BLINDS2GO PerfectFIT User manual

Installation Guide
PerfectFIT Roller Blinds
Assembling the frame
Unpack the blind and frame (the side and bottom frames are packed separately in the same box), then lay out all the parts and push
the control chain to one side so it doesn’t get tangled.
Attach the side frames to the top
and bottom by inserting the pegs on
each corner section into their
corresponding channels in the
frames.
Before you slot the frames together,
clip the corner cover pieces onto the
corner joints so that they’re firmly
attached.
We’ve made a handy video version of this fitting guide, just
click the play button to view it.
If you prefer to print the instructions or simply to follow
step-by-step, just keep reading.
Guide the side runners on the ends of
the blind’s bottom bar into the
channels on the inside of the side
frames.
The side frame that has
the chain-runner fitted
must be on the same
side of the blind as the
control chain.

Installation Guide
PerfectFIT Roller Blinds
Push the frame towards the window until the oval slots lock
onto the prongs of each of the brackets. The installation of the
blind is now complete.
Line the assembled blind up with the brackets so that the centre prong of the bracket is aligned with the oval slot on the frame.
Ensure that the frame is sitting on the inside edge of each of the brackets (between the bracket and the glass).
Installing the blind
Installing the brackets
Securing the operating chain
Locate the correct position for the brackets by
holding a credit card or store card vertically in
the corner of the glass - the bracket will sit in
line with the edge of the card.
Gently pry the screw cap from the chain
runner, then unscrew and slide off the
outer part of the runner.
Hook the chain over the exposed runner. Slide the outer part of the runner back into
place and reinsert the screw and screw
cover.