Black Box IC408A-R2 User manual

Place the Local Extender where desired and connect
the CAT5e/6/7 patch cable from the Link port (RJ-45)
to a network switch or wall network port connected
to a switch.
Maximum 330 ft. (100 m)
between devices
Place the Remote Extender where desired. Connect
the CAT5e/6/7 patch cable from the Link port (RJ-45)
to a network switch or wall network port connected
to a switch and connect the Remote Extender
to a power source.
Maximum 330 ft. (100 m)
between network devices
Order toll-free in the U.S. or for FREE 24/7 technical support: Call 877-877-BBOX
(outside U.S. call 724-746-5500)
www.blackbox.com • [e-mail]
Contact
Information
February 2010
MT1000A-85-R4
4-Port USB 2.0 Extender over LAN Quick Start Guide
IC408A-R2
1
1
3
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
Network Connect
Connect the Local Extender to the computer using
the included USB cable.
Computer
Attach the USB device(s) to the Remote Extender.
2
4

FREE, live, 24/7 Tech Support is just 60 seconds away.
877-877-2269 | blackbox.com
© Copyright 2016. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box®and the Double Diamond logo are registered trademarks of BB Technologies, Inc. Any third-party
trademarks appearing in this manual are acknowledged to be the property of their respective owners.
IC408A-R2 Quick Start Guide, version 2
Place the extenders where desired and connect the
CAT5e/6/7 extension link cabling to the Link ports (RJ-45)
on the Local and Remote Extenders.
Maximum 330 ft. (100 m)
between network devices
Connect the Remote Extender to the AC adapter and a
power source.
1
3
Direct Connect
Connect the Local Extender to the computer using
the included USB cable.
Computer
Attach the USB device(s) to the Remote Extender.
2
4
FCC Radio Frequency Interference Statement Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
CE Statement: Black Box declares under our sole responsibility that this product, to which this declaration relates, is in conformity with European Standard EN 55022, EN 61000
and EN 55024.
IC Statement: This Class B digital apparatus complies with Canadian ICES-003.
WEEE Statement: The European Union has established regulations for the collection and recycling of all waste electrical and electronic equipment (WEEE). Implementation
of WEEE regulations may vary slightly by individual EU member states. Please check with your local and state government guidelines for safe disposal and recycling
or contact your national WEEE recycling agency for more information.
Product Operation and Storage: Please read and follow all instructions provided with this product, and operate for intended use only. Do not attempt to open the product casing
as this may cause damage and will void warranty. Use only the power supply provided with this product. When not in use, product should be stored in a dry location
between -20°C and 70°C.
The full user manual/installation guide can be downloaded from the Black Box Web site. Go to www.blackbox.com, enter the part number (IC408A-R2)
in the search box, click on the product in the “Product Results” page, then click on the “Support” tab on the product page, and select the document you wish to download.