Black Box RADIAN 1000 Series User manual

STEP X - Name of Step
24/7 TECHNICAL SUPPORT AT 877.877.2269 OR VISIT BL ACKBOX.COM
V W P -10 60
RADIAN
1000 SERIES
QUICK START GUIDE

STEP 1 - Keyboard and Mouse
CONNECT TO USB PORTS
Connect the keyboard and mouse
to USB ports.

STEP 2 - Connect to a Network (Optional)

STEP 3 - Connect to an Input Source
INPUT SOURCE(S)
Because each system is custom built, the
number and type of inputs will differ from
system to system.
INPUT CONNECTORS

STEP 4 - Control Screen (Optional) and Monitors
CONNECT
Many of our wall controllers are configured
to use a control screen (Internal Graphics
Device) before leaving the factory. If required,
connect the control screen to the motherboard
as shown. If a control screen is not required,
you will need to change the BIOS settings.
4 X 2 VIDEO WALL
13 4
5678
2
MONITOR 1
MONITOR 2
MONITOR 3
MONITOR 4
MONITOR 5
MONITOR 6
MONITOR 7
MONITOR 8
CONNECT GRAPHICS OUTPUTS TO
MONITORS USING DISPLAYPORT CABLES
(NOT SUPPLIED)
CONTROL SCREEN
(OPTIONAL)

STEP 5 - Powering On the System
POWER SWITCH
POWER
1. Connect the power cable, then plug into
and turn on the power supply.
2. Switch on the system.

STEP 6 - Windows 7 Setup
THE PRODUCT KEY
IS LOCATED BEHIND
THE FRONT PANEL.
GENTLY PULL AWAY
THE FRONT PANEL
FOR ACCESS.
FOLLOW THESE STEPS
1. Open the Windows Setup window.
2. Type in the Product Key.
NOTE: The Product Key is located behind the
front panel. Gently pull away the front panel
for access.
3. Check “Use recommended settings.” Use
only Internet-standard characters in the
computer name (numbers 0 through 9, upper-
and lower-case letters from A through Z and
the hyphen character). Computer names
cannot consist entirely of numbers, contain
spaces, or use special characters such as < >
; : “ ?* + = \ | ?

STEP 7 - Activate Windows 7
Start | Computer | Properties | Activate Windows now.
ACTIVATE WINDOWS 7
1. Select the appropriate method available.
2. To view the product key, gently pull away
the front panel of the 6-Slot Chassis. The front
panel is held in place with a series of magnetic
points.

STEP 8 - Display Setup
Start | Control Panel | Appearance and Personalization | Adjust screen resolution.
1
2
3
LAYOUT AND RESOLUTION SETTINGS
All Radian wall controllers have pre-configured
settings for the wall layout and screen
resolution. Change settings using the TWIN
tab.

STEP 9 - Radian Video Wall Manager (Optional)
Start | All Programs | Radian Video Wall Manager - Server
Start | All Programs | Radian Video Wall Manager - Client
STARTING VIDEO WALL MANAGER
1. Before opening the Client interface, you
will need to start the Server by clicking on it
in the Programs menu. The Radian Video Wall
Manager Client can only detect servers that
are running.
2. When you open Radian Video Wall Manager
for the first time, you will be prompted to
take a Quick Start Tour of the application. We
strongly recommend that you take the tour
before using the application.