Black Box JPM083A-R3 User manual

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax [phone]
© Copyright 2004. Black Box Corporation. All rights reserved.

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [email protected]
CUSTOMER
SUPPORT
INFORMATION
FEBRUARY 2004
JPM083A-R3
JPM085A-R3
Wallmount CAT5e Universal Patch Panel
(12- or 24-Port)

TRADEMARKS USED IN THIS MANUAL
1
TRADEMARKS USED IN THIS MANUAL
UL is a registered trademark of Underwriters Laboratories Incorporated.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

WALLMOUNT CAT5E UNIVERSAL PATCH PANEL (12- OR 24-PORT)
2
Contents
Chapter Page
1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3
CHAPTER 1: Specifications
1. Specifications
Compliance: UL®listed
Termination Type: Incoming cables terminated to 110 clips
Wiring: T568B or T568A
Bandwidth Support: Up to 100 MHz
Transmission: Exceeds Category 5e requirements for near-end crosstalk (NEXT), attenuation, and return loss
as specified in TSB-40 standard
Connectors: (12) or (24) RJ-45 modular jacks used for patching T568B or T568A wiring pattern (see Figure 1
below); IDC connectors support 22, 24, or 26 AWG solid wire
Figure 1. T568B and T568A wiring patterns.
Indicators: None
Plug Insertion Life (MTBF): 750 cycles minimum
Temperature: Operating: -40 to +150°F (-40 to +68°C)
Size: JPM083A-R3: 4.1"H x 17"W x 3.1"D (10.4 x 43.2 x 7.9 cm);
JPM085A-R3: 8.1"H x 17"W x 3.1"D (20.6 x 43.2 x 7.9 cm)
Weight: JPM083A-R3: 4 lb. (1.8 kg);
JPM085A-R3: 6.8 lb. (3.1 kg)
T568B T568A

WALLMOUNT CAT5E UNIVERSAL PATCH PANEL (12- OR 24-PORT)
4
2. Introduction
2.1 Overview
The Wallmount CAT5e Universal Patch Panels are designed to link ports together in small- to medium-sized
cross-connect applications where space is limited. For example, the patch panel is ideal for cluttered
telecommunication closets where relay racks aren’t practical. Because the panel mounts directly on the wall, no
extra rack equipment is needed. See Figures 2 and 3 for illustrations of the 12- and 24-port models.
The panel supports all applications operating on bandwidths up to 100 MHz, such as 100BASE-TX and Gigabit
Ethernet. The panel exceeds all Category 5e transmission requirements for NEXT, attenuation, and return loss.
2.2 Features
• The panel’s simple one-piece design (plus cover) guarantees a clean installation, even in small closets.
• Removable cover protects terminations.
• Total front access to the 110 clips and modular jacks (separate fields for terminating and cross-connecting)
cuts installation time and labor costs.
• The patch panel is clearly labeled with jack and block identification numbers.
• Fully enclosed PC board reduces radio-frequency interference.
• Built-in cable management, featuring large hooks and rotating cable tie buttons, keeps your cable neat and
organized, and helps technicians comply with Category 5e installation practices.
• 100% computer tested means the panel ensures reliable Category 5e point-to-point continuity.
• Keyhole mounting slots for easier installation.
• Includes cable ties to help support cable management.

5
Figure 2. 12-port model.
Figure 3. 24-port model.
CHAPTER 2: Introduction
Cable tie buttons Large hooks for cable
management
Cable tie buttons
Large hooks for cable
management
Keyhole mounting
slot
Keyhole mounting
slot
Keyhole mounting
slot
Keyhole mounting
slot
Cable tie buttons Large hooks for cable
management
Large hooks for cable
management
1 2 3 4
12 34 56 78 9 10 11 12
5678 9 10 11 12
1 2 3 4 5678 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
12 34 56 78 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
Cable tie buttons
RJ-45 ports, labeled 1–12, are in the top
row of this diagram. Color-coded
sticker positions shown in Figure 4,
labeled 1–12, are in the middle and
bottom rows of this diagram.
RJ-45 ports, labeled 1–24, are in the top
and bottom rows of this diagram.
Color-coded sticker positions shown in
Figure 5, labeled 1–24, are in the four
middle rows of this diagram.

WALLMOUNT CAT5E UNIVERSAL PATCH PANEL (12- OR 24-PORT)
6
3. Installation
1. Make sure that the Wallmount CAT5e Universal Patch Panel is firmly secured to the wall.
2. Remove the IDC cover by sliding it to the right and then lifting it from the surface.
3. To prepare the cable, strip about 2 inches (5.1 cm) of cable jacket. Be careful not to damage the twisted
wire.
4. Place each wire in the appropriate position based on wiring color and label. See Figures 4 and 5.
NOTE
For best performance, keep the untwisted part of the cable less than 0.5 inches
(1.3 cm) long.
Figure 4. 12-port patch panel’s T568B and T568A wiring labels.
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)

7
Figure 5. 24-port patch panel’s T568B and T568A wiring labels.
CHAPTER 3: Installation
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)
T568B (top row)
T568A (bottom row)

WALLMOUNT CAT5E UNIVERSAL PATCH PANEL (12- OR 24-PORT)
8
5. Terminate each wire with a 110 punchdown tool. Then push the 110 tool to the edge of the connector in
order to trim the conductors. See Figure 6.
Figure 6. Using the punchdown tool to terminate connectors.
6. When all cables are terminated to the wallmount patch panel, use the large hooks and cable tie buttons
for cable management where necessary.
7. Plug the patch cord into the patch panel to connect to the network equipment.