Black Box LGC215A-R2 User manual

USER MANUAL
24/7 TECHNICAL SUPPORT AT 1.877.877.2269 OR VISIT BLACKBOX.COM
LGC215A-R2
Media Converter
10G Base-T to 10G Base-R
10/100/1000Base-T to 1000Base-X
POE+ Gigabit Ethernet Converter SFP
UTP
RX
ACT
Link
10G
SD
PWR
Link
ACT
10/100/1000BT
TO 1000BX
POE+ GB MEDIA
CONVERTER

2
TABLE OF CONTENTS
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
1. SPECIFICATIONS................................................................................................................................................................................................. 3
2. OVERVIEW ............................................................................................................................................................................................................ 4
2.1 Introduction.......................................................................................................................................................................................................... 4
2.2 What’s Included................................................................................................................................................................................................... 4
2.3 Hardware Description......................................................................................................................................................................................... 4
3. LINK-FAULT PASSTHROUGH (LFP).................................................................................................................................................................. 6
4. INSTALLING THE CONVERTER......................................................................................................................................................................... 7
5. POE FUNCTION.................................................................................................................................................................................................... 8
APPENDIX A: TWISTED-PAIR AND FIBER CABLES ........................................................................................................................................... 9
A.1 RJ-45 Cable Pin Assignment ............................................................................................................................................................................. 9
A.2 Fiber Optic Cable .............................................................................................................................................................................................. 10
APPENDIX B: REGULATORY INFORMATION......................................................................................................................................................11
B.1 FCC Statement ...................................................................................................................................................................................................11
B.2 NOM Statement ................................................................................................................................................................................................ 12
APPENDIX C: DISCLAIMER/TRADEMARKS ..................................................................................................................................................... 13
C.1 Disclaimer .......................................................................................................................................................................................................... 13
C.2 Trademarks Used in this Manual..................................................................................................................................................................... 13

3
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
TABLE 1-1. SPECIFICATIONS
SPECIFICATION DESCRIPTION
Approvals FCC Class B, CE, RoHS
Description Pure Networking Copper to Fiber Media Converter - 10/100/1000BASE-TX to 1000BASE-X SFP PoE+
Connectors (1) RJ-45, (1) SFP cage
Media Supported
UTP: CAT5/5e/6;
Fiber: Multimode (MM): 50/125 µm or 62.5/125 µm;
Fiber Single-mode (SM): 9/125 µm
Distance CATx: 328 ft. (100 m)
Forwarding Rate 10 Mbps: 14,880 pps, 100 Mbps: 148,800 pps, 1000 Mbps: 1,480,000 pps
Frame Sizes Up to 9216 bytes
Power
Media converter: 48 VDC, 72 W, barrel connector;
External power adapter included: In-line type, 100-240 VAC, 50/60 Hz, 48 VDC, 1.5 A, IEC320 C13/
C14, with US power cord
Standards
IEEE 802.3, IEEE 802.3U, 10/100BASE-TX, 100BASE-FX, IEEE 802.3x flow control for full-duplex mode,
802.3ab 1000BASE-T, 802.3z 1000BASE-X, 802.3at PoE+ (25W)
Dimensions 1” H x 3.7” W x 2.7” D (2.5 x 9.4 x 6.9 cm)
Weight 0.7 lb. (0.3 kg)
Temperature
Operating: 32 to 122° F (0 to 50° C);
Storage: -4 to +158° F (-20 to +70° C)
Mounting Standalone
CHAPTER 1: SPECIFICATIONS

4
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
CHAPTER 2: OVERVIEW
2.1 INTRODUCTION
The 10/100/1000BASE ‐T to 1000BASE-X-PoE+ Gigabit Ethernet Converter SFP supports Gigabit copper and fiber media for network
connection. This converter can be used as a standalone unit.
2.2 WHAT’S INCLUDED
Before you start installing the Converter, verify that the package contains the following:
10/100/1000BASE ‐T to 1000BASE-X-PoE+ Gigabit Ethernet Converter SFP
48-VDC power adapter
Power cord
If anything is missing or damaged, contact Black Box Technical Support at 877-877-2269 or [e-mail]
2.3 HARDWARE DESCRIPTION
Figures 2-1 and 2-2 show the front and back panels of the converter. Table 2-1 describes its components.
1 2 3
FIGURE 2-1. FRONT PANEL
4 5
FIGURE 2-2. BACK PANEL

5
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
CHAPTER 2: OVERVIEW
TABLE 2-1. MEDIA CONVERTER COMPONENTS
NUMBER IN FIGURE 2-1 OR 2-2 COMPONENT DESCRIPTION
1 SFP cage SFP module installs here
2 LED indicators See Table 2-2
3 RJ-45 connector Links to RJ-45 cable
4 Barrel connector for power Links to 47–57-VDC power supply
5 4-position DIP switch Set for LFP or 10M operation
TABLE 2-2. LED INDICATORS
LED NAME STATUS DESCRIPTION
PWR ON Power is ON and normal
FX Link/ACT
ON Connection Status display for fiber link. ON indicates that the fiber link is correctly connected
Blinking Packet is being transmitted through the FX end
OFF Port link is down
SD
ON Fiber signal is detected
OFF No fiber signal detected
1000M
ON Link is operating at 1000 Mbps
OFF Link is operating at 10/100 Mbps
TX Link/Act
ON Connection status display for copper link. ON indicates that the link is correctly connected
Blinking Active status display of copper link. Packet is being transmitted through the TX end
OFF Port link is down
PoE
ON Port is provided 52-VDC power toa remote powered device (PD)
OFF Port is not providing 52-VDC power to a remote powered device (PD)
TABLE 2-3. DIP SWITCHES
DIP SWITCH NAME NUMBER (S) STATUS DESCRIPTION
LFP
1, 2 Both ON Turn ON the Link Fault Passthrough (LFP) detection
1, 2 Both OFF Turn OFF the Link Fault Passthrough (LFP) detection
10M
3, 4 Both ON Twisted-pair link is operating at 10 Mbps
3, 4 Both OFF Twisted-pair link is operating at 100/1000 Mbps

6
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
CHAPTER 3: LINK FAULT PASSTHROUGH (LFP)
The Link Fault Pass-Through (LFPT) is a troubleshooting feature that combines TX and FX LinkLoss from both the local and remote
media converters, TX-FX/SFP modules. LFPT is enabled by turning on the DIP switch on both modules. This feature allows either
end of the conversion to detect a link fault occurring at the other end of the media conversion chain.
Management
Station
Switch/Hub
w/SNMP
Media
Management
Switch/Hub
Converter
Media
Converter
LFP ON LFP ON
Fiber CableTP TP
1 2 3
FIGURE 3-1. LFP FUNCTION
Regardless if there is a break in segment 1, 2 or 3, the link will drop on the switches at both ends. The link fault is passed through
the media conversion and is observed at each end. It acts just like it would if the devices were directly connected.

7
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
CHAPTER 4: INSTALLING THE CONVERTER
Follow these steps to install the PoE+ Media converter:
1. Turn off the power of the device/station in a network to which the Switch will be attached.
2. Ensure that there is no activity in the network.
3. Install the SFP module.
TABLE 4-1. COMPATIBLE SFPS
PART NUMBER DESCRIPTION
LFP411 SFP - 1250-Mbps, Extended Diagnostics, 850-nm Multimode Fiber, 550-m, LC
LFP412 SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Multimode Fiber, 2-km, LC
LFP413 SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Single-Mode Fiber, 10-km, LC
LFP414 SFP - 1250-Mbps, Extended Diagnostics, 1310-nm Single-Mode Fiber, 30-km, LC
LFP418 SFP - 1250-Mbps, Extended Diagnostics, 1550-nm Single-Mode Fiber, 80-km, LC
LFP420, LFP421
SFP - 1250-Mbps, Extended Diagnostics, 1550-nm TX, 1310-nm RX, Simplex, Single-Mode Fiber, 10-km, LC;
SFP - 1250-Mbps, Extended Diagnostics, 1310-nm TX, 1550-nm RX, Simplex Single-Mode Fiber, 10-km, LC
LFP416 SFP - 1250-Mbps, Extended Diagnostics, 10/100/1000BASE-T, SGMII Interface, RJ-45
NOTE: LFP420, LFP421 are single-strand fiber SFPs, so they must be used in pairs.
NOTE: Use the LFP416 for a copper interface.
NOTE: Only the built-in copper interface will do PoE.
4. Attach a fiber cable from the Switch to the fiber network.
5. Attach a CAT5/5e/6 UTP cable from the 10/100/1000BASE-T network to the RJ-45 port on the switch.
6. Connect the 48-VDC power adapter to the switch and verify that the Power LED lights up.
7. Turn on the power of the device/station, the TX Link and FX Link LEDs should light when all cables are attached.

8
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
CHAPTER 5: POE FUNCTION
Before your installation, we recommended that you check your network environment. If there is an IEEE 802.3at/802.3af device you
need to power on, the switch can provide a way to supply power for this Ethernet device conveniently and easily. The Switch equips
an AC-DC adapter with 52-VDC input and it injects the DC power into the pin of the twisted pair cable (Pin 1, 2, 3 and 6).
550m~120km 100 meters
LGC215A-R2
PoE+ camera
Switch
Data Data + Power
Fiber optic cable Twisted-pair cable
FIGURE 5-1. POE INSTALLATION

9
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
APPENDIX A: TWISTED-PAIR AND FIBER CABLES
A.1 RJ-45 CABLE PIN ASSIGNMENT
There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following diagrams show the pin allocation and
color of straight cable and crossover cable connections.
1
234568
7
1 2 3 6
FIGURE A-1. RJ-45 CONNECTOR PINNING
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8
FIGURE A-1. STRAIGHT-THROUGH AND CROSSOVER CABLE PINNING
NOTE: Make sure your connected cables have the correct pin assignment and color as above picture before deploying the cables
into your network.
SIDE 1 SIDE 2
1 - White/Orange 1 - White/Orange
2 - Orange 2 - Orange
3 - White/Green 3 - White/Green
4 - Blue 4 - Blue
5 - White/Blue 5 - White/Blue
6 - Green 6 - Green
7 - White/Brown 7 - White/Brown
8 - Brown 8 - Brown
SIDE 1 SIDE 2
1 - White/Orange 1 - White/Green
2 - Orange 2 - Green
3 - White/Green 3 - White/Orange
4 - Blue 4 - Blue
5 - White/Blue 5 - White/Blue
6 - Green 6 - Orange
7 - White/Brown 7 - White/Brown
8 - Brown 8 - Brown
STRAIGHT- THROUGH CABLE PINNING
CROSSOVER CABLE PINNING

10
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
1. 8 7 7. 8 7 7. 2 2 6 9 BLACKBOX.COM
APPENDIX A: TWISTED-PAIR AND FIBER CABLES
A.2 FIBER OPTIC CABLE
TABLE A-1. FIBER OPTIC PATCH CABLE
STANDARD FIBER TYPE CABLE SPECIFICATION
1000BASE-SX (850 nm) Multimode 50/125 µm or 62.5/125 µm
1000BASE-LX (1300 nm)
Multimode 50/125 µm or 62.5/125 µm
Single-mode 9/125 µm