Birlea COMPTON CORNER TV UNIT User manual

COMPTON CORNER TV UNIT
IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR COMPTON CORNER TV UNIT.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.
HEALTH & SAFETY:
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push this product as this will cause damage.
Always lift this product with two people to repositions.
Keep any sharp objects away from this product.
ASSEMBLY INSTRUCTIONS
www.birlea.com Page of 9
Vendor: S000350
1

2
Page of 9
Vendor: S000350
Parts List Hardware List ( BOX 1 )
Part Descripion Qty Part Description Qty
** You will need a small mallet and a screwdriver for assembly.
** Some screws and wooden dowel may remain.
01 1
Top panel
02
03
04
05
06
07
08
09
10
Bottom panel
Drawer side ( Right )
1
1
1
1
1
1
Side panel ( Left )
Side panel ( Right )
Drawer side ( Left )
A2
Cam lock
Minifix screw
B
Plastic cap
M8 x 30mm Wood Dowel
C
D
E
F
G
H
I
J
M6 x 50mm CSK Cap Wood screw
M3.5 x 16mm C.B Screw
32
32
32
40
8
28
4
Allen key M4 1
6
3
20
10
M4 x 38mm C.B Screw
A1
A3
Drawer back
1
1
1
1Hinges 90 V
10'' Drawer slide (Left / Right)
2
2
M
N1
15
16
N2
1
Middle panel
1
Top bone
K
L
S125 - Double Hole Fitting 2
2
17
1
Center panel
Side plate ( Right ) 1
2
Box
1
1
1
1
11
12
13
14
Back side panel ( Right )
Back panel
Back side panel ( Left )
Drawer front
Drawer bottom
18
Drawer bone
19
Door panel
20
Center leg panel21
1
1
1
1
Side bone ( Left )
Side bone ( Right )
M4 x 32mm C.B Screw
M4 x 65mm C.B Screw
5/8 PVC Nail Leg
5/8 NAIL
PVC Handle 525-192
10'' Drawer slide (Left / Right)
01
02
03
04
05
06
07
08
09 10
11
12
13
14
15
16
17
18
19
20
21
L
L
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1

Page of 9
Vendor: S000350
Step 1: Prepare these parts for assembly using hardware parts A1, A2, B, E, F, L, M and N1.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
N1
N1
N1
EEE
x2 x2 x2
01
02
03
04
05
06
07
08
09
10
11
12
15
16
17
19 21
A2 X10
A1 X4
A1 X2 A2 X2
BX4
BX2
A1 X4
BX8
A1 X2
BX2
A1 X2
BX2
A1 X5
A2 X2
BX5
A2 X4
A1 X5
BX5
A1 X4
BX6
A2 X1
A2 X2
A2 X2
A1 X1
BX1
BX1
A1 X1
BX2
A1 X2
A2 X6
F
M
E
E
L
20
BX2
14
A2 X3
X2
X2 X2
X2
3

4
Page of 9
Vendor: S000350
Step 2: Fix hardware K into top bone (7), side bone (8), (9) with hardware E and a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 3: Attach center panel (5) to middle panel (6) using hardware A1 and A2 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Attach center panel (10) to middle panel (2) using hardware G with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A3 x 2
E x 4
07
08
09
K
E
K x 2
05
06
02
10
G x 2
G
G
A1
A2
A1
A3

5
Page of 9
Vendor: S000350
Step 5: Attach bottom panel (2) to center panel (5) using hardware C and D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 6: Attach side panel (3) and (4) to bottom panel (2) and middle panel (6) using hardware A1 and A2 with
a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 7: Attach back side panel (11) and (12) to bottom panel (2) and middle panel (6) using hardware C and D.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
C x 2
D
C
D
02
05
06
02
03
04
05
06
A3 x 6
A1
A2
A1
A3
C
D
C x 6
D02
03
04
05
06
11
12

6
Page of 9
Vendor: S000350
Step 8: Attach top panel (1) to side panel (3), (4), center panel (5), back side panel (11) and (12) using
hardware A1 and A2 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 9: Attach top bone (7), side bone (8) and (9) to top panel (1) side panel (3) and (4) using hardware A1
and A2 with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 10: Attach center leg panel (21) to middle panel (2) using hardware H with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
A3 x 10
A1
A2
A1
A3
A1
A1
A3
A2
01
02
03
04
05
11
12
A3 x 10
01
02
03
04
07
09
08
02
03
21
04
H x 3
H

7
Page of 9
Vendor: S000350
Step 11: Hit hardware J into bottom of side panel (3), (4) back side panel (11), (12) and center leg panel
(21).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
03
04
08
09 11
12
21
J x 10
Step 12: Assemble panel (13) to entire body with hardware I.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
02
04
05
06
11
12
13
21 I x 20

8
Page of 9
Vendor: S000350
N2
N2
N2
E
E
E
E
E
E
N2
N2
N2 17
15
14
19
18
E x 6
N2 x 2
( L/R )
Step 13: Assemble the drawer components using hardware A3, D, E, F, G, L and N2.
In this step only show one of the drawers.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
1. Fix hardware L onto panel (14) by using hardware F.
2. Attach the drawer side (16) and (17) to the drawer back (15) using hardware part (G).
3. Slide in the drawer bottom (18).
4. Attach the drawer bone (19) to drawer back (15) then attach the drawer front (14) to drawer side
(16), (17) and drawer bone (19) using hardware A1 and A2 with a screwdriver (not provided).
5. Attach the hardware part (N2) to the drawer sides (16) and (17) using hardware part (E).
A1 A3
A1
A2
G
G
D
A3 x 4
15
16
17
17
15
18
15
17
18
14
19
F x 2
16
16
16
G x 4
F
14
L
L x 1

Page of 9
Vendor: S000350
9
Step 15: Attach door panel (20) to side bone (8) using hardware E with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Additional Information:
· For complete product information, images and dimension diagrams please visit the website
www.birlea.com
· If you have any issues with your item please contact the retailer directly you purchased it from
who will be able to resolve any issues with Birlea.
· Why don't you send us photos of your assembled furniture to [email protected] to be shared in
our #birleahome feature on instagram.
Step 14: Assemble the drawers in place along the drawer slides.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
N2
N1 N1
N2
Vertical
Adjustment
Horizontal
Adjustment
Depth
Adjustment
E x 8
01
02
03
04
08
09
14
20
01
04
09
14
07
08