
Assembly Cart & Material Tips
K-5
GRADES
92922INS
Build your cart
Refer to the hand2mind STEM Lab Makerspace Cart assembly
instructions booklet included with your cart.
Place the dividers in the drawers
and hang the buckets
Place the dividers in the drawers
according to the chart on the back
side of this poster and hang the four
buckets on the heavy duty hooks.
Place the labels on the drawers
Getting Started Guide
STEM Lab Makerspace Cart
Step 1
Step 3
Step 4
Thank you for purchasing the hand2mind STEM Lab Makerspace Cart! This short
guide will help you get your new cart ready for student use quickly and easily. The
fi rst section explains how to label drawers, lock the wheels and insert the dividers
once your cart is assembled. The second section walks you through how to load
the cart with all the makerspace materials.
hand2mind STEM
Lab Makerspace Cart
Dimensions: 40(L) X 17(W) X 62inch(H) – 120 LBS
BOX 1: MSCAR3441
42.5(L) X 18.76(W) X 4.75inch(H)
www.gratnellsusa.com
www.gratnellsusa.com
Box
MSCAR3441
Blank labels are
included for easy
customization of
drawer contents.
The color of the gear on
each label corresponds to
the color of the drawer. Affi x
each label to the fl at center
panel of each drawer.
Lock the wheels
Lock both front wheels so that
the cart doesn’t accidentally roll
while fi lling.
Step 2
To lock, push
the lever
down with
your foot
When the
lever is down
the wheel is
in the locked
position
Colored paper, craft foam,
felt, tissue paper
Building blocks
Cardboard, Wikki Stix®
Craft items
Clothespins, skill sticks,
spools, stir sticks
Aluminum foil, cups,
plastic wrap
Pipe cleaners, sponges
Balls, marbles
Assorted craft sticks
Balloons, corks,
craft & sewing items
Clay, compact disks,
fi lters, plates
Gears, magnets, wheels
Dowels, toothpicks,
washers
Electrical items
Cardboard tubes
• The top portion of the cart can be used as
a white board and/or a magnetic board.
• The single and double hooks can
be placed in a variety of places of
your choice.
• The 4 colored hook magnets can be used
at your discretion to hang materials of
your choice.
• The copper tape is conductive and can
be used for electrical activities.
• The coffee stirrers can be used as wheel
axles for some of the wheels.
92922INS_MC-Insert-GK-5.indd 1 12/13/19 4:45 PM