Birlea URBDBCRUS User manual

IMPORTANT : READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR BOOKCASE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Always use on a level, even surface.
CARE & MAINTENANCE:
Periodically check all screws & fixings to ensure they are secure.
DO NOT push this product as this will cause damage.
Always lift this product with two people to repositions.
Keep any sharp objects away from this product.
ASSEMBLY INSTRUCTIONS
www.birlea.com Page of 6
Vendor: S000350
1
URBAN DIAGONAL BOOKCASE
ASSEMBLY:
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber inside the accessories pack.

2
Page of 6
Vendor: S000350
Parts List Hardware List
Part Descripion Qty Part Description Qty
01 2
02
03
04
05
2
1
3
A
B
CM3.5 x 16mm C.B Screw
Allen key M4 1
Top/Bottom panel
Shelf panel-A
1
** You will need a small mallet and a screwdriver for assembly.
** Some screws and wooden dowel may remain.
** Note : To secure the item to the wall, hardware E ( 2 pcs ) and F ( 2 pcs ) are not provided.
42
JCBC screw M6 x 40mm 8
D
E
F
8'' x 1'' PP tape 2
Wall plug -
-
M4 x 38mm C.B Screw
Shelf panel-B
Shelf panel-C
Shelf panel-D
06
07
08
1
1
4
Metal Front
Metal Back
Metal Support
01
01
02
03
05
06
07
08
04
02
04
04
08
08
08

3
Page of 6
Vendor: S000350
Step 1: Attach Metal Front (6) and Metal Back (7) to Metal Support (8) using hardware A and B.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 2: Attach Top panel (1) to Metal Front (6) and Metal Back (7) using hardware C
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
06
07
08
01
A
B
A
B x 6
06
07
08
08
08
C
C x 4
01
06
08
08
08
06

4
Page of 6
Vendor: S000350
Step 3: Attach Shelf panel (2), (3) and (5) to Metal Front (6) and Metal Back (7) using hardware C
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Step 4: Attach Shelf panel (4) to Metal Front (6) and Metal Back (7) using hardware C
with a screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
06
07
08
01
04
02
05
06
07
08
01
02
03
08
08
C
C x 20 06
02
C
C x 12
04
06
04
04
08