Bluetti EP600 User manual

EP600 Energy Storage System
App User Manual

EP600 ESS App
1
BLUETTI App
1. Introduction
BLUETTI App allows you to monitor and control the EP600 energy storage system
(ESS) in the palm of your hand via Bluetooth or WiFi, with features like Real-time
Alarm, Error Message, Data Collection, Operation Status, Parameter Configuration,
and Firmware Upgrade.
Note:
Supported operating systems: Android 8.0 or above, iOS 11.0 or above.
Bluetooth is available on your phone.
The router supports WiFi of IEEE 802.11 b/g/n, 2.4GHz.
BLUETTI recommends a router with WPA or WPA2_PSK encryption. EP600 ESS
doesn’t support enterprise encryption (commonly used on public WiFi networks that
require user authentication, like airport hot spots) and WEP and WPA TKIP
encryption.
Pictures shown below are for illustration only. Actual UI may vary.
2. Download
Scan the QR code below to download the BLUETTI App, or search for "BLUETTI"
in the App Store/Google Play.

EP600 ESS App
2
3. Registration
Click "Log in" on the home page to enter Login page, and then click "Register" to
create your BLUETTI account.
Note: If you do not see the email with verification code, check your "Junk mail"
folder or "Spam" folder. If you don’t find the email, there may be a delay and please
try "Get Code" again. Please contact the BLUETTI customer service if the code is
still unavailable.

EP600 ESS App
3
4. Login
Input your account details to log in.
Note: Please make sure BLUETTI App has access to your phone network.

EP600 ESS App
4
5. Bind & Unbind
Before binding or unbinding, please make sure that
BLUETTI App has access to your Bluetooth and location service (GPS).
You've enabled the Bluetooth and GPS on your phone.
EP600 ESS is in operation.
There are several ways to bind or unbind your EP600, choose an option below.
5.1 Bind
1: If you haven't registered your EP600 ESS yet, the App will automatically search for
nearby Bluetooth devices when you enter the My BLUETTI page. Select your EP600
ESS in the pop-up and bind.

EP600 ESS App
5
2: Click "+" to search for nearby Bluetooth devices. Select your EP600 ESS in the
available device list and bind.

EP600 ESS App
6
3: Click " " to scan your EP600 QR code.
Note: The QR code is printed on the side of EP600.

EP600 ESS App
7
4: Click "+" and "Add Manually". Fill in your device Serial Number (SN) and
BLUETTI account to bind.
Note: The device SN is located below the QR code.

EP600 ESS App
8
5.2 Unbind
1: In the BLUETTI device list, long press the device you want to unbind (Android) or
swipe left (iOS), and click "Delete" to unbind.
2: Connect to EP600 ESS via Bluetooth, click " " to enter the Settings page, and
click "Unbind".

EP600 ESS App
9
Note:
Your BLUETTI EP600 ESS can be bound to one account ONLY, while can be shared
with multiple accounts (see EP600 ESS Sharing for details).
A BLUETTI account can be bound to multiple BLUETTI energy storage systems.

EP600 ESS App
10
6. Connection
6.1 Bluetooth
1: If you’ve logged into your BLUETTI account, which is associated with the EP600
ESS you want to connect, click " " on My BLUETTI page.
2: If you haven't registered an account, click " " on home page for Bluetooth
Direct Access.

EP600 ESS App
11
6.2 WiFi
6.2.1 WiFi Configuration
1: After successfully binding your EP600 ESS, set up the WiFi network.

EP600 ESS App
12
2: When your EP600 ESS's network is " " or " ", click the icon to set up the
network.
3: In the case of Bluetooth Direct Access, click " " to enter the Settings page and
then set up the network.

EP600 ESS App
13
6.2.2 WiFi Connection
In the BLUETTI device list, click on the area as shown below and the App will
connect to your EP600 ESS via WiFi. As long as your phone has internet access,
you’re able to control your EP600 ESS anytime, anywhere.

EP600 ESS App
14
Note: The IoT controller supports 2.4GHz WiFi ONLY.
7. EP600 ESS Sharing
Before you share EP600 ESS to your family or friends, please make sure:
You’ve logged into your account bound to EP600 ESS.
They have their own BLUETTI accounts.
Connect to your EP600S ESS via Bluetooth or WiFi, click the " " in the upper right
corner of the real-time operation page and enter the Settings page. Click "Share
Device" to generate a QR code.
Login the account your EP600 ESS will be shared with, click " " to scan the
generated QR code.

EP600 ESS App
15
Note: The QR code will expire in 10 minutes.
8. Inverter Status
Once connected to EP600 ESS, you’ll enter the real-time operation page which offers
you an overview of your power consumption. You can turn ON/OFF the device, AC
and DC inputs/outputs, and much more by clicking corresponding buttons.

EP600 ESS App
16

EP600 ESS App
17
8.1 Inverter Alarm
Current Alarm
Alarm History

EP600 ESS App
18
8.2 Power Consumption

EP600 ESS App
19
9. Battery Pack Status
10. Settings
10.1 SOC Setting
Battery SOC Low: When the remaining battery capacity is lower than this value, the
load will be powered by the grid in bypass mode. Setting it at 0 may cause the failure
of bypass function.
Battery SOC High: When its battery capacity reaches this value, EP600 will be
recharged via PV instead of the grid.