Birlea WINCHESTER CORNER TV UNIT User manual

Assembly Instructions
Thank you for
purchasing a
Birlea product.
Forachancetowina Love 2 Shop voucher
simplypostapictureofyournewproduct
onyourpreferredsocialchannelstagging
Birlea Furniture and using the hashtag
#ShareYourStyle and #Birlea .Onewinner
willbeselectedatrandomeachmonth.
To view our full terms and conditions please visit our website. www.birlea.com
Are you happy with your purchase?
Yes: That’sgreat,wewouldlovetohearmorefromyou.Pleaseleaveusareviewon
oursocialmediachannelsorTrustpilot.Yourfeedbackwillbegreatlyappreciated.
No: Ifforanyreasonthereissomethingmissing,indifferentorincorrectwith
yourorder,pleasecontacttheretaileryoupurchasedtheitemfrom.Wewill
workwiththeretailertoresolveyourissueasquicklyaspossible.
www.birlea.com

ASSEMBLY INSTRUCTIONS
WINCHESTER CORNER TV UNIT
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE
ASSEMBLING OR USING YOUR WINCHESTER CORNER TV UNIT.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damage or
worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of
children. Always use on a level, even
surface.
It is recommended that two people handle and assemble the item.
CARE & MAINTENANCE:
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean
surface Periodically check all screws & fixings to ensure
they are secure. DO NOT push the item as this will
damage the base.
Always lift the item with two people to
reposition. Keep any sharp objects away
from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots,
grains, clusters or indentations.
On unpacking the item you may notice an odour due to production processes but this will disappear
after a period of time.
DO NOT place the item next to a radiator or direct sunlight – this item is susceptible to temperature
change. It is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet - do not use soap and water ,
detergents, aerosol sprays or any polish as use of these would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
Page 1 of 7
www.birlea.com
Vendor: S000401
480mm
950mm
450mm

Page 2 of 7
Vendor: S000401
Hardware List
Part Item Qty
A Wooden dowel 18
B Cam Bolt 30
C Cam Lock 30
D Tack 25
E Slip Shoe 5
F 40mm Screw 2
G 14mm Screw 20
H Sticker 2
I Handle 2
J Side Slide 2
K Drawer Slide 2
L 25mm Screw 1
M Trapeze Fixation 1
2X
012345 6 78 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6
mm
Parts List
Part Item Qty
1 Right Side 1
2 Left Side 1
3 Base 1
4 Top 1
5 Division 1
6 Right Column 1
7 Left Column 1
8 Baseboard 1
9 Shelf 1
10 Traverse 1
11 Drawer Front 2
12 Drawer Back 2
13 Drawer Side 4
14 Drawer Bottom 2
15 Bottom Back 1
16 Upper Back 1
1
2
4
5
6
7
8
3
9
10
11
13
13
12
14
16
15

Page 3 of 7
Vendor: S000401
A
A
8
1
G
J
G
G
G
JA
2
B
B
G
J
B
B
4
B
B
67
Step 1: Insert the hardware (A) into the division (5), traverse (10), drawer side (13) and baseboard
(8). Then attach hardware (J) to the division (5) using hardware (G).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
Step 2: Insert the hardware (B) in the right side (1), left side (2), top (4), shelf (9), drawer front (11),
drawer back (12), right column (6) and left column (7). Then fix hardware (J) onto the right side (1)
and left side (2) using hardware (G).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
A
5
A
A
13
4X
B
B
B
B
11
12
2X
2X
10
B
G
9
B
B

Page 4 of 7
Vendor: S000401
Step 4: Attach the division (5) to the base (3) and shelf (9) using hardware (C), (A), (F) and
screwdriver (not provided).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
1
Step 3: Assemble the right column (6) and left column (7) to the right side (1) and left side (2) using
hardware (C).
Do NOT use any power tools are this may damage the frame and will invalidade any claim.
2
6
7
C
C
9
5
3
F
C