Bluetti X30 User manual

X30
Portable Power Bank
User Manual
Please read this manual carefully before use and keep it for future reference.

Thank You!
Thank you for making BLUETTI a part of your family.
From the very beginning, BLUETTI has tried to stay true to a sustainable future
through green energy storage solutions for both indoor and outdoor use while
delivering an exceptional eco-friendly experience for our homes and our world.
That's why BLUETTI makes its presence in 70+ countries and is trusted by
millions of customers across the globe.
Franch
Germany
Netherlands

Copyright © BLUETTI Corporation. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any
means without the prior written consent of BLUETTI Corporation.
Trademark Declaration
is a trademark of BLUETTI Corporation.
All other trademarks mentioned in this manual are owned by the trademark owners.
Notice
BLUETTI's products, services, and features are subject to the agreed-upon terms
and conditions during purchase. Please note that some products, services, or
features described in this manual may not be available under your purchase
contract. Unless otherwise specified in the contract, BLUETTI makes no repre-
sentations or warranties of any kind, express or implied, with respect to the
contents of this manual.
The contents of this manual are subject to change without notice. Please get the
latest version from: https://www.bluettipower.com/pages/user-guides
If you have any questions or concerns about this manual, please contact BLUETTI
support for further assistance.
SHENZHEN POWEROAK NEWENER CO., LTD.
Address: F19, BLD No.1, Kaidaer, Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen,
China
Website: https://www.bluettipower.com
Customer Service
Tel: [phone] (Monday to Sunday 9:00-17:00)
Email: [e-mail] (Pre-sales),
[e-mail] (After-sales)

Contents
Safety Instructions
General Safety
Storage and Usage
What’s In The Box
Product Overview
LCD Screen
Operations
Powering On/Off
Charging
Discharging
Set Battery Protection Mode
Specifications
Abbreviations
1
1.1
1.2
2
3
4
5
5.1
5.2
5.3
5.4
6
7
06
06
07
08
10
11
12
12
12
12
13
14
14

1. Safety Instructions
Read this manual for instructions on the proper use and safety information for the unit.
Follow the warnings and instructions marked on the unit and its accessories.
Pay attentionto the "Instruction", "Caution", "Warning" and "Danger" symbols in this
manual, and follow theinstructions carefully to avoid injury or damage. For operations
not covered in the manual, please contact our company if necessary. BLUETTI will not be
responsible for unauthorized operations.
The Safety Requirements provided herein are for illustrative purposes that include but
are not limited to those listed in this manual. Actual operation shall comply with all
applicable safety standards.
1.1. General Safety
• Always operate or store the unit in the conditions specified in this manual.
• The installation and ambient conditions must comply with the regulations in the
relevant international, national or regional standards.
• Unauthorized disassembly, alteration of the equipment or modification of the software
code is not allowed.
BLUETTI shall not be liable for the following circumstances:
• Equipment damage caused by force majeure, such as earthquake, fire, storm, flood,
mudslide, etc.
• Damage or loss during customer's own transportation.
• Damage caused by storage conditions that do not meet the requirements specified in
this manual.
• Damage to the hardware or data of the equipment due to customer negligence,
improper operation or intentional damage.
• Damage to the system caused by a third party or the customer, including handling and
installation that does not meet the requirements specified in this manual.
• Damage caused by adjustment, alteration or removal of identification marks.
Regulate your operations to avoid danger:
• Do not install, use and maintain the unit in adverse weather conditions such as
lightning, rain, snow and strong breezes (including but not limited to handling and
operating the unit, plugging and unplugging signal connections to outdoor facilities,
working at height, outdoor installations, etc.).
• Always turn off the power sourcebeforestartingany electrical work.
• Do not clean the unit with water.
• Do not disassemble,modify, tamper with or repairthe unit on your own.
• Regularly inspect the unit and its accessories for damage or deterioration.
• If the unit’s enclosure is cracked during transportation or use, do not use it and contact
BLUETTI support or your local BLUETTI dealers.
• Use a dry powder extinguisher if the unit catches fire.
JUST POWER ON06

1.2. Storage and usage
• When not using the unit for over 3 months, charge it to 40% to 60% SoC to keep it in
optimal condition.
• Store the unit in a cool and dry place. The ideal temperature range is 100C to 300C. The unit
can be safely charged and discharged at temperatures of -200C to 400C. However, it’s NOT
recommended to store the unit in harsh temperatures for extended periods of time.
• Fully cycle the unit every 3 months to maintain the battery’s health.
• Clean the unit with a soft dry cloth.
• Before storing the unit, power it off and remove all electrical connections from it.
If the SoC drops to 0 (during operation or upon startup), take the following
actions to safely restart the unit:
1)Shut down immediately.
2)Charging within 48 hours.
3)Battery should be kept at an ambient temperature of 50C to 350C for 24 hours before
charging.
BLUETTI shall not be liable for any equipment damage caused by the violation of above
instructions.
• The transportation, wiring and maintenance shall comply with all applicable laws,
regulations and standards.
• User-provided materials and tools required shall meet the requirements specified in
applicable laws, regulations and relevant standards.
• In case of fire, EVACUATE the building or affected area immediately, activate the closest
FIRE ALARM system and CALL 9-1-1 or your local emergency phone number.
• Use genuine cables and accessories provided by BLUETTI.
• Keep the unit away from heat sources or high temperatures, and do not expose it to
direct sunlight.
• Do not store the unit with flammable liquids, gases, or explosive materials.
• Make sure the area where you are using the unit is well ventilated and spacious.
• Do not block or cover the vents of the unit as this may cause irreversible damage to it.
• Use the unit for its intended purpose and avoid stacking objects on top of it during
storage or use.
• Do not move the unit during operation as the vibrations and shocks associated with
movement may cause damage to the internal hardware.
• In case of malfunction, turn off the unit immediately and contact BLUETTI support or
your local BLUETTI dealers if this manual cannot adequately explain the malfunction to you.
• Do not place the unit on an unstable or inclined surface.
• Do not insert foreign objects into any port and vent of the unit.
• Keep away from children and pets.
Legal and Regulatory Requirements
JUST POWER ON 07

ItemNo. Picture Qty.
Portable Power Bank 1
DC 12V/5A Power Cable (Ⅱ)
DC 12V/5A Power Cable (Ⅰ)
DC 24V/4A Power Cable
DC 24V/4A Power Cable
DC 24V/4A Power Cable
1
1
1
1
1
1
1
2. What’s In The Box
Standard Packaging
1
2
3
4
5
Connector for HP
(Connecting with together
to power AirSense 10)
5
Connecting Adaptor
(Connecting with (tagged end) to
power DC15V Transcend Mini)
5
6
7
8
JUST POWER ON08

User Manual
1
Storage Bag
AC Adaptor
1
1
9
10
11
ItemNo. Picture Qty.
Standard Packaging
X30
Portable Power Station
User Manual
Pleasereadthis manual carefully before use and keep it for future reference.
JUST POWER ON 09

3. Product Overview
X30 is a DC portable power bank with an internal integrated large capacity battery pack.
With external adapter charging, LCD display, USB-A and 12V/15V/24V DC output, it is
suitable for CPAP power supply and mobile phone charging. Refer to 6. Specifications
for more details of X30.
The keys and interfaces of X30 are shown in Figure 3-1.
LCD Screen
Power Button
DC Button
Charging Port
USB-A Output
DC Output (24V)
DC Output (15V)
DC Output (12V)
Enable/disable the DC output.
Charge X30 through this port.
With DC 5V/2.5A output.
Power devices with DC 24V input.
Power devices with DC 15V input.
Power devices with DC 12V input.
Displays operation information
e.g. SoC and charging/discharging status.
Press and hold it for 3 seconds
to power on/off X30.
DescriptionNameNo.
2
5
4
3
1
6
7
8
Figure 3-1 Keys and Interfaces of X30
Table 3-1 Descriptions of Keys and Interfaces
1
2
3
4
5
6
7
8
JUST POWER ON10