BIXOLON SLP-DL410B User manual

User's Manual
Label Printer
Rev. 1.0
0
SLP
-
DL
4
1
0
B
SLP-DL413B
http://www.bixolon.com

Rev. 1.00
-
2
-
SLP
-
DL
4
10
B
/DL41
3
B
■ Table of Contents
※ MANUAL INFORMATION & USAGE PRECAUTIONS ........................................................................................ 4
1. CONTENT CONFIRMATION ................................................................................................................................... 9
2. PRODUCT PART NAMES ....................................................................................................................................... 10
3. INSTALLATION & USAGE ..................................................................................................................................... 12
3-1 POWER CONNECTION ............................................................................................................................................. 12
3-2 INTERFACE CABLE CONNECTION ............................................................................................................................. 13
3-3 PAPER INSTALLATION ............................................................................................................................................. 15
3-4 BUTTON AND LED ................................................................................................................................................. 16
3-5 TEST PRINTING ....................................................................................................................................................... 18
4. SELF-TEST ............................................................................................................................................................... 19
5. DETAILED FEATURES ........................................................................................................................................... 20
5-1 PRINTER SETTING USING UTILITY PROGRAM ............................................................................................................. 20
5-2 STAND-ALONE CONFIGURATION MODE ................................................................................................................... 21
5-3 PAUSE / CANCEL ..................................................................................................................................................... 22
5-4 MEDIA CALIBRATION.............................................................................................................................................. 23
5-5 SMART MEDIA DETECTION ..................................................................................................................................... 24
5-6 GAP SENSOR AUTO CALIBRATION MODE ................................................................................................................. 24
5-7 BLACK MARK SENSOR AUTO CALIBRATION MODE .................................................................................................. 25
5-8 MANUAL CALIBRATION MODE ................................................................................................................................ 26
5-9 COVER CLOSING MODE .......................................................................................................................................... 27
5-10 DATA DUMP MODE ............................................................................................................................................... 27
5-11 FACTORY RESET ................................................................................................................................................... 28
5-12 THE PEEL-OFF(OPTION) ....................................................................................................................................... 28
5-13 AUTO CUTTER(OPTION) ........................................................................................................................................ 30
5-14 REAL-TIME CLOCK(OPTION) ................................................................................................................................ 31
6. BLUETOOTH CONNECTION (IOS,ANDROID) ................................................................................................... 32
6-1 PRECAUTIONS ........................................................................................................................................................ 32
6-2 BLUETOOTH CONNECTION INSTRUCTIONS ............................................................................................................... 32
6-3 SSP MODE SETTING ............................................................................................................................................... 33
6-4. SSP MODE CHECK ................................................................................................................................................ 34
7. CLEANING HEAD ................................................................................................................................................... 35
7-1 CLEANING HEAD .................................................................................................................................................... 35
7-2 CLEANING SENSORS, ROLLER OR/AND PAPER PATH .................................................................................................. 36
8. APPENDIX ................................................................................................................................................................ 37

Rev. 1.00
-
3
-
SLP
-
DL
4
10
B
/DL41
3
B
8-1 SPECIFICATIONS ..................................................................................................................................................... 37
8-2 LABEL TYPES ......................................................................................................................................................... 37

Rev. 1.00
-
4
-
SLP
-
DL
4
10
B
/DL41
3
B
■ Manual Information
※ Manual Information & Usage Precautions
This user’s guide contains basic information for product usage as well as for emergency
measures that may be required.
※ The following separate manuals provide more detailed content on various technological
issues and areas.
1. Windows Driver Manual
This manual provides information on the install
ation instructions and main functions
of the Windows Driver.
2. Unified Label Printer Utility
-
II
Manual
This manual provides information on the usage of software for function selection of
this product, operating condition modification, etc.
3. Progra
mming
(
SLCS) Manual
This manual provides information on label printer commands.
4. True Font Downloader Manual
This manual provides information on the usage of the font downloader that can
download True Fonts and facilitate their usage as Device Fonts.
5.
Network User
Manual
This manual provides information on the configuration and usage of Ethernet
interface.
We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality
of all our products. In following, product specifications and/or user’s guide content may be
changed without prior notice.

Rev. 1.00
-
5
-
SLP
-
DL
4
10
B
/DL41
3
B
■ Safety Precautions
In using the present appliance, please keep the following safety regulations in order to
prevent any hazard or material damage.
WARNING
Violating following instructions can cause serious injury or death.
Do not bend the cable by force or leave it under any
heavy object.
• A damaged cable can cause a fire.
Do not plug in or unplug with your hands wet.
• You can be electrocuted.
Keep the plastic bag out of children’s reach.
• If not, a child may put the bag on his head.
Do not pull the cable to unplug.
• This can damage the cable, which is the origin of a fire or a
breakdown of the printer.
You must use only the supplied adapter.
• It is dangerous to use other adapters.
Do not plug several products in one multi-outlet.
• This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before usage.
• If the plug does not fit perfectly with the outlet, do not plug in.
• Be sure to use only standardized multi-outlets.
PROHIBITED
PROHIBITED
PROHIBITED
PROHIBITED PROHIBITED
ONLY SUPPLIED ADAPTER
PROHIBITED

Rev. 1.00
-
6
-
SLP
-
DL
4
10
B
/DL41
3
B
CAUTION
Violating following instructions can cause slight wound or damage the appliance.
Do not use the printer when it is out of order. This
can cause a fire or an electrocution.
• Switch off and unplug the printer before calling your dealer.
Do not let water or other foreign objects in the
printer.
• If this happened, switch off and unplug the printer before
calling your dealer.
Use only approved accessories and do not try to
disassemble, repair or remodel it for yourself.
• Call your dealer when you need these services.
• Do not touch the blade of auto cutter.
Install the printer on the stable surface.
• If the printer falls down, it can be broken and you can hurt
yourself.
Keep the desiccant out of children’s reach.
• If not, they may eat it.
If you observe a strange smoke, odor or noise from
the printer, unplug it before taking following
measures.
• Switch off the printer and unplug the set from the mains.
• After the disappearance of the smoke, call your dealer to
repair it.
TO UNPLUG
PROHIBITED
DISASSEMBLING
PROHIBITED
PROHIBITED
PROHIBITED
TO UNPLUG
PRINTER
PRINTER
PRINTER
PRINTER
DEALER
PRINTER

Rev. 1.00
-
7
-
SLP
-
DL
4
10
B
/DL41
3
B
■ Other Precautions
The copyright for this user’s guide and various other manuals is property of the BIXOLON
Corporation. Any copying or conversion into electronic firm and saving of this material without
the express written permission of BIXOLON Corporation. is strictly prohibited.
Use of the information contained in this manual is not subject to any patent liability. This
manual has been prepared with utmost care and attention to detail but may contain certain
errors and/or omissions.
BIXOLON Corporation. is not legally liable for any damages resulting from the use of the
information in this manual.
BIXOLON Corporation. and its affiliates are not legally liable(United States excluded) for any
damages, loss, costs, and/or expenses that result from the breakdown, malfunction, and/or
misuse of the product due to violation or neglect of the operation and maintenance
information and instructions provided by the BIXOLON Corporation., as well as from the
unauthorized alteration, repair, and/or modification of the product by the user and/or third
party.
BIXOLON Corporation. is not legally liable for any damages and/or issues resulting from the
use of options and/or parts that are not authentic BIXOLON products or authorized products.
WARNING
Use of an unprotected interface cable with this printer conflicts with EMC standards.
Users should only use cables approved by BIXOLON.

Rev. 1.00
-
8
-
SLP
-
DL
4
10
B
/DL41
3
B
WARNING – U.S.A
This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
NOTICE – Canada
This Apparatus complies with class “A” limits for radio interference as specified in the
Canadian department of communications radio interference regulations. Get appareil est
conforme aux normes class “A” d’interference radio tel que specifier par ministre canadien
des communications dans les reglements d’interference radio.
CAUTION
Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the user’s authority to operate the equipment.
■ WEEE(Waste Electrical and Electric Equipment)
This mark shown on the product or its literature indicates that the
corresponding item should not be discarded at the end of its working life with
other household waste. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, please separate marked items from
other types of waste and recycle them responsibly to promote the sustained
reuse of material resources. Household users should contact either the retailer where
they purchased this product, or their local government office for details of where and how
they can conduct environmentally safe recycling of such items. Commercial users should
contact their suppliers and check the terms and conditions of purchase contracts. This
product should not be combined with other commercial waste for disposal.
■ Rating Label Symbol Information
DC(Direct current)

Rev. 1.00
-
9
-
SLP
-
DL
4
10
B
/DL41
3
B
1. Content Confirmation
The following items should all be contained in the printer package.
Contact the dealer from which the purchase was made if any item is damaged and/or missing.
SLP-DL410/DL413
Power Cord CD
User’s Manual
※ Optional items
USB Cable

Rev. 1.00
-
10
-
SLP
-
DL
4
10
B
/DL41
3
B
2. Product Part Names
Feed Button
Cover Lever
Printer Head
Upper Gap Sensor
Cover-STD
Black-Mark & Notch Sensor
Pause Button
Paper Cover
Lower Gap Sensor
Paper Guide
Roller

Rev. 1.00
-
11
-
SLP
-
DL
4
10
B
/DL41
3
B
Power Switch
Fan
-
F
old
Slot
Power Jack
Auto Cutter
(Option)
Label Peel-off
(Option)
USB B-Type Cable USB A-Type
(WLAN Dongle)
AC Adapter

Rev. 1.00
-
12
-
SLP
-
DL
4
10
B
/DL41
3
B
3. Installation & Usage
3-1 Power Connection
Connect power to the printer as shown below.
1) Turn off the printer power switch.
2) Check to see that the AC adapter voltage matches that of the power source.
3) Connect the AC adapter jack to the printer power connector.
4) Connect the power cord to the AC adapter.
5) Connect the power cord to a power source/outlet.
OFF
Power Switch
Power Cord
AC Adapter

Rev. 1.00
-
13
-
SLP
-
DL
4
10
B
/DL41
3
B
3-2 Interface Cable Connection
3-2-1 Standard Model
Connect the interface cable as shown below.
This printer supports the following communications interface standards.
- USB A-Type(WLAN Dongle)
- USB B-Type Cable
1) Turn off the power switch.
2) Connect the communication cable to the printer communication port to be used.
- Connect USB A-Type(WLAN Dongle) to the HOST port.
- Connect USB B-Type cable to the USB port.
(This port requires a shielded cable less then 1.8m long.)
- It can connect by internal Bluetooth module.
USB B-Type Cable
USB A-Type
(WLAN Dongle)

Rev. 1.00
-
14
-
SLP
-
DL
4
10
B
/DL41
3
B
3-2-2 Ethernet Model
Connect the interface cable as shown below.
This printer supports the following communications interface standards.
- LAN(Ethernet) Cable
- USB A-Type(WLAN Dongle)
- USB B-Type Cable
1) Turn off the power switch.
2) Connect the communication cable to the printer communication port to be used.
- Connect the LAN(Ethernet) Cable to the ETHERNET port.
(This port requires a UTP cable(CAT5 or higher) less then 3.0m long.)
- Connect USB A-Type(WLAN Dongle) to the HOST port.
- Connect USB B-Type Cable to the USB port.
(This port requires a shielded cable less then 1.8m long.)
- It can connect by internal Bluetooth module.
USB B-Type Cable LAN(Ethernet) Cable
USB A-Type
(WLAN Dongle)

Rev. 1.00
-
15
-
SLP
-
DL
4
10
B
/DL41
3
B
3-3 Paper Installation
1) Open the Paper Cover.
2) Insert Fan-Fold Paper to Fan-Fold 3) Adjust the paper guide to the width of the
Slot. paper.
4) If you use Black-Mark or Notch paper roll, please lift up the paper and match the
sensor position adjust the black mark or notch hole.
5) Close the Paper Cover until a click sound is heard.
Moveable Black-Mark Sensor
and Notch Sensor
●
Paper Cover
Fan-Fold Paper
Fan-Fold Slot
●
Paper Guide

Rev. 1.00
-
16
-
SLP
-
DL
4
10
B
/DL41
3
B
3-4 Button and LED
3-4-1 Button Operations
Printer state
before
operation
Button
Operation procedure Printer operation mode
Feed/
Cancel Pause
Power OFF Press -
• Apply power while
pressing the button
(Hold the button until the
printer starts self-test
printing)
Self-test Printing Mode.
Print
Standby Press - • Press the button softly and release it Feed Mode
Print
Standby - Press • Press the button for two seconds
Stand-alone
configuration Mode
During
printing Press -
• Press the button for two
seconds Print Cancel Mode
During
printing - Press • Press the button softly and release it Print Pause Mode

Rev. 1.00
-
17
-
SLP
-
DL
4
10
B
/DL41
3
B
3-4-2 LED indicator for various printer statuses
LED 1 LED 2 Printer Status
Color Status Color Status
Green On Green On Print standby
mode Print standby mode
Red On Orange On Error mode Paper jam(gap/black mark is
not recognized)
Red On Green Blink Error mode Printer head overheating
Red On Red Blink Error mode Paper Cover open
Red On Orange Blink Error mode No paper
Red On - Off Error mode Media calibration failure
Red Blink Red Blink Error mode Auto-Cutter error
Orange On Orange On Mode switching
notification Mode switching notification
Green Blink Red On Wait for input Print is paused temporarily.
Wait for button input
Green Blink Green Blink Wait for input Cover Close Mode. Wait for
button input
Green On Red Blink Wait for input Print Cancel Mode. Wait for
button input

Rev. 1.00
-
18
-
SLP
-
DL
4
10
B
/DL41
3
B
3-5 Test printing
3-5-1 Printing using Windows driver
1) Install the Windows driver.
Refer to the “Windows driver manual” in the CD for the installation procedure.
2) Set the “port” of Windows driver to the appropriate interface to be used. Refer to the
“Network user manual” in the CD when using Ethernet interface.
3) Print the test page using the “Print test page” function of Windows driver.
3-5-2 Printing using label design program
- The label design program is included in the CD.
1) Install the label design program.
2) Print the test page after designing a label.

Rev. 1.00
-
19
-
SLP
-
DL
4
10
B
/DL41
3
B
4. Self-Test
The self-test checks whether the printer has any problems.
(Users cannot perform this procedure if using the printer’s label peel-off option.)
- Firmware version, printer configuration information, printing quality checking pattern,
and peripheral configuration information, etc.
If there is no problem according to self-test result, please check other device(s) or software(s).
This function is operated independently with other device(s) or software(s).
If the printer does not function properly, contact an authorized dealer.
The self-test checks the following;
1) Make sure that the paper roll has been installed properly.
2) Turn on the power while holding down the FEED button. The self-test begins.
(It takes about 5 seconds before starting self-test)
3) The self-test prints the current printer configuration information.
4) After the self-test results are printed out, a printer enters into Print Standby Mode.

Rev. 1.00
-
20
-
SLP
-
DL
4
10
B
/DL41
3
B
5. Detailed features
5-1 Printer setting using utility program
Various printer settings can be changed using the utility program(Unified Label Utility-II).
Functions that can be used with the utility program are as follows.
1) Basic printer settings
Paper size, printing speed and density, paper type can be configured.
2) Language setting
Code page can be configured.
3) Media sensor manual calibration function
This function can be used to detect special type or special material paper that is not
detected through automatic calibration function. Refer to Manual Calibration mode
page for more details
4) Other functions for printer test are also provided.
Refer to the Unified Label Utility-II Manual contained in the CD for more detailed information.