Birlea DENVER 3' BED PINE User manual

Vendor: S000107
Page 1 of 3
ASSEMBLY INSTRUCTIONS
DENVER 3’ BED PINE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR DENVER 3’ PINE
BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If th s bed s placed on a non-carpeted floor you must place some protect on under all legs to stop
the bed frame from mov ng. If th s s not adhered to there s no guarantee f the bed frame collapses.
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000107
Page 2 of 3
Parts L st Hardware L st (found n box 1)
Part Descr pt on Box Qty Part Descr pt on Qty
1 Headend 1 1 A ¼ “ x 100 mm Bolt 8
2 Footend 1 1 B 7 x 120 mm Bolt 3
3 Side Rail 1 2 C 7 x 100 mm Bolt 3
4 Slat 2 12 D 4 x 35 mm Screw 24
5 Plinth 2 2 E 10 x 40 mm Wooden Dowel 4
** You w ll need a small mallet and a
screwdr ver (not prov ded).
F Elliptical Nut 8
G llen Key 1
H Spacer Block 2
Step 1: ttach a plinth (5) to the headend (1) using hardware part C. ttach the remaining plinth (5) to the
footend (2) using hardware part B.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Vendor: S000107
Page 3 of 3
Step 2: ttach the side rails (3) to the headend (1) and footend (2) using hardware parts , F and E with the
llen key provided.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 3: Fix the slats (4) to the side rails (3) using hardware parts D and H whilst applying pressure to each
side, working at the ends towards the middle.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.