Black Box LPH1006A User manual

877-877-2269 | blackbox.com877-877-2269 | blackbox.com 877-877-2269 | blackbox.com
Page 5 Page 6
© Copyright 2016. Black Box Corporation. All rights reserved.
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc. Any other trademarks mentioned in this manual
are acknowledged to be the property of the trademark owners.
Quick Start Guide
LPH1000 Series Industrial Ethernet PoE Switch
LPH1006A
Order toll-free in the U.S.:
Call 877-877-BBOX
(outside U.S. call 1-724-746-5500)
FREE technical support
24 hours a day, 7 days a week:
Call 877-877-2269
Web site: www.blackbox.com
E-mail: [e-mail]
Customer
Support
Information
LPH1006A Quick Start Guide
lph10 0 6a _qsg _ rev2
Table 2-1. Switch components.
Number in
Figure 2-1
Component Description
1(2) Power
LEDs
Light when unit is
powered on.
2(2) SFP Speed
DIP Switches
Selects 100M/1G.
3(2) SFP Link/
Act LEDs
Light when SFP Link is
active.
4(2) SFP slots SFP module (LFP401–
LFP404, LFP411–
LFP414, LFP416) installs
here
5(4) Gigabit
RJ-45 PoE
ports
Link to 10 /100 /1000-
Mbps PoE Ethernet
devices or segments
6(1) Power
Fault LED
Lights when power is
on.
7(4) RJ-45
port LINK/
ACT LEDs
ON when port is con-
nected;
OFF when port is not
connected;
Flashing when data is
transmitted or received
8(4) RJ-45
port PoE
LEDs
ON when port is using
PoE;
OFF when port is not
using PoE
NOTE: SFP modules are ordered separately.
Table 2-2. Relay output DIP switches (#9 in Figure 2-1).
Code Description
LFP401 SFP, 155-Mbps Fiber with Extended Diagnostics,
850-nm Multimode, LC, 2 km
LFP402 SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Multimode, 2 km, LC
LFP403 SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, Plus, 30 km, LC
LFP404 SFP, 155-Mbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, Plus, 60 km, LC
LFP411 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
850-nm Multimode, LC, 300 m
LFP412 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Multimode, LC, 2 km
LFP413 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, LC, 10 km
LFP414 SFP, 1.25-Gbps Fiber with Extended Diagnostics,
1310-nm Single-Mode, LC, 30 km
LFP416 SFP with SGMII Interface, 1.25 Gbps, Copper,
10/100/1000BASE-T, Extended Diagnostics
Table 2-3. Compatible SFPs.
DIP-1 DIP-2 Description
OFF OFF Power failure relay alarm disabled.
ON OFF PWR-1 failure, relay alarm enabled
OFF ON PWR-2 failure, relay alarm enabled.
ON ON PWR-1 or PWR-2 failure, relay alarm
enabled.

877-877-2269 | blackbox.com877-877-2269 | blackbox.com 877-877-2269 | blackbox.com
LPH1006A Quick Start Guide LPH1006A Quick Start GuideLPH1006A Quick Start Guide
Page 3Page 2 Page 4
1. Specifications
Features
Processing Store-and-Forward
MAC
Addresses
1 K
Mechanical
User Controls (2) DIP switches for SFP speed setting;
(2) DIP switches for Relay output
Indicators Per RJ-45 port: (1) LINK/ACT, (1) PoE;
Per SFP port: (1) LINK/ACT;
Per unit: (2) PWR, (1) Fault LED
Connectors (4) RJ-45, 10/100/1000BASE-T(X)
PSE, auto MDI/MDI-X;
(2) 100M/1G SFP slots
Dimensions 5.6"H x 1.6"W x 3.7"D
(14.3 x 4.1 x 9.4 cm)
Weight 1.2 lb. (0.54 kg)
Power
Redundant Dual 24–36 VDC inputs on 6-pin
terminal block
Consumption 7.5 W, with overload current
protection
Relay 1 A at 24 VDC
Environmental
Temperature
Tolerance
Operating: -40 to +158° F
(-40 to +70° C);
Storage: -40 to +185° F
(-40 to +85° C)
Humidity 10 to 95%, noncondensing
Approvals
Regulations EMI, EMS, Shock, Free Fall, Vibration,
Safety
Approvals
Certifications FCC Class B, CE
Standards IEEE 802.3x Flow control;
IEEE 802.3 10BASE-T;
IEEE 802.3u 100BASE-TX/FX;
IEEE 802.3ab 1000BASE-T;
IEEE 802.3z 1000BASE-X;
IEEE 802.3at POE (up to 30 W per
port for PSE)
2. Overview
2.1 Features
This unmanaged PoE switch provides (4)10/100/1000
Mbps ports plus (2) 100M/1G SFP open slots. It was
designed for easy installation and high performance in
an environment where traffic is on the network and the
number of users increases continuously.
2.2 Features
• Provides (4) 10/100/1000Mbps PoE (PSE) ports
plus (2) 100M/1G SFP slots.
• Supports PSE based on IEEE 802.3t standard
up to 30 W per port.
• Includes dual 24 VDC power inputs.
• SFPs support 100BASE-TX and 1000BASE-X speeds.
• Auto-negotiates speed and polarity.
• Supports store-and-forward transmission.
• Mounts on a DIN rail or wall.
2.3 What’s Included
Your package should include the following items.
If anything is missing or damaged, contact Black Box
Technical Support at 877-877-2269 or
[e-mail].
• (1) Gigabit Ethernet Switch
• This Quick Installation Guide
2.4 Hardware Description
Power Connection Guide
1000BASE-T Ethernet Connection
10/100BASE-T(X) Ethernet Connection
Front and Top Panels
Figures 2-1 shows the front and top panels of the
switch. Table 2-1 describes its components.
Figure 2-1. Front and top panels.
1
2
3
6
4
4
5
7
8
9