Blaupunkt BP 9.0A User manual

DIGITAL VIDEO RECORDER
BP 9.0A/AG FHD 2-CHANNEL
Enjo
Operating and Installation Instructions
y it.

CAUTIONS
•
•
•
•
•
•
•
•
•
Please insert the micro SD card in the right
direction to avoid damage to the card or the
device. If device shows error message, please
format the micro SD card from device menu.
Please reset device or change micro SD card
if similar error continues.
Note : All les will be deleted when formatting
micro SD card, please backup the important
les before format. When reset function is
selected, the device will return to default
setting.
Blaupunkt does not warrant the performance
of device if used with other Micro SD card
other than Blaupunkt Micro SD card
New Micro SD card must be formatted for
rst use.
Ensure bracket is installed correctly & rmly
on windscreen to avoid damage to device
and for better recording angle.
Please do not use product under wet
environment as device is not waterproofed/
water resistant.
Please do not record or take picture facing
sunlight.
To obtain clear image, please clean
windscreen and device lens regularly. Avoid
using device in dusty environment.
Handle device with care and avoid direct
impact on the device. Avoid using device in
high electromagnetic environment.
Operating temperature of the device is
-20°C ~ 70°C, storage temperature is
-30°C ~ 80°C. Continuous exposure to sunlight,
especially when locked in cabin where
Disclaimer :
•
•
•
•
•
•
•
temperature exceeds 80°C may result to
device malfunction, colour change, housing
and image distortion.
In no event shall Blaupunkt be liable for any
direct, indirect, punitive, incidental, special
consequential damages, to property or life,
improper storage, whatsoever arising out of
or connected with the use or misuse of our
products.
USA & CANADA : Products not intended for
sales in the United States and Canada. If
purchased in the U.S. or Canada, this product
is purchased as-is. No warranty, expressed or
implied is provided in the U.S. and Canada.
This device is NOT intended to be used for
illegal purpose, surveillance and shall not be
used in any form as evidence for claim
purposes.
Some countries prohibit drivers from mounting
anything on the windshield, or restrict
mounting to specic areas of the windshield.
It is the owner’s responsibility to mount the
device in compliance with local laws.
Error may occur depending on the surrounding
environment and the voltage of the car.
Blaupunkt is not liable/responsible for
non-recorded event, missing les, etc.
If the car battery voltage is lesser than
the setting value of cut-o voltage, device will
stop recording even at park recording mode.
1

STRUCTURE
Features
•
•
•
•
•
•
•
•
•
•
•
•
Resolution : Front 2MP FHD 1080 30fps, Rear : 2MP FHD 1080 30fps
Wide viewing angle : Front - 140, Rear - 120°
Screen display : Front, Rear, PIP
3.5” touch screen LCD display
Preview, download, playback Videos & Settings Conguration via Smartphone Wireless
Control App
Format-free Technology
Fixed ‘High Temperature’ & Variable ‘Low Car Battery Voltage’ Cut-o
24-hour automatic park recording
Motion detection, automatic display shutdown, G-sensor, loop recording
Support up to 128GB Micro SD, Class 10 & above Micro SD
Global Positioning Tracker (Available for BP9.0AG only)
Advanced Driver Assistance System (ADAS) Supported (Available for BP9.0AG only)
2
1
2
13
12
14 15
3
4
5 6 7
8
9
10
11
1. Rear DVR cable output
2. GPS tracking cable input
3. Wireless control dongle input
4. LCD touch screen
5. Speaker
6. Lens
7. Microphone
8. Micro SD card slot
9. Recording indicator light
10. GPS tracking light
11. On/O
12. Power cable input
13. Bracket hole
14. Rear DVR cable input
15. Rear lens

FUNCTION
3
Mode Category Function
Quick Menu Live Live Image
Menu Setting Menu
Mute Voice REC ON/OFF
VoiceGuide Speaker ON/OFF
PlayList Playback List
Driving/Parking REC N (Driving), P (Parking) REC
OSD OSD On/O
Front LED LED On/O
Time Time Set Set Time
Standard Time Set Set Standard Time
Summer Time Set Summer Time
System Wi-Fi Wi-Fi On/O
Cut O Voltage Set voltage for car constant power discharge
Auto LCD O O after 30sec/on 60sec
Language Set Language
High Temp Cut O Set High Temperature Cut O
Speaker Volume Set Speaker Volume
Camera Camera Set Adjust Brightness, Contrast, Chroma
REC Set Night Vision Set Brightness for Night Time Parking Mode
Front Video Quality Set Front Video Quality
Rear Video Quality Set Rear Video Quality
REC Mode Continuous / Shock
REC CH Set REC Channel
Mic Volume Set REC Volume
Motion Level Set Motion Sensor Level
Shock Level (N) Set Shock Sensor Level (Driving)
Shock Level (P) Set Shock Sensor Level (Parking)
Others System Info Display System Information
Memory Adjustment Adjust REC Folder Capacity Rate
Touch Calibration Calibrate Touch Screen
SD Card Format Format Micro SD Card
Factory Init Initialize Conguration
ADAS Operating Speed Set ADAS Operating Speed
Warning Warning On/O
LDWS Set LDWS Warning during Driving
FVSA Set FVSA Warning during Driving
System Setup
Tap the left side of the LCD screen to enter into MENU while recording.Tapping right side of the
screen will enter into dierent Video mode instead of MENU

Android Mobile Application
Search “Blaupunkt DVR BP9.0A” on Google Play.
Mobile App device OS version requirements : Android 4.4 (KitKat) or higher.
Pair DVR with Android Smartphone (DVR Firmware ver 1.1.604 or higher)
The distance range between the DVR (with Wireless Control dongle) and smartphone is
approximately 10 meters (33ft) in an open eld environment.
1. DVR (Ensure Wireless dongle is installed on the DVR USB port) :
2.
3.
a. At video display mode, tap screen to display Main Menu.
b. Select MENU to enter into menu page.
c. Then select SYSTEM SET.
d. Then select Wi-Fi to turn on Wi-Fi.
Android smartphone (Ensure Location is turned on before connecting to DVR)
Enter BP9.0A app from the smartphone, select “START” at Home Page (Figure 1). Smartphone
will connect to DVR’s Wi-Fi automatically
These options will appear after selecting “START” :
Live View, VOD View, Download View, Conguration, F/W Update (Figure 2).
FUNCTION
Google Play Store
IMPORTANT NOTICE :
For security purposes, after the Android smartphone is sucessfully connected to the device. It is advisable to change
the WLAN security password. Please refer to page 8 for password and update details
Figure 1 Figure 2
4

iOS Mobile Application
Search “Blaupunkt DVR BP9.0A” on App Store.
Mobile App device OS version requirements : iOS 10.0.2 or higher.
Pair DVR and Smartphone (DVR Firmware ver 1.1.604 or higher)
The distance range between the DVR (with Wireless Control dongle) and smartphone is
approximately 10 meters (33ft) in an open eld environment.
1. DVR (Ensure Wireless dongle is installed on the DVR USB port) :
2.
3.
a. At video display mode, tap screen to display Main Menu.
b. Select MENU to enter into menu page.
c. Then select SYSTEM SET
d. Then select Wi-Fi to turn on Wi-Fi
iOS smartphone (Ensure Location is turned on before connecting to DVR)
Go to smartphone Wi-Fi setting to search and connect to DVR Wi-Fi - ‘Blaupunkt_...’ and key in
‘00000000’, if device request for password.
After successful pairing, enter into mobile app to start. At Main Menu select “START” at Home Page
(Figure 1).
These options will appear : Live View, VOD View, Download View, Conguration, F/W Update
(Figure 2).
FUNCTION
5
App Store
Figure 1 Figure 2

LIVE VIEW (Show real time video)
1. Select to change Front or Rear camera view
2. Select to start or stop recording
3. Select to return to MENU
4. Select to view recorded video
VOD VIEW (Playback List)
1. Normal Video Playlist
2. Event/Emergency Playlist
3. Park Monitoring Playlist
4. Return to MENU
5. Play recording
6. Download recording
DOWNLOAD VIEW
1. Normal Video Playlist
2. Event/Emergency Playlist
3. Park Monitoring Playlist
4. Return to MENU
5. Play recording
6. Delete downloaded le
FUNCTION
6
21 3 4
1
2
3
456
456
1
2
3

CONFIG SETTINGS
Basic settings
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
System settings
1.
2.
3.
4.
Mode setting
Front video quality
Rear video quality
Motion level
Shock level (Park)
Shock level (Driving)
Speaker volume
Mic volume
Cut-o voltage
High temp shutdown
Auto LCD o time
OSD (On Screen Display) output
Speed display
Front LED
Recording channel
Speed alarm
Night vision
Language
Wi-Fi settings
LDWS (Lane Departure Warning
System) speed
LDWS warning
FVSA (Front Vehicle Departure Alert)
Standard time set
DST (Daylight saving time)
Camera sensor setting
Adjust ratio of memory (All data will be
deleted when ratio setting is adjusted,
backup data before changing the setting)
FUNCTION
7

Reset
All setting will be reset to default setting
Format SD card
All data will be deleted after formatting
WLAN security
Change wireless connection password by
entering alphabetical or numerical characters.
Device will be reset to default setting when
resetting the password.
Default password : 00000000
FIRMWARE UPDATE
Visit www.blaupunkt.com to download updates
FUNCTION
8
1.1.604

FUNCTION
9
Blaupunkt DVR BP9.0A/AG PC Viewer
Visit www.blaupunkt.com to download below viewer.
Cut-o Voltage Setting
1. Setting on LCD Screen : Menu > System Set > Cut O Voltage
2. Setting on Wireless Control App : Conguration > Cut-O Voltage
With the conguration on LCD screen or Wireless Control App, set the voltage level to cut o
automatically in order to prevent vehicle battery drainage. The device will stop the discharge
of the vehicle battery by blocking power supply to the DVR if the voltage drops below a
congured value.
NOTE :
Older les will be overwritten whenever the card memory is full and new storage space is required.
Backup recordings regularly to prevent important les from being overwritten.
View Video & Map Extract le to
play front/rear
video le in normal
video player
Folder Search
File Type
View Video & Files
P:/microSD

SPECIFICATIONS
ACCESSORIES
10
Resolution :Front : 2MP, 140° wide viewing angle, Rear : 2MP, 120° wide viewing angle
Display mode : Front, Rear, PIP
Screen display : 3.5" Touch Screen (320x480)
Mode : Video
G-sensor : Supported
Memory : Support up to 128GB Micro SD, Class 10 & above
Resolutions : Front : 1920x1080 FHD (30fps), Rear : 1920x1080 FHD (30fps)
Loop recording : 120MB/43sec
Video format : AVI
Exposure : -5 ~ +5
24hr Monitoring : Supported
Motion detection : 60MB/21sec
Built-in : G-sensor, microphone, speaker
Display shutdown : Supported
Language : English, Korean, Japanese, Thai
Playback Function : Supported
Power Supply : DC 12V ~ 24V
Operating temperature : -20° ~ 70°
Storage temperature : -30° ~ 80°
Time zone : GMT -11.00 ~ +12.00
Format-free Technology : Supported
*Subject to change
Front DVR Rear DVR Hardwire Cable 3M Bracket Rear DVR Power Cable
Micro SD Card Cable Clip Wireless Dongle
Global Positioning Tracker
Module (BP9.0AG only)
BP10.0 A/AG

Designed and engineered by Blaupunkt
2 301 17 006 16 02
2 301 17 007 16 02
R6
This manual suits for next models
1
Table of contents
Other Blaupunkt DVR manuals

Blaupunkt
Blaupunkt BP 3.1 A User manual

Blaupunkt
Blaupunkt BP 8.0 FHD 2-CHANNEL Assembly instructions

Blaupunkt
Blaupunkt VIO-NVR40 User manual

Blaupunkt
Blaupunkt BP 9.0A User manual

Blaupunkt
Blaupunkt BP 2.0 FHD User manual

Blaupunkt
Blaupunkt BP 7.1 Assembly instructions

Blaupunkt
Blaupunkt BP 2.2 FHD User manual

Blaupunkt
Blaupunkt BP 4.0 - FHD User manual

Blaupunkt
Blaupunkt BP 7.0 GPS User manual

Blaupunkt
Blaupunkt BP 2.2A User manual