BMC OratectXP User manual

OratectXP®Reference Guide
*OratectXP®is for forensic use only
Rev: B,
OXRG02
Blue
Line
Test
Window
The OratectXP®* Oral Fluid Drug Screen Device is a simple one-step test for the detection of drugs of abuse in oral fluid.
OratectXP®Procedures -- Refer to package insert for detailed instructions and technical information.
1. Remove the blue cap by holding
the sides and pulling gently. This
will expose the collection pad.
Make sure there is a blue line
present in the window area
indicating an unused device.
2. Open mouth and gently rub the
collection pad inside mouth against
cheek in a circular motion several
(approximately 15-20) times. Make
sure to keep head level.
3. Gently rub the collection pad
against the opposite cheek in
circular motion several
(approximately 15-20) times.
4. Gently rub the collection pad on
top of the tongue several
(approximately 15-20) times. Do
not chew, suck, bite or bend the
collection pad.
5. Rub the collection pad underneath
the tongue several (approximately
15-20) times.
6. Place the collection pad underneath
the tongue for approximately 30
seconds to collect saliva. Instruct the
donor to hold the device in place with
hand. Sufficient amount of saliva
collected is indicated by the flow
of the blue line. Repeat steps 2-6
until the blue line flow.
7. Remove from mouth as soon as
the blue line flow at the test
window. Re-cap the device.
8. Lay the device on a flat surface
and read results in 3 minutes
after removing the device from
mouth. See Package Insert.
Interpreting OratectXP®Test Results
Invalid Result
When no colored band appears in the
CONTROL (C) region, the test is
invalid even if there is a band in the
test region. Repeat the test with a new
device.
Negative Result
Colored bands should be observed:
One in the CONTROL (C) region
One in the specific TEST region
The color of the test band may be
slightly darker or lighter than the control
band. Any visible band that can be seen
is a negative result.
Presumptive Positive Result
A colored band at the CONTROL (C)
region should be observed. When
there is no colored band at the
specific TEST region, the test is
presumptive positive for that particular
drug.
Example Interpretation:
Example Interpretation:
Example Interpretation:
OPI:
Invalid
MET:
Invalid
THC:
Invalid
COC:
Invalid
OPI:
Negative
MET:
Negative
THC:
Negative
COC:
Negative
OPI:
Negative
MET:
Presumptive
Positive
THC:
Negative
COC:
Negative