Birlea JESSICA 3' BED User manual

Vendor: S000053
Page 1 of 4
ASSEMBLY INSTRUCTIONS
JESSICA 3’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR JESSICA 3’ BED
FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If th s bed s placed on a non-carpeted floor you must place some protect on under all legs to stop
the bed frame from mov ng. If th s s not adhered to there s no guarantee f the bed frame collapses.
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000053
Page 2 of 4
Parts L st Hardware L st (found n box 1)
Part Descr pt on Box Qty Part Descr pt on Qty
1 Headend 1 1 A M6 x 16 mm JCBC Screw 8
2 Footend 1 1 B M6 x 45 mm JCBC Screw 2
3 Side Support 2 2 C M6 Nut 2
4 Mid Support 2 1 D Single Slat Cap 24
5 Slat 3 12 E Finial 4
** M4 Allen Key prov ded

Vendor: S000053
Page 3 of 4
Step 1: Fix the side support (3) to the headend (1) and footend (2) using hardware part but do not fully
tighten yet.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 2: Place the mid support (4) on top of the side supports (3) and tightly secure using hardware parts B
and C.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Vendor: S000053
Page 4 of 4
Step 3: Place hardware part D onto each end of every slat (5) then press firmly into the side supports (3).
Insert hardware part E to the bed posts.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.