Blizzard Lighting COLORISE Infiniwhite User manual

Blizzard Lighting, LLC
www.blizzardlighting.com
Waukesha, WI USA
Copyright (c) 2015
Universal Wireless DMX

Page 2
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
TABLE OF CONTENTS
Colorise™ Inniwhite 1
1. Getting Started 3
What’s In The Box? 3
Getting It Out Of The Box 3
Powering Up! 3
Getting A Hold Of Us 3
Safety Instructions (Don’t run with scissors!) 4
2. Meet The Colorise™ Inniwhite LED Par 5
Main Features 5
DMX Quick Reference 5
The Colorise™ Inniwhite Pin-up Picture 6
3. Setup 7
Connecting A Bunch Of Colorise™ Inniwhite Fixtures 7
Data/DMX Cables 7
Setting the DMX Input Connector as the Active DMX Input 7
Cable Connectors 8
3-Pin??? 5-Pin??? Huh? 8
Take It To The Next Level: Setting up DMX Control 8
Fixture Linking (Master/Slave Mode) 9
Mounting/Rigging 9
Using the AnyFi™ Wireless DMX Receiver 10
Setting the Fixture to Receive Wireless Signal 10
Resetting The Wireless 10
Select W-DMX™ or Standard 2.4GHz Receiver 10
Successful W-DMX™ Connections 11
Standard 2.4GHz Mode: Selecting the Channel Group 11
4. Operating Adjustments 12
Navigating The Control Panel 12
Control Panel Menu Structure 13
DMX Mode 14
Set the Starting DMX Address 14
Setting the DMX Channel Mode 14
Slave Mode 14
Dimming Mode Settings 14
LED Display On/Off and Menu Lock 14
Custom Programs 15
Auto and Sound Active Modes 15
Color Calibration Settings 16
Custom Static Colors & Preset Colors 16
Fixture Reset Functions 17
Data Sync Feature 17
Fixture Information 17
DMX Value In-Depth Reference Guide 18
DMX In-Depth Reference 19
5. Appendix 20
A Quick DMX Lesson 20
Troubleshooting 20
Keeping Your Colorise™ Inniwhite As Good As New 21
Returns (Gasp!) 21
Shipping Issues 21
Tech Specs 22
Dimensional Drawings 23

Page 3
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
1. GETTING STARTED
What’s In The Box?
• 1 x Colorise™ Inniwhite Professional LED PAR Fixture
• An Ever-So-Handy Power Cord
• This Lovely User Manual
Getting It Out Of The Box
Congratulations on the purchase of your new totally sweet Colorise™ Inniwhite LED
par xture. She’s a real stunner alright, denitely the cat’s pajamas! Now that you’ve
got your Colorise™ Inniwhite (or hopefully, Colorises!), you should carefully unpack
the box and check the contents to ensure that all parts are present and in good condi-
tion. If anything looks as if it has been damaged in transit, notify the shipper immedi-
ately and keep the packing material for inspection. Again, please save the carton and
all packing materials. If a xture must be returned to the factory, it is important that
the xture be returned in the original factory box and packing.
Powering Up!
All xtures must be powered directly off a switched circuit and cannot be run off a
rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer
channel is used solely for a 0% to 100% switch.
AC Voltage Switch - Not all xtures have a voltage select switch, so please verify that
the xture you receive is suitable for your local power supply. See the label on the
xture or refer to the xture’s specications chart for more information. A xture’s
listed current rating is its average current draw under normal conditions. Check the
xture or device carefully to make sure that if a voltage selection switch exists that it is
set to the correct line voltage you will use.
Warning! Verify that the voltage select switch on your unit matches the line
voltage applied. Damage to your xture may result if the line voltage applied
does not match the voltage indicated on the voltage selector switch. All
xtures must be connected to circuits with a suitable Ground (Earthing).
Getting A Hold Of Us
If something is wrong, just give us a call. We’ll be happy to help, honest.
Blizzard Lighting
N16 W23390 Stoneridge Dr. Ste E
Waukesha, WI 53188 USA
www.blizzardlighting.com
414-395-8365
Disclaimer: The information and specications contained in this document are subject
to change without notice. Blizzard Lighting™ assumes no responsibility or liability
for any errors or omissions that may appear in this user manual. Blizzard Lighting™
reserves the right to update the existing document or to create a new document to
correct any errors or omissions at any time. You can download the latest version of this
document from www.blizzardlighting.com.
Author: Date: Last Edited: Date:
J. Thomas 8/20/2015 J. Thomas 8/27/2015

Page 4
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
SAFETY INSTRUCTIONS
• Please keep this User Guide for future use. If you sell the unit to someone
else, be sure that they also receive this User Guide.
• ALWAYS make sure that you are connecting to the proper voltage, and that
the line voltage you are connecting to is not higher than that stated on the
decal or rear panel of the xture.
• This product is intended for indoor use only.
• To prevent risk of re or shock, do not expose xture to rain or moisture.
• Make sure there are no ammable materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least
20in (50cm) from adjacent surfaces. Be sure that no ventilation slots are
blocked.
• ALWAYS disconnect from the power source before servicing or replacing fuse
and be sure to replace with same fuse size and type.
• ALWAYS secure xture using a safety chain. NEVER carry the xture by its
cord. Use its carrying handles.
• DO NOT operate at ambient temperatures higher than 104°F (40°C).
• In the event of a serious operating problem, stop using the unit immediately.
NEVER try to repair the unit by yourself. Repairs carried out by unskilled people
can lead to damage or malfunction. Please contact the nearest authorized
technical assistance center. Always use the same type spare parts.
• NEVER connect the device to a dimmer pack.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
Caution! There are no user serviceable parts inside this unit. Do not open the
housing or attempt any repairs yourself. In the unlikely event your unit may
require service, please visit http://www.blizzardlighting.com/support.

Page 5
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
2. MEET THE COLORISE™ INFINIWHITE LED PAR
MAIN FEATURES
• 18x 5W 3-in-1 ACW LEDs, 100,000 hours
• Built-in AnyFi™ wireless DMX receiver (2.4GHz or W-DMX™)
• Achieve white color temperatures from 2600k-7500k
• Natural convection cooled, totally silent operation
• User selectable 32-bit dimming curves
• Variable electronic dimmer strobe
• Built-in color & chase macros via DMX
• Built-in auto programs & sound active in standalone and M/S
• Color mixing ability in standalone mode
• 25 degree beam angle
• User selectable 3/4 or 7-channel DMX modes
• Flicker-free constant-current LED driver
• LED control panel with 4* touch sensitive buttons
• 3-pin male input and 3-pin female output
• PowerCon™ compatible AC power In/Out connectors
DMX Quick Reference - 7-Channel Mode
Channel 7-Channel
1 Dimmer
2 Amber Intensity
3 Warm White Intensity
4 Cool White Intensity
5 Strobe
6Custom Colors + Auto
7 32-bit Dimming
DMX Quick Reference - 4/3-Channel Modes
Channel 4-Channel 3-Channel
1 Dimmer Amber Intensity
2 Amber Intensity Warm White Intensity
3 Warm White Intensity Cool White Intensity
4 Cool White Intensity ---

Page 6
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
Figure 1: The Colorise™ Inniwhite Pin-Up Picture
High Power 5W 3-in-1
AWC LEDs
Heavy-Duty Cast
Aluminum Enclosure
Dual
Mounting
Yokes
Locking
Adjustment
Knobs
Figure 2: The Rear Connections
AC Power Out
DMX In DMX Out
AC Power In
4-Character LED
Control Panel
Antenna
Wireless LED
Indicator

Page 7
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
3. SETUP
Fuse Replacement
CAUTION! The Colorise™ Inniwhite utilizes a high-output switch-mode power
supply with an internal fuse. Under normal operating conditions, the fuse
should not require replacement. The fuse is eld replaceable, however it is an
advanced procedure suited to qualied individuals. Should your xture require
replacement, please contact Blizzard Lighting for instructions, or to return your
unit for service.
Connecting A Bunch of Colorise™ Inniwhite Fixtures
You will need a serial data link to run light shows using a DMX-512 controller
or to run shows on two or more xtures set to sync in master/slave operating
mode. The combined number of channels required by all the xtures on a serial
data link determines the number of xtures the data link can support.
Fixtures on a serial data link must be daisy chained in one single line. Also, con-
necting more than 32 xtures on one serial data link without the use of a DMX
optically-isolated splitter may result in deterioration of the digital DMX signal.
The maximum recommended cable-run distance is 500 meters (1640 ft). The
maximum recommended number of xtures on a serial data link is 32 xtures.
Data/DMX Cabling
To link xtures together you’ll need data cables. You should use data-grade
cables that can carry a high quality signal and are less prone to electromagnetic
interference.
For instance, Belden© 9841 meets the specications for EIA RS-485 applica-
tions. Standard microphone cables will “probably” be OK, but note that they
cannot transmit DMX data as reliably over long distances. In any event, the
cable should have the following characteristics:
2-conductor twisted pair plus a shield
Maximum capacitance between conductors – 30 pF/ft.
Maximum capacitance between conductor & shield – 55 pF/ft.
Maximum resistance of 20 ohms / 1000 ft.
Nominal impedance 100 – 140 ohms
Setting the DMX Input Connector as the Active DMX Input
Navigate the main menu to reach SET, press <ENTER>, then use the <UP/
DOWN> buttons until SIGN is displayed, then press <ENTER> again. Now
use the <UP/DOWN> buttons to highlight CABL (cable mode), and press
<ENTER> to conrm.

Page 8
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
Cable Connectors
Cables must have a male XLR connector on one end and a female XLR connec-
tor on the other end. (Duh!)
CAUTION: Do not allow contact between the common and the
xture’s chassis ground. Grounding the common can cause a ground
loop, and your xture may perform erratically. Test cables with an
ohm meter to verify correct polarity and to make sure the pins are not
grounded or shorted to the shield or each other.
3-Pin??? 5-Pin??? Huh?!?
If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter.
They are widely available over the internet and from specialty retailers If you’d like to build your own, the
chart below details a proper cable conversion:
Conductor 3-Pin Female
(Output)
5-Pin Male
(Input)
Ground/Shield Pin 1 Pin 1
DMX Data (-) Pin 2 Pin 2
DMX Data (+) Pin 3 Pin 3
Not Used. No Connection. No Connection.
Not Used. No Connection. No Connection.
Take It To The Next Level: Setting Up DMX Control
Step 1: Connect the male connector of the
DMX cable to the female connector (output) on
the controller.
Step 2: Connect the female connector of the
DMX cable to the rst xture’s male connector
(input). Note: It doesn’t matter which
xture address is the rst one connected. We
recommend connecting the xtures in terms
of their proximity to the controller, rather than
connecting the lowest xture number rst, and
so on.
Step 3: Connect other xtures in the chain
from output to input as above. Place a DMX
terminator on the output of the nal xture to
ensure best communication.

Page 9
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
Fixture Linking (Master/Slave Mode)
1. Connect the (male) 3 pin connector side of the
DMX cable to the output (female) 3 pin connector of
the rst xture.
2. Connect the end of the cable coming from
the rst xture which will have a (female) 3 pin
connector to the input connector of the next xture
consisting of a (male) 3 pin connector. Then,
proceed to connect from the output as stated above
to the input of the following xture and so on.
A quick note: Often,
the setup for Master-
Slave and Standalone
operation requires that
the rst xture in the
chain be initialized for
this purpose via either
settings in the control
panel or DIP-switches.
Secondarily, the xtures
that follow may also
require a slave setting.
Check the “Operating Adjustments” section in this manual for com-
plete instructions for this type of setup and conguration.
Mounting & Rigging
This xture may be mounted in any SAFE position provided there is
enough room for ventilation.
It is important never to obstruct the fan or vents pathway. Mount the
xture using a suitable “C” or “O” type clamp. The clamp should be
rated to hold at least 10x the xture’s weight to ensure structural sta-
bility. Do not mount to surfaces with unknown strength, and ensure
properly “rated” rigging is used when mounting xtures overhead.
Adjust the angle of the xture by loosening both knobs and tilting the
xture. After nding the desired position, retighten both knobs.
• When selecting installation location, take into consideration lamp
replacement access (if applicable) and routine maintenance.
• Safety cables MUST ALWAYS be used.
• Never mount in places where the xture will be exposed to rain,
high humidity, extreme temperature changes or restricted ventilation.

Page 10
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
Using the AnyFi™ Wireless DMX Receiver
In addition to the unbridled thrill you already received the rst time you turned on your
xture, you’ll be delighted to know that your Colorise™ Inniwhite is equipped to work
seamlessly with our own Skywire™ 2.4GHz wireless DMX products,
as well as W-DMX™ wireless products. W-DMX™ is a two-time
award winning wireless DMX technology, created and owned by
Wireless Solution Sweden AB.
Skywire™ wireless DMX products feature 512 auto-assigning
frequencies in 7 groups allowing up to 7 systems to run
simultaneously in the same space, completely free of interference,
with reliable wireless communication for over 1000 feet line-of-
sight! Using W-DMX™ wireless, you can expect an outstanding wireless range of up to 500
meters (line-of-sight), very easy setup, and leave any worries behind concerning loss of signal
due to its built-in FHSS technology (Frequency Hopping Spread Spectrum).
So rst, if you would like to use Standard 2.4GHz wireless DMX, you will need a Blizzard
wiCICLE® transmitter, Lightcaster™ transceiver, or any Blizzard Lighting controller that has
this type of built-in wireless transmitter, like our Kontrol 6 Skywire™ to act as a transmitter.
And if you plan on using W-DMX™ 2.4GHz wireless for your setup, you will need a W-DMX™
transceiver to broadcast the signal from your controller, such as our Lightcaster W-DMX™.
Ready to move on? Well alrighty!
1.) IMPORTANT - Set the Fixture to Receive Wireless Signal in the Control Panel
a.) Navigate the main menu to reach SET, press <ENTER>, then use the <UP/
DOWN> buttons until SIGN is displayed, then press <ENTER> again. Now use the
<UP/DOWN> buttons to highlight 2.4G (wireless mode), and press <ENTER> to
conrm.
2.) Resetting The Wireless
a.) Navigate the main menu to reach SET, press <ENTER>, then use the <UP/
DOWN> buttons until WIRE is displayed, then press <ENTER> again.
b.) From here, you can use the <UP/DOWN> buttons to highlight REST and press
<ENTER>, select YES, then <ENTER> to reset the wireless setup.
3.) Select W-DMX™ or Standard 2.4GHz Receiver
a.) Make sure the device you are using to transmit signal with is powered on.
b.) Navigate the main menu to reach SET, press <ENTER>, then use the <UP/
DOWN> buttons until WIRE is displayed, then press <ENTER> again.
c.) Now use the <UP/DOWN> buttons to highlight KEY in the menu, and press
<ENTER>.
d.) At this point, please note that every time you touch the <ENTER> button, the
wireless LED status indicator changes between 4 colors (but only 2 are functional):
• GREEN: W-DMX™ 2.4 GHz Mode
• YELLOW: Standard 2.4 GHz Mode (wiCICLE™ & LightCaster Compatible)
*Note: RED and BLUE currently have no function during this selection process.
e.) While the LED indicator is illuminated in GREEN (for W-DMX) or YELLOW (for
Standard 2.4GHz), press and hold the <ENTER> button for 3 seconds to make your
chosen wireless type the active wireless DMX signal type.
For W-DMX™ connections, you should be done. The xture will detect the signal!
*For Standard 2.4GHz connections, please continue to Step 5 on the next page.
Universal Wireless DMX

Page 11
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
4.) Successful W-DMX™ Connections
The LED status indicator will blink, then turn white if searching for a signal. When a
signal connection is established, the LED on the xture will be solid GREEN, if signal is
lost the LED will ash RED.
W-DMX™ Setup Examples:
1.) One transceiver with multiple receiver setups:
a.) Power on all units.
b.) On the receiving W-DMX xtures, follow the previous instructions to pair them
with the transmitting unit.
2.) Multiple transceiver setups, with multiple receivers; e.g. 3 groups consisting of a
transceiver & receiver(s) named A, B, and C:
a.) Turn power off of all units.
b.) Group “A” gets powered on, then follow step 1 above.
c.) Group “B” gets powered on, then follow step 1 above.
d.) Group “C” gets powered on, then follow step 1 above.
5.) Standard 2.4GHz Mode: Selecting the Channel Group
1. After selecting Standard 2.4GHz Mode in Step 3 on the previous page, the xture is ready
and waiting for your input to select the frequency group to match that of your transmitting
source.
a.) Tap the <ENTER> button repeatedly to scroll through the 7 color group frequencies:
• GROUP 1: RED
• GROUP 2: GREEN
• GROUP 3: YELLOW
• GROUP 4: BLUE
• GROUP 5: VIOLET
• GROUP 6: CYAN
• GROUP 7: WHITE
b.) While your chosen group number/color is illuminated on the status LED, press and
hold the <ENTER> button for 3 seconds.
2. The LED on the transmitter will blink RED slowly until communication is established with
the receiver. The status LED on the receiving xtures will be illuminated in the color of the
group that it is set on until communication is established.
3. Once the clearest channel is auto-selected, the status LEDs will blink quickly on both the
transmitter and receiver. NOTE: The color of the status LED DURING operation does not
indicate channel group, instead it indicates whether the unit is transmitting or receiving.
That’s It!
NOTE: “GROUP” number also
corresponds to the “GROUP” setting
on our LightCaster™ wireless DMX
transceiver, wiCICLE™ transmitter,
and all Blizzard Skywire™ wireless
controllers.

Page 12
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
4. OPERATING ADJUSTMENTS
The Control Panel
All the goodies and different modes possible with the Colorise™Quadra are ac-
cessed by using the control panel on the rear of the xture. There are 4 control
buttons below the LED display which allow you to navigate through the various
control panel menus.
<MENU>
Is used to navigate to the previous higher-level menu item.
<UP>
Scrolls through menu items and numbers in ascending order.
<DOWN>
Scrolls through menu items and numbers in descending order.
<ENTER>
Is used to select and conrm/store the current selection.
The control panel LED display shows the menu items you select from the menu
map on page #13. When a menu function is selected, the display will show im-
mediately the rst available option for the selected menu function. To select a
menu item, press <ENTER>.
Use the <UP> and <DOWN> buttons to navigate the menu options. Press the
<ENTER> button to select the menu function currently displayed, or to enable
a menu option. To return to the previous option or menu without changing the
value, press the <MENU> button.

Page 13
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
Control Panel Menu Structure
ADDR 001-512 To choose the DMX address
STAT A Amber intensity (0% <--> 100%)
W Warm White intensity (0% <--> 100%)
C Cool white intensity (0% <--> 100%)
SHUT Flash / strobe speed (0-255)
SET CHMD 7CH To run in 7-channel mode
4CH To run in 4-channel mode
3CH To run in 3-channel mode
DIM
(dimming)
LIN Linear dimming curve
SQR Square law curve
ISQR Inverse square law curve
SCUR S-curve
LIN. Linear dimming curve (smooth)
SQR. Square law curve (smooth)
ISQR. Inverse square law curve (smooth)
SCUR. S-curve (smooth)
DISY ON LED menu display is on continually
2MIN LED menu display shuts off after 2 minutes of inactivity
LOCK YES/NO Menu locks after 2min. Hold any key 10 seconds to unlock.
SIGN <ENTER> Choose the signal type: 2.4G (wireless) or CABL (cable)
WIRE <ENTER> Wireless Reset: REST, or KEY desired wireless mode (color coded LED)
CTST CT01-CT10 <ENTER> A/W/C adjustments for custom color banks 01-10
CHS1 <ENTER> Custom program 1
CHS2 <ENTER> Custom program 2
CHS3 <ENTER> Custom program 3
SOU1 <ENTER> Sound Active Mode 1 (color changing)
SOU2 <ENTER> Sound Active Mode 2 (white strobe)
PROG CHS1-CHS3
Custom
programs
1-3.
SC01-SC20
20 scenes
for each
custom
program.
A (0-255) SHUT (strobe, 0-255)
W (0-255) TIME (duration, 0-255)
C (0-255) WAIT (before fade, 0-255)
USE (use scene, YES/NO)
INFO SOFT Vx.x Software version information
POW Current automated overheat protection level (100%/80%/50%)
LOAD ST L Restore factory settings
PR L Restore factory program settings
SEND YES/NO Sync settings between xtures via DMX

Page 14
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
DMX Mode
Allows the unit to be controlled by any universal DMX controller.
Setting the DMX Address:
1.) The default mode for the xture is DMX, which appears as 001 on the LED readout. To
select a different DMX address, using the <MENU> button, select ADDR, then hit <ENTER>.
Use the <UP/DOWN> buttons to select the correct address, then hit <ENTER> to conrm.
Setting the DMX Channel Mode:
1.) To select a DMX channel mode, press the <MENU> button, then use the <UP/DOWN>
buttons until the display reads SET and press the <ENTER> button. Then use the <UP/
DOWN> buttons until the display reaches CHMD, and press <ENTER>. Now press the <UP/
DOWN> buttons again to highlight your desired DMX channel mode, and press the <ENTER>
button to conrm.
Slave Mode:
1.) Daisy chain the xtures DMX in/out, having the controller at the beginning of the line.
2.) There is nothing else to it! The rst xture in the DMX chain is the master xture, and the
following xtures will follow the master.
Dimming Mode Settings:
Allows users to set the xture to use 1 of 4 (x2) dimming curve settings for smoother (and slower)
dimming capabilities. In the control panel menu, there are two settings for each curve that are
distinguishable from one another by the trailing dot.
*The curve settings with the trailing dot adds a bit more delay to the curve for a smoother effect.
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to SET and press <ENTER>,
then <UP/DOWN> buttons again to scroll to DIM, and press the <ENTER> button.
2.) Now use the <UP/DOWN> buttons to highlight either LIN (Linear), SQR (Square), ISQR
(Inverse Square), SCUR (S-Curve), LIN. (Smooth Linear), SQR. (Smooth Square), ISQR.
(Smooth Inverse Square), or SCUR. (Smooth S-Curve), then hit <ENTER>.
LED Display On/Off and Menu Lock:
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to SET and press <ENTER>,
then navigate to DISY, and press the <ENTER> button.
2.) In DISY, you can set the LED menu display to be continually on, or shut off after 2 minutes
of inactivity. In LOCK which is in the main (top) menu, you can select either YES or NO, and
press <ENTER> to save. Enabling key lock will disable the functionality of the buttons after 2
minutes. To exit this locked setting, press and hold any button for 10 seconds.
DMX% DMX% DMX% DMX%
Output Output Output Output
(LIN, LIN.) (SQR, SQR.) (ISQR, ISQR.) (SCUR, SCUR.)
Linear Curve Square Law Inverse Square Law S-Curve

Page 15
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
Custom Programs:
Allows users to create up to 3 customizable, 20 scene programs that are directly accessible via the control
panel and also in DMX mode.
Creating A Custom Program:
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to PROG, and press <ENTER>.
2.) Now use the <UP/DOWN> buttons to highlight your choice of either CHS1, CHS2, or
CHS3 and press <ENTER>.
3.) Start with editing scene 1 (SC01), customizing it to your liking by using the choices outlined
in the table below. You can mix any color, and set the duration (in seconds) before moving on to
the next scene (TIME 0-255). You can also add a fade in effect to the start of this scene (WAIT
0-255), and/or strobe (SHUT 0-255). Finally, if you want to use this scene in your program, be
sure to enable it (USE: YES/NO).
4.) Repeat the above process to create up to 20 scenes in each of the 3 customizable programs.
A (0-255) - Amber Intensity SHUT (0-255) - Strobe (slow - fast) USE (YES/NO) Use Scene in Program?
W (0-255) - Warm White Intensity TIME (0-255) - Scene Time (seconds) IMPORTANT:
If USE is set to NO, or TIME is set
to 0, the scene will not run!C (0-255) - Cool White Intensity WAIT (0-255) - Fade In (fast - slow)
Running A Custom Program:
1.) To view your newly created lighting masterpiece, use the <MENU> and <UP/DOWN>
buttons to navigate to AUTO, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight your choice of either CHS1, CHS2, or CHS3 and
press <ENTER>. These are also directly accessible from the Effect Channel in DMX mode.
Auto and Sound Active Modes:
Set single or Master/Slaved units to run in sound active or auto mode at user selectable speeds.
Auto Mode:
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to navigate to AUTO, and press
the <ENTER> button.
2.) Now use the <UP/DOWN> buttons to highlight any program ranging from CHS1-CHS3,
and press <ENTER>.
Sound Active Mode:
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to AUTO and press <ENTER>,
then with the <UP/DOWN> buttons navigate to SOU1 (color change), or SOU2 (white strobe
only), and press the <ENTER> button.

Page 16
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
Custom Static Colors & Preset Colors:
Allows the user to create and save up to 10 custom static colors for use in standalone or DMX mode.
Custom Mixing and Preset Mixed Colors
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to STAT and press <ENTER>,
then <UP/DOWN> buttons to select A/W/C and push <ENTER> to conrm your selection.
Then in the same manner, you can select SHUT to add s strobe effect.
Mix and Save Custom Colors (1-10)
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to CTST and press <ENTER>,
then <UP/DOWN> buttons to select a color bank from CT01-CT10, and push <ENTER> to
conrm your selection.
2.) Now use the <UP/DOWN> buttons to highlight either A (Amber Level), W(Warm White
Level), or C (Cool White Level), then hit <ENTER>.
3.) Finally, using the <UP/DOWN> buttons, select the maximum level for each color between
000-255 (000=off), and hit <ENTER> to conrm your choice(s).
4.) These 10 custom colors can be accessed and edited to your liking at any time, and will be
saved even after powering off the xture.
5.) Your custom static colors are directly accessible from the Effect Channel in DMX mode.
Fixture Reset Functions:
Allows users to reset the xture to factory default settings, without loosing customized settings, or reset
the custom programs exclusively.
1.) Use the <MENU> and <UP/DOWN> buttons to navigate to LOAD and press <ENTER>,
then use the <UP/DOWN> buttons to highlight ST L or PR L, and press <ENTER>.
2.) Use the <UP/DOWN> buttons to highlight either YES or NO, then press <ENTER>.
3.) The ST L reset function will reset all default values with the exception of those in ADDR
(address), CTST (10 custom colors), and PROG (custom scenes and programs).
4.) The PR L reset function will only reset all customized program settings found in the PROG
settings (custom scenes and programs).
Data Sync Feature:
Users can transfer their custom settings from one xture to another via DMX.
1.) Disconnect xtures from any DMX controllers, and link them together via DMX in/out.
2.) On the sending xture (DMX out), navigate the main menu using the <UP/DOWN> buttons
to reach SEND, and press the <ENTER> button.
3.) Select YES, and press the <ENTER> button to begin the transfer.
4.) Information for ADDR (address) will not be sent.
5.) After the data has been transferred, the receiving xture will be automatically be reset.

Page 17
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
DMX Value In-Depth Reference Guide
Function Value What It Does
Dimmer 000 <--> 255 (0% <--> 100%)
Amber Intensity 000 <--> 255 (0% <--> 100%)
Warm White Intensity 000 <--> 255 (0% <--> 100%)
Cool White Intensity 000 <--> 255 (0% <--> 100%)
Strobe 000 <--> 005
006 <--> 020
021 <--> 060
061 <--> 100
101 <--> 140
141 <--> 180
181 <--> 220
221 <--> 255
No strobe
Non-synchronous strobe (slow <--> fast)
Synchronous strobe (slow <--> fast)
Electronic sine wave (slow <--> fast)
Random strobe (slow <--> fast)
Opening pulse (slow <--> fast)
Closing pulse (slow <--> fast)
Electronic square wave (slow <--> fast)
Effect 000 <--> 010
011 <--> 015
016 <--> 020
021 <--> 025
026 <--> 030
031 <--> 035
036 <--> 040
041 <--> 045
046 <--> 050
051 <--> 055
056 <--> 060
061 <--> 085
086 <--> 090
091 <--> 095
096 <--> 100
101 <--> 105
106 <--> 110
111 <--> 255
No Function
Custom color 1 (CT01 in menu settings)
Custom color 2 (CT02 in menu settings)
Custom color 3 (CT03 in menu settings)
Custom color 4 (CT04 in menu settings)
Custom color 5 (CT05 in menu settings)
Custom color 6 (CT06 in menu settings)
Custom color 7 (CT07 in menu settings)
Custom color 8 (CT08 in menu settings)
Custom color 9 (CT09 in menu settings)
Custom color 10 (CT10 in menu settings)
Reserved
Custom program 1 (CH01 in menu settings)
Custom program 2 (CH02 in menu settings)
Custom program 3 (CH03 in menu settings)
Sound active mode 1 (color change)
Sound active mode 2 (white strobe)
Reserved
Dimming Mode 000 <--> 010
011 <--> 020
021 <--> 030
031 <--> 040
041 <--> 050
051 <--> 060
061 <--> 070
071 <--> 080
081 <--> 090
091 <--> 255
Default (as set in the LED menu)
Linear curve
Square law curve
Inverse square law curve
S-curve
Linear curve (smooth)
Square law curve (smooth)
Inverse square law curve (smooth)
S-curve (smooth)
Default (as set in the LED menu)

Page 18
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
DMX In-Depth Reference: 7-Channel Modes
10-Channel Name
1Dimmer (0%<--> 100%)
2Amber Intansity (0%<--> 100%)
3Warm White Intensity (0%<--> 100%)
4Cool White Intensity (0%<--> 100%)
5 Strobe
6Effect
7 32-Bit Dimming Mode
DMX In-Depth Reference: 4-Channel Modes
4-Channel Name
1Dimmer (0%<--> 100%)
2Amber Intansity (0%<--> 100%)
3Warm White Intensity (0%<--> 100%)
4Cool White Intensity (0%<--> 100%)
DMX In-Depth Reference: 3-Channel Modes
3-Channel Name
1Amber Intansity (0%<--> 100%)
2Warm White Intensity (0%<--> 100%)
3Cool White Intensity (0%<--> 100%)

Page 19
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
5. APPENDIX
A Quick Lesson On DMX
DMX (aka DMX-512) was created in 1986 by the United States Institute for Theatre
Technology (USITT) as a standardized method for connecting lighting consoles to lighting
dimmer modules. It was revised in 1990 and again in 2000 to allow more exibility. The
Entertainment Services and Technology Association (ESTA) has since assumed control over
the DMX512 standard. It has also been approved and recognized for ANSI standard clas-
sication.
DMX covers (and is an abbreviation for) Digital MultipleXed signals. It is the most common
communications standard used by lighting and related stage equipment.
DMX provides up to 512 control “channels” per data link. Each of these channels was origi-
nally intended to control lamp dimmer levels. You can think of it as 512 faders on a lighting
console, connected to 512 light bulbs. Each slider’s position is sent over the data link as an
8-bit number having a value between 0 and 255. The value 0 corresponds to the light bulb
being completely off while 255 corresponds to the light bulb being fully on.
DMX data is transmitted at 250,000 bits per second using the RS-485 transmission stan-
dard over two wires. As with microphone cables, a grounded cable shield is used to prevent
interference with other signals.
There are ve pins on a DMX connector: a wire for ground (cable shield), two wires for
“Primary” communication which goes from a DMX source to a DMX receiver, and two wires
for a “Secondary” communication which goes from a DMX receiver back to a DMX source.
Generally, the “Secondary” channel is not used so data ows only from sources to receiv-
ers. Hence, most of us are most familiar with DMX-512 as being employer over typical
3-pin “mic cables,” although this does not conform to the dened standard.
DMX is connected using a daisy-chain conguration where the source connects to the input
of the rst device, the output of the rst device connects to the input of the next device,
and so on. The standard allows for up to 32 devices on a single DMX link.
Troubleshooting
Symptom Solution
Fixture Auto-Shut
Off
Check the fan in the xture. If it is stopped or moving slower than
normal, the unit may have shut itself off due to high heat. This is to
protect the xture from overheating. Clear the fan of obstructions,
or return the unit for service.
No Light Output Check to ensure xture is operating under correct mode, IE sound
active/auto/DMX/Etc., if applicable.
Chase Speed Too
Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power Check fuse, AC cord and circuit for malfunction.
Blown Fuse Check AC cord and circuit for damage, verify that moving parts are
not restricted and that unit’s ventilation is not obstructed
No Response to
Audio
Verify that the xture is in “Sound Active” mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not
Responding /
Responding Er-
ratically
Make sure all connectors are seated properly and securely.
Use Only DMX Cables and/or check cables for defects
Install a Terminator.
Reset xture(s).

Page 20
Colorise™ Inniwhite Manual Rev. A © 2015 Blizzard Lighting, LLC
Keeping Your Colorise™ Inniwhite As Good As New
The xture you’ve received is a rugged, tough piece of pro lighting equip-
ment, and as long as you take care of it, it will take care of you. That said, like
anything, you’ll need to take care of it if you want it to operate as designed.
You should absolutely keep the xture clean, especially if you are using it in an
environment with a lot of dust, fog, haze, wild animals, wild teenagers or spilled
drinks.
Cleaning the optics routinely with a suitable glass cleaner will greatly improve
the quality of light output. Keeping the fans free of dust and debris will keep
the xture running cool and prevent damage from overheating.
In transit, keep the xtures in cases. You wouldn’t throw a prized guitar,
drumset, or other piece of expensive gear into a gear trailer without a case,
and similarly, you shouldn’t even think about doing it with your shiny new light
xtures.
Common sense and taking care of your xtures will be the single biggest thing
you can do to keep them running at peak performance and let you worry about
designing a great light show, putting on a great concert, or maximizing your cli-
ent’s satisfaction and “wow factor.” That’s what it’s all about, after all!
Returns (Gasp!)
We’ve taken a lot of precautions to make sure you never even have to worry
about sending a defective unit back, or sending a unit in for service. But, like
any complex piece of equipment designed and built by humans, once in a while,
something doesn’t go as planned. If you nd yourself with a xture that isn’t
behaving like a good little xture should, you’ll need to obtain a Return Authori-
zation (RA).
Don’t worry, this is easy. Just send an email to [email protected],
and we’ll issue you an RA. Then, you’ll need to send the unit to us using a
trackable, pre-paid freight method. We suggest using USPS Priority or UPS.
Make sure you carefully pack the xture for transit, and whenever possible, use
the original box & packing for shipping.
When returning your xture for service, be sure to include the following:
1.) Your contact information (Name, Address, Phone Number, Email address).
2.) The RA# issued to you
3.) A brief description of the problem/symptoms.
We will, at our discretion, repair or replace the xture. Please remember that
any shipping damage which occurs in transit to us is the customer’s responsibil-
ity, so pack it well!
Shipping Issues
Damage incurred in shipping is the responsibility of the shipper, and
must be reported to the carrier immediately upon receipt of the items.
Claims must be made within seven (7) days of receipt.