Birlea MONTANA 5' BED User manual

Vendor: S000084
Page 1 of 4
ASSEMBLY INSTRUCTIONS
MONTANA 5’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR MONTANA 5’
BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If thi bed i placed on a non-carpeted floor you mu t place ome protection under all leg to top
the bed frame from moving. If thi i not adhered to there i no guarantee if the bed frame collap e .
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000084
Page 2 of 4
Part Li t Hardware Li t
Part De cription Box Qty Part De cription Box Qty
1 Headend 1 1 A M8 x 25 mm JCBC Screw 1 8
2 Footend 1 1 B ¼ “ x 60 mm JCBC Screw 2 6
3 Side Rail 2 2 C ¼ “ x 15 mm JCBC Screw 2 4
4 Cross Bar 2 2 D Hex Nut 2 6
5 Centre Rail 2 1 E Double Slat Cap 2 13
6 Support Leg 2 2 F Single Slat Cap 2 26
7 Slat 3 26 G Spanner 2 1
H M4 llen Key 2 1
I M5 llen Key 1 1
Step 1: Fix the side rails (3) to the headend (1) and footend (2) using hardware parts and I but do not fully
tighten the screws at this point.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000084
Page 3 of 4
Step 2: ttach the cross bars (4) to the side rails (3) using hardware parts B, D, G and H. Fully tighten the
screws from step one at this point.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 3: ttach the support legs (6) to the centre rail (5) using hardware parts C and H, then attach the rail to
the cross bars (4) using hardware parts B, D, G and H.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000084
Page 4 of 4
Step 4: Join the slats (7) together using hardware parts E and F and press firmly into the centre rail (5) and
side rails (3).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.