.6); tighten the lock ring to
prevent the spacer from moving during treatment.
•Place the protective shield over the spacer
(Figure 7.7).
NOTE: Refer to the individual Instructions for Use included with the Deep Tissue
Handpiece packaging for additional details.
19
7 Installation and Set-Up
NOTE: When not in use, protect the lens of the Handpiece
from debris; store in a safe and clean environment. Clean
any debris that appears on the lens using a cotton swab
moistened with isopropyl alcohol.
Figure 7.5
Figure 7.7
Figure 7.6
Protective Cap
Fiber Shaft
The Handpiece is now ready to use.
To disconnect the Handpiece from the Fiber Optic
Cable, press and hold both buttons at the base of the
fiber shaft and gently pull the Handpiece to separate
(Figure 7.5).

20
Epic T User Manual
7.4 OPERATION - TURN ON THE EPIC T
Operate with the battery or connect the DC power supply
module to the power connector on the laser console and plug
the cord into a wall outlet.
Turn the power switch at the rear of the console to the ON ( I )
position. The “BIOLASE” logo screen will appear. After three
(3) seconds the Epic T “Welcome” screen will be displayed.
• Enter the three digit access code using the touch screen. The
access key code is 888. (If the incorrect code is entered, an
‘X’appearsbrieflyinthewindow;pressthe‘X’orwait3
seconds to revert back to the welcome screen; re-enter the
correct code.
•ThesystemwillgototheHOME screen.
•Settings icon (bottom center): Accesses the settings
screen; allows the user to make changes to several system
settings, including language.
•Laser console battery indicator (upper right corner):
Displays console battery charge level.
•Wireless signal strength indicator (upper left hand
corner): Displays the strength of the wireless connection
between the Footswitch and laser console.
Figure 7.8
Figure 7.9
7 Installation and Set-Up
7.5 HOME SCREEN
The Home screen offers the following access
and information: