BJ Live SHX Soap Bubble Machine User manual

c.Mare de Déu del Coll, 70,Local|08023|Barcelona|Spain|t.+34 93 285 04 37|fax + 34 93 553 56 34| [e-mail] | www.bjliveat.com
BJ-EX46 SHX Soap Bubble Machine
Instructions manual

BJ_EX46 SHX Bubbles
Page 2
Instructions manual
BJ-EX46 SHX Soap Bubble Machine
1_Components of SHX Soap Bubble Machine
SHX Bubbles Enabler Socket+
2_Configuration of SHX Bubbles and Enabler Socket+
Remove the product's packaging in a suitable way
Please read the whole manual to familiarise yourself with the
characteristics before using the device.
1.1_Contents
Unpack the products from their boxes and check the contents. Enclosed with SHX
Bubbles there should be a 220V (AC) 50Hz to 3V (DC) adapter and a user manual, in
another box there should be an enabler socket+ with its instruction manual. It is
recommended to keep the boxes for the duration of the warranty period in case you
need to use them again. If you want to dispose of the packaging, please do so
responsibly.
If you find any damage or any material is missing when you unpack the kit, please
contact your distributor for assistance. Any damage or breakage caused during
transport must be notified within three days of receipt.
The SHX Bubbles device can only be used where there is a power socket.
1.2_Specifications of the SHX Bubbles
Adapter 240V (AC) 50Hz to 3V (DC)
2_ Instructions for use
The SHX Bubbles is ready for use so you just have to connect the adapter and then
the adapter to the socket plus+ so it can be used with the SHX system.

BJ_EX46 SHX Bubbles
Page 3
Instructions manual
BJ-EX46 SHX Soap Bubble Machine
The Enabler Socket+ used for the SHX Bubbles should have the blue selector in
position 2and the yellow selector in position from 1 to F (Timed), depending on the
time the device should be on.
Function
selector
position
Operating mode
0
Latched
1
Timed 1s
2
Timed 2s
3
Timed 3s
4
Timed 5s
5
Timed 10s
6
Timed 15s
The configuration of the Enabler Socket+ is preset in the SHX control software:
Act code 30
On code 76
Off code 60
3_Positioning
We recommend placing the Soap Bubble
machine close to the ceiling on a shelf, so
that it is possible to see the effect of the
soap bubbles falling down. If there’s a SHX
fan in the room, the SHX fan can increase
the effect of the soap bubbles by blowing
them in different directions.
7
Timed 30s
8
Timed 45s
9
Timed 60s
A
Timed 1min 30s
B
Timed 2min
C
Timed 2min 30s
D
Timed 3min
E
Timed 4min
F
Timed 5min

BJ_EX46 SHX Bubbles
Page 4
Instructions manual
BJ-EX46 SHX Soap Bubble Machine
4_Cleaning and Maintenance
Clean the SHX Bubbles regularly to ensure good hygiene. It must be disconnected
from the power supply before cleaning. Clean using soapy water and a soft cloth
(wrung out). Never use chemical or abrasive products for cleaning. Thoroughly dry and
wait one hour to connect to the power supply
5_Regular Inspections
The product should always be used under adult supervision.
A periodic inspection of the devices is recommended; if any faults are detected contact
your distributor for assistance.
6_Safety Guidelines
Correct and supervised use of this equipment will ensure it can be used for a long time.
The SHX Bubbles is designed to create a sensitive effect, it is not designed for direct
use with users so it should never be shaken, overturned or hit with hard objects.
IMPORTANT: Never leave users without adult supervision while using this product.
Suitable for use in therapies with several users simultaneously.