BMC G3 A20 User manual

G3 A20／G3 C20 Quick Operation Manual V1.0
1 / 2
G3 A20／G3 C20 Quick Operation Manual
1. Button Functions
Home Button：Return to the previous menu or main interface
Knob: Start treatment and adjust device settings
Start / Stop Button：Start / Stop delivering air
2. Setting up the Device
3
4
12
5
Mask Tube
Main Device
Power Cord
Power Outlet
Power Adapter

①
②
③
④
①：Heated Tubing Port
②：Air Outlet
③：DC Inlet
④：Filter Cap (Air Inlet)
A. Connect one end of the tube to the assembled mask.
B. Connect one end of the tube to the air outlet of the device, as shown in the figure above.
Connect the heated tube joint to the air outlet of the device, and then insert the power plug into
the heated tubing port on the back of the device.
C. Connect the power adapter to the DC inlet of the main device.
D. Connect the power cord to the power adapter.
E. Plug the power cord into the power outlet.
3. Adjusting Device Settings
A. When the device is powered on, the display screen will display the Main Interface, as shown in
the left figure below. If the heated tube is connected correctly, the icon will become a number
in the Main Interface on the screen of the device, as shown in the right figure below.

G3 A20／G3 C20 Quick Operation Manual V1.0
2 / 2
B. Press the Knob to access the Initial Setup Interface of the Patient Menu, as shown in the
figure below.
C. Press the Knob to access the Setup Interface, as shown in the figure below.
D. Turn the Knob to adjust an option.
E. Press the Knob to confirm your adjustment to the option.
F. The cursor switches among the options as you turn the Knob ,as shown in the figure
below. Refer to steps C-E to adjust other options. Press the Home Button to exit the
Setup Interface.
4. Starting Treatment
After you finish adjusting device settings and return to the Main Interface, press the Start / Stop
Button to start treatment.