Black Box LBH100A-PD-ST-24 User manual

Tough switches to withstand harsh conditions
at the edge of your network.
Tough switches to withstand harsh conditions
at the edge of your network.
Heavy-Duty Edge Switches
© 2007. All rights reserved. Black Box Corporation.
FREE 24-hour Tech Support: 724-746-5500
blackbox.com

2 of 6
6/10/2007
#26587
724-746-5500 blackbox.com
FEATURES
• Choose from versions for the office,
the factory, even the outdoors.
• Feature six ports to expand your
network.
• Many port types and power options
available.
• Power options for any application.
• Support VLAN tagging and spanning
tree passthrough.
• Include Link-Loss-Learn (LLL) feature
for fast network recovery.
• Tough steel case.
OVERVIEW
The Ethernet switches in your wiring closet or computer
center enjoy a protected environment. The Ethernet switches
at the edges of your network have to put up with the bumps,
the dirt, the dampness, and the temperature fluctuations that
happen out in the real world. This is where Heavy-Duty Edge
Switches from Black Box come in.
Heavy-Duty Edge Switches are tough, 6-port Ethernet
switches that enable you to expand your network into harsh
environments such as factory floors or the outdoors. They’re
robust, easy to set up, and available with a vast array of
interface, power, and durability options. In short, they’re
everything you’re looking for in an edge switch.
Built tough
All Heavy-Duty Edge Switches come in a sturdy steel case
that withstands heavy use.
The switches come in three versions to adapt to nearly
any environment. Because all three types work together
seamlessly, you can use inexpensive Standard Heavy-Duty
Edge Switches in protected office environments and choose
the more robust Hardened or Extreme Heavy-Duty Edge
Switches for harsh locations at your network’s edge.
Standard Edge Switches
• For use in clean, temperature-controlled environments
such as offices and wiring closets.
• Feature the same heavyweight metal case as our more
robust models.
Hardened Edge Switches
• For use in dusty or dirty environments—ideal for
demanding industrial applications.
• Rated for a temperature range between -13 and +140°F
(-25 and +60°C).
• The metal case acts as a heat sink so no internal airflow
is needed for cooling.
• Sealed case resists contaminants such as dust, dirt, moisture,
smoke, and insects.
Extreme Edge Switches
• Robust units for outdoor use require protection only from
direct rainfall or standing water.
• Ideal for applications such as traffic-signal control, or for
sensors or surveillance cameras in outdoor plants.
• Rated for above-the-ceiling plenum installation.
• Rated for extreme temperature ranges of -40 to +167°F
(-40 to +75°C).
• Features a sealed case, which uses its own metal shell as a
heat sink.
Multiple power options
• Standard models come with AC power adapters only,
in a choice of 115 or 240 VAC.
• AC-powered Hardened and Extreme Switches feature
robust 100- to 240-VAC power supplies.
• DC-powered Hardened and Extreme units have internal
screw terminals for connecting DC power in addition to
an AC power jack. Because these models have dual power
connections, you can use them simultaneously with both
your DC power supply and an AC power adapter (sold
separately) to provide redundant power input.
21,620
FinancialReport
June July
14,000
15,000
16,000
17,000
18,000
19,000
20,000
21,000
Standard Heavy-Duty Edge
Switch (LBH240A-ST)
CAT5e 100-MHz
Patch Cable
(EVNSL25E)
PC
PLCPLC
Server IP Security
Camera
IP Security
Camera
Extreme Heavy-Duty Edge
Switch (LBH240A-P-ST) Hardened Heavy-Duty Edge
Switch (LBH240A-H-ST) Standard Heavy-Duty Edge
Switch (LBH150A-ST)
Multimode Fiber Optic Cable
(EFN110) Multimode Fiber Optic Cable (EFN110) Multimode Fiber Optic Cable (EFN110)
Daisychain switches for easy network extension.

3 of 6
6/10/2007
#26587
724-746-5500 blackbox.com
TECH SPECS
Altitude — -200 to 50,000 ft. (-61 to 15,240 m)
Distance (Maximum) — Multimode models: 2 km (1.2 mi.);
Single-mode SC models: 20 km (12.4 mi.);
Single-mode LC models: 15 km (9.3 mi.);
Single-mode, long-distance SC models: 40 km (24.8 mi.)
Enclosure — Steel
Humidity — 5–95%, noncondensing
Standards — IEEE 802.3, IEEE 802.3u, IEEE 802.1p/q
Temperature Rating —
All models:
Storage: -40 to +185°F (-40 to +85°C);
Standard models:
Operating: +32 to +104°F (0 to +40°C);
Hardened models:
Long-term operating:
-13 to +140°F (-25 to +60°C);
Short-term operating:
-40 to +185°F (-40 to +85°C);
Cold start to -4°F (-20°C);
Extreme models:
Long-term operating:
-40 to +167°F (-40 to +75°C);
Short-term operating:
-58 to +212°F (-50 to +100°C);
Cold start to -40°F (-40°C)
Indicators — LEDs:
Per Unit: (2) Power;
Per Port: (2) LK/ACT, 2) F/H;
Per Copper Port: (2) 10/100
Size — 3.6"H x 3"W x 1.7"D (9.1 x 7.6 x 4.3 cm)
Weight — Switches: 0.8 lb. (0.4 kg);
Standard and Hardened Power Supplies: 0.4 lb. (0.2 kg);
Extreme Power Supplies: 0.5 lb. (0.2 kg)
Run the distance!
Choose switches with fiber links for long-distance fiber
links through harsh environments.
Multimode models support up to 2 kilometers (1.2 miles)
between switches. For longer distances, choose single-mode
models for up to 20 kilometers (12.4 miles) or single-mode,
long-distance models for an incredible 40 kilometers
(24.8 miles) between links.
Heavy-Duty Edge Switches can be daisychained together
indefinitely, making them ideal for applications such as
traffic signals where a great many switches are needed
over a long distance.
Easy to set up
Heavy-Duty Edge Switches are literally plug-and-play.
All copper ports are autosensing for speed and duplex,
adjusting to the connected device automatically. Plus, the
UTP ports feature Auto-MDI/MDI-X, eliminating the need
for crossover cables.
Each switch has two full sets of LED indicators: one set
on the front for viewing convenience when the switch is
DIN rail or wallmounted, and one set mounted in the end
next to the media ports for easy viewing when units are in
a rackmount tray.
Heavy-Duty Edge Switches feature nonblocking switching
architecture with a 2K MAC address table. The 128K
buffer memory makes it easy to interconnect 10-Mbps
and 100-Mbps devices.
Fast, redundant backup
Heavy-Duty Edge Switches feature Link-Loss-Learn (LLL)
for fast network recovery when using the switches in a
redundant application. In a normal network situation where
you have primary link and a backup link, the network can
take up to a few minutes to recover after the primary link
goes down. This is because, when the link breaks, the switch
uses its old MAC address table to try to send data to the
disabled port.
However, if a link breaks with LLL in place, the switch
senses the disconnect and instantly clears its MAC address
table, forcing a new address table that includes the new link.
LLL works on both copper and fiber ports and be enabled
or disabled at will.
LBH150A-P-SC
Use them nearly anywhere
Heavy-Duty Edge Switches can be used as standalone
switches, wallmounted, or DIN-rail mounted with special
brackets. You an also rackmount up to eight units in the
optional Rackmount Tray.
The switches each have two full sets of LED indicators:
one set on the front for viewing and one set mounted next to
the media ports, so you get a clear view of the LEDs from any
angle.
Don’t see it? Just ask.
If you require a port combination, power source, or
mounting option not listed, contact our FREE Tech Support.

4 of 6
6/10/2007
#26587
724-746-5500 blackbox.com
Item Code
Heavy-Duty Edge Switches, Standard
(6) 10-/100-Mbps Copper
115-VAC LBH600A
240-VAC LBH600AE
(5) 10-/100-Mbps Copper and (1) 100-Mbps Multimode Fiber
115-VAC, SC LBH150A-SC
240-VAC, SC LBH150AE-SC
115-VAC, ST®LBH150A-ST
240-VAC, ST LBH150AE-ST
115-VAC, MT-RJ LBH150A-MT
240-VAC, MT-RJ LBH150AE-MT
(5) 10-/100-Mbps Copper and (1) 100-Mbps Single-Mode Fiber
115-VAC, SC LBH150A-SSC
240-VAC, SC LBH150AE-SSC
115-VAC, Long-Distance, SC LBH150A-SSCL
240-VAC, Long-Distance, SC LBH150AE-SSCL
115-VAC, LC LBH150A-SLC
240-VAC, LC LBH150AE-SLC
(4) 10-/100-Mbps Copper and (2) 100-Mbps Multimode Fiber
115-VAC, SC LBH240A-SC
240-VAC, SC LBH240AE-SC
115-VAC, ST LBH240A-ST
240-VAC, ST LBH240AE-ST
115-VAC, MT-RJ LBH240A-MT
240-VAC, MT-RJ LBH240AE-MT
(4) 10-/100-Mbps Copper and (2) 100-Mbps Single-Mode Fiber
115-VAC, SC LBH240A-SSC
240-VAC, SC LBH240AE-SSC
115-VAC, Long-Distance, SC LBH240A-SSCL
240-VAC, Long-Distance, SC LBH24AE-SSCL
115-VAC, LC LBH240A-SLC
240-VAC, LC LBH240AE-SLC
Heavy-Duty Edge Switches, Hardened
(6) 10-/100-Mbps Copper
100–240-VAC LBH600A-H
100–240-VAC w/IEC connector LBH600AE-H
12-VDC LBH600A-H-12
24-VDC LBH600A-H-24
24-VDC, DIN Rail Mountable LBH600A-HD-24
48-VDC LBH600A-H-48
Item Code
Heavy-Duty Edge Switches, Hardened (Continued)
(5) 10-/100-Mbps Copper and (1) 100-Mbps Multimode Fiber
100–240-VAC, SC LBH150A-H-SC
100–240-VAC, ST LBH150A-H-ST
100–240-VAC, MT-RJ LBH150A-H-MT
100–240-VAC with IEC, SC LBH150AE-H-SC
100–240-VAC with IEC, ST LBH150AE-H-ST
100–240-VAC with IEC, MT-RJ LBH150AE-H-MT
12-VDC, SC LBH150A-H-SC-12
12-VDC, ST LBH150A-H-ST-12
12-VDC, MT-RJ LBH150A-H-MT-12
24-VDC, SC LBH150A-H-SC-24
24-VDC, SC,
DIN Rail Mountable LBH150A-HD-SC-24
24-VDC, ST LBH150A-H-ST-24
24-VDC, ST,
DIN Rail Mountable LBH150A-HD-ST-24
24-VDC, MT-RJ LBH150A-H-MT-24
24-VDC, MT-RJ,
DIN Rail Mountable LBH150A-HD-MT-24
48-VDC, SC LBH150A-HP-SC-48
48-VDC, ST LBH150A-H-ST-48
48-VDC, MT-RJ LBH150A-H-MT-48
(5) 10-/100-Mbps Copper and (1) 100-Mbps Single-Mode Fiber
100–240-VAC, SC LBH150A-H-SSC
100–240-VAC, LC LBH150A-H-SLC
100–240-VAC with IEC, SC LBH150AE-H-SSC
100–240-VAC with IEC, LC LBH150AE-H-SLC
100–240-VAC, Long-Distance, SC LBH150A-H-SSCL
100–240-VAC with IEC,
Long-Distance, SC LBH150AE-H-SSCL
12-VDC, SC LBH150A-H-SSC-12
12-VDC, LC LBH150A-H-SLC-12
12-VDC, Long-Distance, SC LBH150A-H-SSCL-12
24-VDC, SC LBH150A-H-SSC-24
24-VDC, LC LBH150A-H-SLC-24
24-VDC,
DIN Rail Mountable, SC LBH150A-HD-SSC-24
24-VDC
DIN Rail Mountable, LC LBH150A-HD-SLC-24
24-VDC, Long-Distance, SC LBH150A-H-SSCL-24
24-VDC, Long-Distance
DIN Rail Mountable, SC LBH150A-HD-SSCL-24
48-VDC, SC LBH150A-H-SSC-48
48-VDC, LC LBH150A-H-SLC-48
48-VDC, Long-Distance, SC LBH150A-H-SSCL-48
LBH600A

5 of 6
6/10/2007
#26587
724-746-5500 blackbox.com
Item Code
Heavy-Duty Edge Switches, Hardened (Continued)
(4) 10-/100-Mbps Copper and (2) 100-Mbps Multimode Fiber
100–240-VAC, SC LBH240A-H-SC
100–240-VAC, ST LBH240A-H-ST
100–240-VAC, MT-RJ LBH240A-H-MT
100–240-VAC with IEC, SC LBH240AE-H-SC
100–240-VAC with IEC, ST LBH240AE-H-ST
100–240-VAC with IEC, MT-RJ LBH240AE-H-MT
12-VDC, SC LBH240A-H-SC-12
12-VDC, ST LBH240A-H-ST-12
12-VDC, MT-RJ LBH240A-H-MT-12
24-VDC, SC LBH240A-H-SC-24
24-VDC, ST LBH240A-H-ST-24
24-VDC, MT-RJ LBH240A-H-MT-24
24-VDC,
DIN Rail Mountable, SC LBH240A-HD-SC-24
24-VDC,
DIN Rail Mountable, ST LBH240A-HD-ST-24
24-VDC,
DIN Rail Mountable, MT-RJ LBH240A-HD-MT-24
48-VDC, SC LBH240A-H-SC-48
48-VDC, ST LBH240A-H-ST-48
48-VDC, MT-RJ LBH240A-H-MT-48
(4) 10-/100-Mbps Copper and (2) 100-Mbps Single-Mode Fiber
100–240-VAC, SC LBH240A-H-SSC
100–240-VAC, LC LBH240A-H-SLC
100–240-VAC with IEC, SC LBH240AE-H-SSC
100–240-VAC with IEC, LC LBH240AE-H-SLC
100–240-VAC,
Long-Distance, SC LBH240A-H-SSCL
100–240-VAC with IEC,
Long-Distance, SC LBH240AE-H-SSCL
12-VDC, SC LBH240A-H-SSC-12
12-VDC, LC LBH240A-H-SLC-12
12-VDC, Long-Distance, SC LBH240A-H-SSCL-12
24-VDC, SC LBH240A-H-SSC-24
24-VDC, LC LBH240A-H-SLC-24
24-VDC,
DIN Rail Mountable, SC LBH240A-HD-SSC-24
24-VDC,
DIN Rail Mountable, LC LBH240A-HD-SLC-24
24-VDC, Long-Distance, SC LBH240A-H-SSCL-24
24-VDC, Long-Distance,
DIN Rail Mountable, SC LBH240A-HD-SSCL-24
48-VDC, SC LBH240A-H-SSC-48
48-VDC, LC LBH240A-H-SLC-48
48-VDC, Long-Distance, SC LBH240A-H-SSCL-48
Heavy-Duty Edge Switches, Extreme
(6) 10-/100-Mbps Copper
100–240-VAC LBH600A-P
100–240-VAC w/IEC connector LBH600AE-P
12-VDC LBH600A-P-12
24-VDC LBH600A-P-24
24-VDC, DIN Rail Mountable LBH600A-PD-24
48-VDC LBH600A-P-48
Item Code
Heavy-Duty Edge Switches, Extreme (Continued)
(5) 10-/100-Mbps Copper and (1) 100-Mbps Multimode Fiber
100–240-VAC, SC LBH150A-P-SC
100–240-VAC, ST LBH150A-P-ST
100–240-VAC, MT-RJ LBH150A-P-MT
100–240-VAC with IEC, SC LBH150AE-P-SC
100–240-VAC with IEC, ST LBH150AE-P-ST
100–240-VAC with IEC, MT-RJ LBH150AE-P-MT
12-VDC, SC LBH150A-P-SC-12
12-VDC, ST LBH150A-P-ST-12
12-VDC, MT-RJ LBH150A-P-MT-12
24-VDC, SC LBH150A-P-SC-24
24-VDC, ST LBH150A-P-ST-24
24-VDC, MT-RJ LBH150A-P-MT-24
24-VDC
DIN Rail Mountable, SC LBH150A-PD-SC-24
24-VDC
DIN Rail Mountable, ST LBH150A-PD-ST-24
24-VDC,
DIN Rail Mountable, MT-RJ LBH150A-PD-MT-24
48-VDC, SC LBH150A-P-SC-48
48-VDC, ST LBH150A-P-ST-48
48-VDC, MT-RJ LBH150A-P-MT-48
(5) 10-/100-Mbps Copper and (1) 100-Mbps Single-Mode Fiber
100–240-VAC, SC LBH150A-P-SSC
100–240-VAC, LC LBH150A-P-SLC
100–240-VAC with IEC, SC LBH150AE-P-SSC
100–240-VAC with IEC, LC LBH150AE-P-SLC
100–240-VAC, Long-Distance, SC LBH150A-P-SSCL
100–240-VAC with IEC,
Long-Distance, SC LBH150AE-P-SSCL
12-VDC, SC LBH150A-P-SSC-12
12-VDC, LC LBH150A-P-SLC-12
12-VDC, Long-Distance, SC LBH150A-P-SSCL-12
24-VDC, SC LBH150A-P-SSC-24
24-VDC, LC LBH150A-P-SLC-24
24-VDC,
DIN Rail Mountable, SC LBH150A-PD-SSC-24
24-VDC,
DIN Rail Mountable. LC LBH150A-PD-SLC-24
24-VDC, Long-Distance, SC LBH150A-P-SSCL-24
24-VDC, Long-Distance,
DIN Rail Mountable, SC LBH150A-PD-SSCL-24
48-VDC, SC LBH150A-P-SSC-48
48-VDC, LC LBH150A-P-SLC-48
48-VDC, Long-Distance, SC LBH150A-P-SSCL-48
LBH240A-H-SC

6 of 6
6/10/2007
#26587
724-746-5500 blackbox.com
Item Code
Heavy-Duty Edge Switches, Extreme (Continued)
(4) 10-/100-Mbps Copper and (2) 100-Mbps Multimode Fiber
100–240-VAC, SC LBH240A-P-SC
100–240-VAC, ST LBH240A-P-ST
100–240-VAC, MT-RJ LBH240A-P-MT
100–240-VAC with IEC, SC LBH240AE-P-SC
100–240-VAC with IEC, ST LBH240AE-P-ST
100–240-VAC with IEC, MT-RJ LBH240AE-P-MT
12-VDC, SC LBH240A-P-SC-12
12-VDC, ST LBH240A-P-ST-12
12-VDC, MT-RJ LBH240A-P-MT-12
24-VDC, SC LBH240A-P-SC-24
24-VDC, ST LBH240A-P-ST-24
24-VDC, MT-RJ LBH240A-P-MT-24
24-VDC,
DIN Rail Mountable, SC LBH240A-PD-SC-24
24-VDC,
DIN Rail Mountable, ST LBH240A-PD-ST-24
24-VDC,
DIN Rail Mountable, MT-RJ LBH240A-PD-MT-24
48-VDC, SC LBH240A-P-SC-48
48-VDC, ST LBH240A-P-ST-48
48-VDC, MT-RJ LBH240A-P-MT-48
(4) 10-/100-Mbps Copper and (2) 100-Mbps Single-Mode Fiber
100–240-VAC, SC LBH240A-P-SSC
100–240-VAC, LC LBH240A-P-SLC
100–240-VAC with IEC, SC LBH240AE-P-SSC
100–240-VAC with IEC, LC LBH240AE-P-SLC
100–240-VAC,
Long-Distance, SC LBH240A-P-SSCL
100–240-VAC with IEC,
Long-Distance, SC LBH240AE-P-SSCL
12-VDC, SC LBH240A-P-SSC-12
12-VDC, LC LBH240A-P-SLC-12
12-VDC, Long-Distance, SC LBH240A-P-SSCL-12
24-VDC, SC LBH240A-P-SSC-24
24-VDC, LC LBH240A-P-SLC-24
24-VDC,
DIN Rail Mountable, SC LBH240A-PD-SSC-24
24-VDC,
DIN Rail Mountable, LC LBH240A-PD-SLC-24
24-VDC, Long-Distance, SC LBH240A-P-SSCL-24
24-VDC, Long-Distance,
DIN Rail Mountable, SC LBH240A-PD-SSCL-24
48-VDC, SC LBH240A-P-SSC-48
48-VDC, LC LBH240A-P-SLC-48
48-VDC, Long-Distance, SC LBH240A-P-SSCL-48
Item Code
For spare power supplies, order…
AC Power Supplies for Heavy-Duty Edge Switches
Standard
115-VAC LBH100A-115-VAC
240-VAC LBH100AE-240-VAC
Hardened
100–240-VAC LBH100A-H-PS
100–240-VAC with IEC Connector LBH100AE-H-PS
Extreme
100–240-VAC LBH100A-P-PS
100–240-VAC with IEC Connector LBH100AE-P-PS
For rackmounting, order…
Rackmount Tray
with (1) 9-V Power Supply
(Powers up to 3 Switches) LH1505P-RACK-1-9-V
with (2) 9-V Power Supplies
(Powers up to 6 Switches) LH1505P-RACK-2-9-V
with no Power Supply
(Holds up to 8 Switches) LE1505-RACK
To supply redundant power to both the AC power jack and the
DC screw terminal on 24-VDC models only, order…
Dual-Source Cable Kit LH1505-CK
LE1505-RACK shown with
Media Converter Switches