Birlea SANTIAGO User manual

Vendor: S000238
Page 1 of 9
ASSEMBLY INSTRUCTIONS
SANTIAGO 2 DOOR 1 SHELF FLAT SCREEN TV UNIT
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR SANTIAGO 2
DOOR 1 SHELF FLAT SCREEN TV UNIT.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
t is recommended that two people handle and assemble the item
CARE & MAINTENANCE:
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean surface
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots, grains,
clusters or indentations
On unpacking the item you may notice an odour due to production processes but this will disappear after a
period of time.
DO NOT place the item next to a radiator or direct sunlight – this item is susceptible to temperature change.
t is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water,
detergents, aerosol sprays or any polish as use of these materials would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor
www.birlea.com

Vendor: S000238
Page 2 of 9
Parts L st Hardware L st
Part Descr pt on Qty Part Descr pt on Qty
1 Top Panel 1 A Wooden Dowel 16
2 Right Panel 1 B 14 mm Screw 26
3 Right Centre Panel 1 C 35 mm Screw
28
4 Left Centre Panel 1 D 40 mm Screw 4
5 Left Panel 1 E 19 mm Bolt 2
6 Base Panel 1 F
Handle
2
7 Back Panel 1 G
Door Hinge
4
8 Right Front Frame 1 H
Clip
2
9 Front Frame 1 J Plug 2
10 Left Front Frame 1 K
Shelf Support
4
11 Shelf Panel 1 L Corner Bracket 1
12 Door 2 M Tack 26
13 Cleat 4 ** You will need a small mallet and a screwdriver.

Vendor: S000238
Page 3 of 9
Step 1: nsert the right panel (2) to the right front frame (8) making sure the parts are fully pushed together
and lined up. Place the cleats (13) between the marks shown and secure using hardware part C and a
screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000238
Page 4 of 9
Step 2: nsert the left panel (5) to the left front frame (10) making sure the parts are fully pushed together
and lined up. Place the cleats (13) between the marks shown and secure using hardware part C and a
screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m
Step 3: nsert hardware parts A and K using a small mallet (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000238
Page 5 of 9
Step 4: Attach the right centre panel (3) and left centre panel (4) to the base panel (6) using hardware part D
and a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m
Step 5: Attach the left panel (5) and front frame (9) using hardware part C using a screwdriver (not
provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000238
Page 6 of 9
Step 6: Attach the right panel (2) using hardware part C. Attach hardware part L using hardware part B. You
will need to use a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m
Step 7: Attach the top panel (1) using hardware part C and a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000238
Page 7 of 9
Step 8: Attach the back panel (7) using hardware part M and a small mallet (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m
Step 9: nsert the shelf panel (11).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000238
Page 8 of 9
Step 10: Attach hardware part G to the doors (12) using hardware part B, then attach hardware part F using
hardware part E. You will need to use a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m
Step 11: Attach the doors (12) using hardware part B and a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m

Vendor: S000238
Page 9 of 9
Step 12: Attach hardware parts H to the base panel (6) using hardware part B. nsert hardware part J to
hardware part H then push the doors shut to mark the wood. Secure hardware part J to the doors (12) using
hardware part B. You will need to use a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.