BluDot Construct Bench Quick start guide

Construct Bench
DESIGNED IN 2016
ASSEMBLY NOTES | REV 00
@BLUDOT
We design all our pieces in our Minneapolis studio. Follow
along on Instagram for some sneak peeks into the process.
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.

1 | 844.425.8368 CONSTRUCT BENCH
Base
*Parts may vary depending on bench size purchased.
Seat Pad
1
1
QTY
QTY
Parts & Hardware

[e-mail] | 2ASSEMBLY NOTES
Step 01
PLACE SEAT PAD.
Place the seat pad onto the base as shown.
Turn adjustable glides at bottom of the
base clockwise or counterclockwise to
ensure that the bench is level prior to use.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Additional Information
METAL CARE
Clean metal base with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner
formulated for metal furniture. Wipe completely dry with a soft cloth.
FELT CARE
The seat pad is 100% German wool felt, a naturally renewable and recycleable material and because of
its wool properties, this product is not suitable for washer and dryer cleaning. If soiling should occur,
please spot clean with warm soapy water or dry clean.
AVOID
Keep upholstery & felt furniture out of direct sunlight and away from heat sources; excessive exposure
to sunlight may fade the color of the upholstery. Avoid placing heavy or sharp objects on the furniture
surface for long periods of time; this can cause permanent indentations in the fabric.