BluDot Post Up Bed Quick start guide

Post Up Bed
DESIGNED IN 2016
ASSEMBLY NOTES | REV 00
NEED A HAND?
Contact us at [email protected] or 844.425.8368 for assistance.

1 | 844.425.8368 POST UP BED
Pt. 5018
2QTY
Pt. 9016
1QTY
Pt. 9022
1QTY
5023
M8X1.25 X 77mm
RAIL BOLT
Pt. 1089
10*QTY
Pt. 5023
6QTY
Pt. 5019
2QTY
Front Upright Rear Upright
2 2QTY QTY
Headboard
1QTY
*Twin bed ships with x8 PT.1089.
Parts & Hardware

[e-mail] |2ASSEMBLY NOTES
Center Rail
1*QTY
Footboard
1QTY
Slats
2*QTY
Side Rail
2QTY
Upper Rear Rail
1QTY
Lower Rear Rail
1QTY
*Twin bed ships with x1 set of slats and no center rail.
Parts & Hardware

3 | 844.425.8368 POST UP BED
5023
M8X1.25 X 77mm
RAIL BOLT
PT. 5023 x 4
Step 01
BEGIN ASSEMBLING FRAME.
Attach PT. 5023 to front upright as shown.
Repeat for remaining front upright.
Step 02
ATTACH FOOTBOARD.
Attach the footboard as shown using
the pre-attached drop-in connectors.

[e-mail] |4ASSEMBLY NOTES
5023
M8X1.25 X 77mm
RAIL BOLT
PT. 5023 x 2PT. 5018 x 2
PT. 9016 x 1
PT. 1089 x 2
Step 03
SECURE FOOTBOARD.
Engage drop-in connectors by pulling down on
footboard while pushing up on front uprights.
Secure the connection by using the provided
hardware as shown.
Step 04
ATTACH HARDWARE TO REAR UPRIGHT.
Attach the provided hardware as
shown. Repeat for remaining rear
upright.
NOTE:Use a phillips screwdriver to
install PT. 5018.

5 | 844.425.8368 POST UP BED
PT. 9022 x 1
PT. 5019 x 2
PT. 5018
PT. 5019
Step 06
SECURE UPPER REAR RAIL.
1. Push uprights into place.
2. Turn PT. 5019 one half turn, 180˚, clockwise.
Step 05
BEGIN INSTALLING UPPER REAR RAIL.
1. Place rear uprights and upper rear rail on floor as shown.
2. Install PT. 5019 into the pre-drilled holes on the rail.
3. Align the arrow on PT. 5019 towards PT.5018.

[e-mail] |6ASSEMBLY NOTES
PT. 9016 x 1
PT. 1089 x 2
metal bracket
Step 07
ATTACH SIDE RAILS.
Attach the side rails as shown using
pre-attached drop-in connectors. Once
attached secure side rails using the
provided hardware.
NOTE: Pre-attached metal brackets
should be at headboard side of frame.

7 | 844.425.8368 POST UP BED
PT. 9016 x 1PT. 1089 x 2
Step 08
ATTACH FOOTBOARD ASSEMBLY.
With a second person, lift the side rails
and attach the footboard assembly using
the pre-attached drop in connectors. Once
attached, secure the side rails using the
provided hardware as shown.

[e-mail] |8ASSEMBLY NOTES
bolts
Step 09
ATTACH LOWER REAR RAIL.
Attach the lower rear rail using the
pre-attached metal connectors.
Tighten pre-attached bolts after rail
is in place.
Step 10
ATTACH HEADBOARD.
Attach headboard as shown using
the pre-attached metal cleats. Center
headboard after attchment.

9 | 844.425.8368 POST UP BED
Step 11
INSTALL CENTER RAIL.
Install center rail as shown using the
pre-attached metal connectors.
NOTE:Twin bed does not ship with a
center rail.
Step 12
INSTALL SLATS.
Starting at the headboard,
install slats as shown.

[e-mail] |10ASSEMBLY NOTES
PT. 9016 x 1PT. 1089 x 4*
Additional Information
CLEAN
Clean with a slightly damp, soft cloth. To remove dirt and fingerprints, use a quality cleaner formulate
for wood furniture. Wipe completely dry with a soft cloth in the direction of the wood grain.
Step 13
SECURE SLATS.
Secure slats as shown using the
provided hardware.
NOTE:Twin bed ships with one set of
slats and x2 fewer PT. 1089.

BLU DOT DESIGN & MANUFACTURING, INC. DESIGNED IN MINNEAPOLIS, MN