Birlea ALFIE STORAGE BED User manual

Page 1 of 10
ASSEMBLY INSTRUCTIONS
135 CM ALFIE STORAGE BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING
YOUR 135 CM ALFIE STORAGE BED.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Birlea advise you use the wall straps provided to further enhance the safety of this product.
CARE & MAINTENANCE:
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean surface
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots,
grains, clusters or indentations.
On unpacking the item you may notice an odour due to production processes but this will disappear
after a period of time.
DO NOT place the item next to a radiator or direct sunlight - this item is susceptible to temperature
change. It is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet - do not use soap and water,
detergents, aerosol sprays or any polish as use of these materials would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
Vendor: S000398
www.birlea.com

Page 2 of 10
** WARNING: THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
PARTS LIST HARDWARE LIST: Carton 1 of 1
Part Description Qty
Part Description Qty
1 Headboard Top Panel 1
A
CAM NUT 15mm
37
B
CAM BOLTC
WOOD DOWEL M6 x 25mm
45
D
E
JCBC SCREW M6 x 50mm
F
H
I
PVC NAIL
8
NAIL
Carton 1 of 3:
2 1
3 1
4
5
11
12
13
14
WOOD DOWEL M8 x 50mm
6
7
1
Vendor: S000398
J
K
** You will need a screwdriver and a small mallet
( NOT provided)
17
18
Footboard Left Panel 1
8
8
12
61
L
STICKER
M
N
DOUBLE END BOLT 7mm
O
P
21
Drawer Left Panel
Drawer Right Panel
CSK SCREW M4 x 30mm
1
1
3
1
G JCBCW SCREW M5 x 40 mm 6
STEEL NUT M6 8
CSK SCREW M4 x 38mm
ALLEN KEY M6
NYLON CASTOR 40-STOP
CSK SCREW M3.5 x 16mm
8
12
15
1
16
27
1
2
3
4
5
66
6
7
8
10 10
13
14
11
12
16
17
18
19
20
15
21 15
15
15
15
15
9
Headboard Back Panel
Footboard Right Panel
Footboard Top Panel
Footboard Bottom Panel
Headboard Left Panel
Headboard Right Panel
Headboard Center Panel
Headboard Bottom Panel
Headboard Divider Panel
Headboard Front Panel
1
1
1
1
1
14
10
15
16
Base Support Panel
19 Drawer Back Panel
20
Base Panel
Drawer Front Panel
Drawer Bottom Panel
6
2
1
1
1
Part Description Qty
Carton 2 of 3:
8Left Side Panel
9Right Side Panel
1
1
Part Description Qty
Carton 3 of 3:

A,F
Page 3 of 10
1A37
B
C45
F
Insert hardware part B & part C & part H using a screwdriver (not provided). Insert hardware
part A & part D & part F using a small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
H
12
D
61
Vendor: S000398
8
8
C
C
C
C
C
C
C
C
C
C
C
CC
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
B
B
B
B
B
B
H
H
H
H
A
A
A
A
B
B
A
A
A
A
A
A
H
H
H
H
A
A
A
A
B
B
B
A
A
A
A
B
BA
A
C
C
C
C
BB
B
B
BB
B
B
B
B
B
BB
BB
B
B
B
B
FF
F
F
B
B
B
B
C
C
C
C
B
C
C
C
C
C
C
C
C
B
B
B
B
A
A
A
B
BB
B
AA
B
B
BB
F
F
F
F
D
D
D
D
1
2
3
4
5
8
10 x2pcs
6 x3pcs
7
D
D
7
11
12
13
14
16
20
17 18
D
D
9
D
C
A
H
A
A
A
A
B
B
C
B
B
D
D

Page 4 of 10
Attach the Headboard Divider Panel (6) to Headboard Center Panel (4) and Headboard
Divider Panel (6) to Headboard Bottom Panel (5) with Screw (G) by using allen key (J) and
tighten clockwise.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
2
3Attach the Headboard Divider Panel (6) to Headboard Center Panel (4) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000398
G6
G
G
G
GG
G
6
6
6
4 5
J
G
Lock
C
B
B
Unlock
4
6
J1

4
5
Page 5 of 10
Vendor: S000398
Attach the Headboard Front Panel (7) to Headboard Bottom Panel (5) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Attach the Headboard Left Panel (2) and Headboard Right Panel (3) to Headboard Center Panel (4) and
Headboard Bottom Panel (5) and Headboard Front Panel (7) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Lock
C
B
B
Unlock
5
7
Lock
C
B
B
Unlock
7
5
4
2
3

Page 6 of 10
6
7
Vendor: S000398
Attach the Headboard Top Panel (1) to Headboard Left Panel (2) and Headboard Right
Panel (3) and Headboard Divider Panel (6) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Lock
C
B
B
Unlock
6
3
2
1
O
O
21
3
2
Attach the Headboard Back Panel (21) with Nail (O) by small mallet (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
O27

Page 7 of 10
Vendor: S000398
8
9Insert hardware part E to Footboard Left Panel (11) and Footboard Right Panel (12).
Attach the Footboard Left Panel (11) and Footboard Right Panel (12) to Footboard Top
Panel (13) and Footboard Bottom Panel (14) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
E 8
I
I
I
I
8
9
10
10
7
J
I
Lock
C
B
B
Unlock
B
E
B
EBB
E
E
13
14
11
12
Attach the Left Side Panel (8) and Right Side Panel (9) to Headboard Front Panel (7) with
Screw (I) by using allen key (J) and tighten clockwise.
Attach the Base Support Panel (10) to Headboard Front Panel (7) by screwdriver (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
I4
J1

Page 8 of 10
Vendor: S000398
10
11
Attach the Footboard Left Panel (11) and Footboard Right Panel (12) to Left Side Panel (8)
and Right Side Panel (9) with Screw (I) by using allen key (J) and tighten clockwise.
Attach the Footboard Top Panel (13) and Footboard Bottom Panel (14) to Base Support
Panel (10) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
I
I
I
I
K
15
15
15
15
15
15
11
12
8
9
10
10
Attach the Base Panel (15) with Screw (K) by screwdriver (not provided).
Cover screw hole with sticker (P) as shown.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
K
11
12
I4
12
P
13
14
J
I
K
K
K
K
K
K
K
K
K
K
K
K
P
P
P
P
PP
PPPP
PP
PP
14

Page 9 of 10
Vendor: S000398
12
MFix Castor (M) using Screw (N) onto Drawer Bottom Panel (20) by screwdriver (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
16
N
13 8
L
L
L
L L
L
L
L
L
L
L
L
LL
L
19
17
18
20
M
M
M
M
M
M
M
M
N
N
M
N
Fix Drawer Left Panel (17) and Drawer Right Panel (18) to Drawer Back Panel (19) with
screw (L) by screwdriver (not provided).
Attach the Drawer Bottom Panel (20) to Drawer Left Panel (17) and Drawer Right Panel
(18) and Drawer Back Panel (19) with Screw (L) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
L 15
L
20

Page 10 of 10
Vendor: S000398
.Additional Information:
.For complete product information, images and dimension diagrams please visit the website www.birlea.com
.If you have any issues with your item please contact the retailer directly you purchased it from who will be able to resolve any
issues with Birlea.
.Why don't you send us photos of your assembled furniture to [email protected] to be shared in our #birleahome feature on
lnstagram.
14
15
Lock
C
B
B
Unlock
20
16
18
17
16
Attach the Drawer Left Panel (17) and Drawer Right Panel (18) and Drawer Bottom
Panel (20) to Drawer Front Panel (16) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.