BluDot 11 Series Quick start guide

Series 11 6 Drawer Dresser
DESIGNED IN 2005
ASSEMBLY NOTES | REV 00
NEED A HAND?
Contact us at [email protected] or
844.425.8368 for assistance.
STASH YOUR SKIVVIES IN STYLE.
An elegant and refined approach with thin edges and thoughtful
proportions. Series Eleven. When ten just isn’t quite enough.

1 | 8 4 4 . 4 2 5 . 8 3 6 8 SERIES 11 6 DRAWER DRESSER
Side support Case
1 1QTY QTY
Headboard
2QTY
Pt. 8042
1QTY
Leg
2QTY
Pt. 3002
14QTY
Pt. 9001
1QTY
Pt. 9004
1QTY
Pt. 1217 Pt. 1218 Pt. 1053 Pt. 1052
2QTY 2QTY QTY 10QTY4
8042
Anti-tip Strap
8041
Anti-tip Bracket
Parts & Hardware

[e-mail] | 2ASSEMBLY NOTES
Step 01
ATTACH THE LEGS.
Attach legs to base using provided hardware
as shown.
Pt. 1053 x 4 Pt. 9001 x 1Pt. 3002 x 4

3 | 8 4 4 . 4 2 5 . 8 3 6 8 SERIES 11 6 DRAWER DRESSER
Pt. 1052 x 10 Pt. 3002 x 10 Pt. 9004 x 1
Step 02
ATTACH THE BASE.
After the base has been attached, have a
second person help lift and bring the case
upright in order to prevent leg damage.

[e-mail] | 4ASSEMBLY NOTES
Step 04
REINSTALLING THE DRAWER.
Pull both sides Forward. Engage rear slide
catches. Lower drawer front into place and
push closed.
Step 03
REMOVING THE DRAWER.
Extend the drawer completely. Squeeze both
locks on the underside of the drawer while
pulling the drawer out.

5 | 8 4 4 . 4 2 5 . 8 3 6 8 SERIES 11 6 DRAWER DRESSER
PT. 8041 X 1 PT. 1218 X 2
8041
Anti-tip Bracket
Step 05
ATTACH ANTI-TIP BRACKET TO
THE WALL.
Install anti-tip bracket to wall stud 1-inch
below case top panel height.
Side Panel
1” lower than
case top
Wall

[e-mail] | 6ASSEMBLY NOTES
PT. 1218 X 2
PT. 8041 X 1
8041
Anti-tip Bracket
Top
Back
Panel
Step 06
INSTALL ANTI-TIP BRACKET
TO CASE.
Bracket must be installed to top panel
of case. In order to prevent damage, it is
recommended that 3/32” pilot holes be
drilled prior to installation.
8041
Anti-tip Bracket

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner formulate
for wood furniture. Wipe completely dry with a soft cloth in the direction of the wood grain.
Step 07
SECURE THE CASE.
Install and tighten the strap
prior to using the product.
PT. 8042 X 1
8042
Anti-tip Strap