Black Box SW214A User manual

3 to 1 HDMI Switch
SW214A
Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX
FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax [phone]
Mail order: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: [email protected]
CUSTOMER
SUPPORT
INFORMATION
UMA1107 Rev.B
3 input x 1 output HDMI Video Switch
Selects and boosts Video Input Channel. Drives
cables to 50 feet

3 to 1 HDMI Switch
1
Trademarks Used in this Manual
BLACK BOX and its logo are registered trademarks of Black Box
Corporation. HDMI is a registered trademark of HDMI Licensing LLC.
Any other trademarks mentioned in this manual are acknowledged to be the
property of the trademark owners.
FCC and Canadian Dept of Communications Radio
Frequency interference statements
This equipment generates, uses, and can radiate radio frequency energy
and if not installed and used properly, that is, in strict accordance with
the manufacturer’s instructions, may cause interference to radio
communication. It has been tested and found to comply with the limits
for a Class A computing device in accordance with the specifications in
Subpart B of Part 15 of FCC rules, which are designed to provide
reasonable protection against such interference when the equipment is
operated in a commercial environment. Operation of this equipment in
a residential area is likely to cause interference, in which case the user
at their ownexpense will be required to take whatever measures may
be necessary to correct the interference. Changes or modifications not
expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This digital apparatus does not exceed the Class A limits for radio
noise emission from digital apparatus set out in the Radio Interference
Regulation of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe
A prescrites dans le Règlement sur le brouillage radioélectrique publié
par le ministère des Communications du Canada.
European Union Declaration of Conformity
This product complies with the requirements of the European EMC
directive 89/336/EEC

Model SW214A
2
Normas Oficiales Mexicanas (NOM)
Electrical Safety Statement
INSTRUCCIONES DE SEGURIDAD
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el
aparato eléctrico sea operado.
2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia
futura.
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación
deben ser respetadas.
4. Todas las instrucciones de operación y uso deben ser seguidas.
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina
de baño, lavabo, sótano mojado o cerca de una alberca, etc.
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean
recomendados por el fabricante.
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea
recomendado por el fabricante.
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo
descrito en las instrucciones de operación. Todo otro servicio deberá ser referido a
personal de servicio calificado.
9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su
uso. La colocación del aparato eléctrico sobre una cama, sofá, alfombra o superficie
similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes que
impidan el flujo de aire por los orificios de ventilación.
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como
radiadores, registros de calor, estufas u otros aparatos (incluyendo amplificadores)
que producen calor.
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo
descrito en el instructivo de operación, o como se indique en el aparato.
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del
equipo no sea eliminada.
13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados
ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular
atención a los contactos y receptáculos donde salen del aparato.
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones
del fabricante.
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de
energia.
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por
un largo periodo de tiempo.
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados
sobre la cubierta u orificios de ventilación.
18. Servicio por personal calificado deberá ser provisto cuando:
A: El cable de poder o el contacto ha sido dañado; u
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o
C: El aparato ha sido expuesto a la lluvia; o
D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o
E: El aparato ha sido tirado o su cubierta ha sido dañada.

3 to 1 HDMI Switch
3
Contents
1. Introduction ....................................................................................... 4
1.1 General......................................................................................... 4
1.2 Features........................................................................................ 4
2. Installation ......................................................................................... 5
3. Troubleshooting................................................................................. 6
Contacting Black Box........................................................................ 6
Shipping and Packaging .................................................................... 6
4. Specifications..................................................................................... 7
5. Appendix ........................................................................................... 8
HDMI Connector Pin Assignment..................................................... 8
Remote Control Codes....................................................................... 8

Model SW214A
4
1. Introduction
1.1 General
Thank you for purchasing Black Box, Model SW214A, 3 input x 1
output HDMI Video Switch. This device is used to select (and boost)
one of 3 HDMI Video-plus-Audio inputs.
The selection can be made via the front panel or using an included IR
remote control. Since HDMI (and DVI) digital signals have cable
distance limitations, the SW214A provides a front panel button to
boost the output signal to drive long HDMI cables to about 50 feet.
Furthermore, the unit has built in automatic equalizers on the inputs so
that it can handle long input video cables (to 65 feet).
1.2 Features
•Perfect solution for high-end home-theatre setups
•Use only one connection to your HDMI compatible HDTV
•Equalizes the inputs for losses in the cable to 65 feet
•Can boost the output for driving cables to 50 feet.
•Front panel LED indicators for status monitoring
•Supports PC resolutions to UXGA (1600x1200) and HD to 1080p
•Includes a simple to use Remote Control
•Plug and play installation – takes minutes to setup
•Bandwidth of 1.65 Gbps (Giga bits / second) for sharp digital
image
•HDMI1.1, HDCP 1.1, and DVI1.0 Compliant

3 to 1 HDMI Switch
5
2. Installation
Front Panel
Rear Panel
Input Video Channel Indicator LEDs and Select Button
Press the Select button to sequentially select one of the 3 inputs
Signal Boost Button and LED indicator
If you have a cable longer than about 15 feet connected to the output
press this button once to boost the output signal strength. In general
leave this in off mode unless you are observing digital artifacts that
indicate signal loss such as pixilation, freezing, or loss of image.
Input Power Indicator
The unit does not have an on-off button. This light comes on as soon as
you plug in the power adapter.
DC Input Power Jack
Plug the included power supply to this jack. The red LED should come
on indicating power is on. NEVER SUBSTITUTE ANY OTHER
POWER SUPPLY AS THIS MAY (and probably will) DESTROY
THE UNIT.
HDMI Input and Output Connector
Using a high quality HDMI cable, connect the output (left most)
connector to your display. Connect your inputs starting with HDMI #1
(right most) - cable not supplied - Contact Black Box Corporation if
you cables.

Model SW214A
6
3. Troubleshooting
There are no field serviceable parts or circuits in the device. If you
think that the device is malfunctioning, please contact Black Box.
Contacting Black Box
If you determine that your extender is malfunctioning, do not attempt
to repair the unit. Contact Black Box at 724-746-5500. Before you do,
make a record of the problem. We will be able to provide more
efficient and accurate assistance if you have a complete description.
Shipping and Packaging
If you need to transport or ship your Switch:
• Package it carefully. Use the original container if possible.
• Before you shipping the unit, contact us to get a Return
Authorization (RA) number.

3 to 1 HDMI Switch
7
4. Specifications
Resolutions Output resolution is the same as input resolution.
Supported PC Resolutions
VGA - SVGA – XGA – SXGA – UXGA
(1600x1200)
Supported Component (YPbPr) Resolutions
480i - 576i - 480p – 576p - 720p - 1080i - 1080p
HDMI Data 1.65 Gbps (single link) - HDMI 1.1 compliant
Max. Distance 65 feet (20 m) on the input with automatic
equalization, 50 feet (15 m) maximum on the output. If
output cable length is more than 15 feet, then the signal
boost must be enabled.
Compliance CE; FCC Part 15 Subpart B Class A, IC Class
Max. Altitude 10,000 ft. (3048 m)
Temperature Operating: 32 to 122°F (0 to 50°C);
Storage: –40 to +185°F (–40 to +85°C)
Humidity Up to 95% non-condensing
Enclosure Metal
MTBF 85,000 hours (calculated estimate)
Power From utility-power (mains) outlet, through the included
external power supply. Voltage: 5 V DC Center-
Positive 2.6 A
Dimensions 1.0" High x 7.9" Wide x 4.1" Deep
Weight 1.3 lbs (20 Ounces)

Model SW214A
8
5. Appendix
HDMI Connector Pin Assignment
Remote Control Codes

© Co
py
ri
g
ht 2007. Black Box Cor
p
oration. All ri
g
hts reserved.
1000 Park Drive Lawrence, PA 15055-1018 724-746-5500 Fax [phone]