Body Clock Stimplus User manual

Stimplus and Stimplus Pro
Instructions or use
TM TM
Caution: Federal Law restricts this device to sale or use by or on
the order o a practitioner so licensed by the State.

Contents
Introduction to Patient
and Professional ..................................2
Unique Features ....................................3
How to Use the Body Clock Stimplus ..3
Controls and Indicators ........................6
Technical Data........................................7
How to Use the Body Clock
Stimplus Pro..........................................8
Controls and Indicators ........................11
Technical Data ......................................12
Contraindications ................................13
Warnings ..............................................13
Precautions ..........................................14
Adverse Reactions................................14
Skin Preparation ..................................14
Electrode Placement (Gold Tip) ..........15
aintenance and Care ........................15
Checking System Performance and
Trouble Shooting..................................15
Battery Replacement............................16
Device Failures ....................................16
Introduction to Patient
and Professional
The Body Clock Stimplus and Stimplus
Pro units are designed for the treatment
of symptomatic relief and management
of chronic intractable pain and/or as an
adjunctive treatment in the
management of post-surgical and post-
traumatic acute pain.
The instructions in this manual are
designed to cover most operational
issues. However if you have any
questions about your particular
condition or if problems arise, please
seek advice from your physician or
therapist.
2

3
Unique Features
• Audio and visual (LED) intensity
indicator.
• 6 intensity levels indicated by 6
LED’s.
• 3 choices of stimulation rhythm.
• Timer to adjust treatment duration.
• Stimulates through micro current
therapy.
• Ear-phone jack to stimulate in
silence.
• Free precision extension tip
(with the Stimplus Pro only)
• Ergonomic design
• Compact, light and user friendly.
How to Use the
Body Clock Stimplus
1. Activate the Body Clock Stimplus by
turning the power switch on.
2. PLEASE NOTE that the device must
be held by the person being treated,
as the passive contact plate acts as
one end of a circuit, the other being
the tip of the device, which is applied
to the desired point. When treating
another party, the operator should
hold the device onto the points to be
treated, and ensure that physical
contact is maintained between the
operator and the other party in order
to complete a circuit. (below).
Alternatively, a wrist strap (which is
not included with this unit and may

be purchased separately) may be
used to the same effect. The wrist
strap consists of a lead with the wrist
strap at one end and a jack plug at
the other end. If the strap is used,
the jack plug should be inserted into
the jack on the underside of the
device. The wrist strap should then
be worn by the other party. There is
then no need for physical contact to
be maintained between the operator
and the other party. Stimulation may
then be commenced.
3. Begin stimulation by selecting the
desired stimulation time by setting
the time selector switch. A preset
time of 30 or 60 seconds may be
selected or alternatively manual
stimulation, which lasts as long as
you choose.
4. If a preset stimulation time is
chosen, just press the stimulation
button briefly and release. The
device will automatically stop
stimulating when the preset time is
over. If manual stimulation is
selected, the device will stimulate for
as long as you press the stimulation
button.
5. When the unit is switched off, the
intensity level will automatically be
reset to minimum. You can see the
previous intensity setting by pressing
the intensity button, after which, the
previous intensity will appear for 5
seconds in the 6 LED bar scale. You
can then increase or decrease that
4

5
preset intensity level before
beginning stimulation.
6. You may select one of three rhythm
options during stimulation:
continuous, 1Hz or 4Hz. You can
select the rhythm that provides the
best level of comfort.
7. When you begin the stimulation, the
beeper sound will stop and the green
light will flash, indicating that
stimulation has begun.
8. Using the intensity control switch
you can adjust the intensity to a
comfortable level pressing the "+" or
"-" keys to either increase or
decrease intensity. The intensity
level will be indicated by the LED
scale. If the LED nearest to the tip is
flashing, the unit is set at minimum
intensity. If the LED furthest from the
tip is flashing, the unit is set at
maximum intensity.
9. Once stimulation is over, the device
switches back to search mode and
the beeper sound will be audible
again.
10.During stimulation you may feel the
electric current at the stimulation
site.
11. The ear piece included with this unit
may be used to mute the beeper
sound enabling the user solely to
hear this sound. This piece consists
of a lead with a jack plug at one end
and the ear piece at the other end. To
activate the ear piece, insert the jack
plug into the earphone jack. The ear
piece is now ready for use.

6
Stimplus Controls and indicators

7
Stimplus Technical Data
IN TYP AX
Operating Voltage 4.5V 6.0V 6.5V
Output Intensity (500 ohms) 0mA - 1.2mA
Output Waveform Asymmetrical Biphasic rectangular
Stimulation Pulse Rate 13 Hz 16 Hz 19Hz
Pulse Width - 0.15ms -
Low Battery Indication 4.1V - 4.9V
Battery Life (30 sec/cycle) 3800 cycles --
Power Source Powered by 2 Lithium 3 volt batteries (included)
Weight (grams) 43.5g
Dimensions 16.5cm x 3.7cm x 1.3cm (6 1/2” x 1 7/16” x 9/16”)
Classification This unit is fully compliant with EEC Directive
93/42/EEC, and is classified as internally powered
equipment, Type BF. It is intended for continuous
operation.
Explanation of Symbols BF Isolated applied part
Warning – refer to accompanying documents
(i.e. this user manual)
Storage Temperature Range -5˚C – 65˚C
Storage Relative Humidity Up to 80%

The radio shielding of the device has
been ascertained according to VFG
243/1991 (interference suppression of
IS devices).
Shapes of output curves under a 500 ohm load
How to Use the
Body Clock Stimplus Pro
1. Activate the Body Clock Stimplus Pro
by turning the power switch on.
2. PLEASE NOTE that the device must
be held by the person being treated,
as the passive contact plate acts as
one end of a circuit, the other being
the tip of the device, which is
applied to the desired point. When
treating another party, the operator
should hold the device onto the
points to be treated, and ensure that
physical contact is maintained
between the operator and the other
party in order to complete a circuit.
(See right). Alternatively, the wrist
strap included with this unit may be
used to the same effect. The wrist
strap consists of a lead with the
wrist strap at one end and a jack
plug at the other end. If the strap is
8

9
used, the jack plug should be
inserted into the jack on the
underside of the device. The wrist
strap should then be worn by the
other party. There is then no need
for physical contact to be
maintained between the operator
and the other party. Stimulation
may then be commenced.
3. Begin stimulation by selecting the
desired stimulation time by setting
the time selector switch. A preset
time of 15 or 30 seconds may be
selected or alternatively manual
stimulation, which lasts as long as
you choose.
4. If a preset stimulation time is
chosen, just press the stimulation
button briefly and release. The
device will automatically stop
stimulating when the preset time is
over. If manual stimulation is
selected, the device will stimulate
for as long as you press the
stimulation button.
5. When the unit is switched off, the
intensity level will automatically be
reset to minimum. You can see the
previous intensity setting by
pressing the intensity button, after
which, the previous intensity will
appear for 5 seconds in the 6 LED
bar scale. You can then increase or
decrease that preset intensity level
before beginning stimulation.
6. You may select one of three
frequencies during stimulation: 5Hz,
10Hz or 20Hz. You can select the

frequency that provides the best level
of comfort.
7. When you begin the stimulation, the
beeper sound will stop and the green
light will flash, indicating that
stimulation has begun.
8. Using the intensity control switch you
can adjust the intensity to a
comfortable level pressing the "+" or
"-" keys to either increase or
decrease intensity. The intensity level
will be indicated by the LED scale. If
the LED nearest to the tip is flashing,
the unit is set at minimum intensity. If
the LED furthest from the tip is
flashing, the unit is set at maximum
intensity.
9. Once stimulation is over, the device
switches back to search mode and the
beeper sound will be audible again.
10. During stimulation you may feel the
electric current at the stimulation site.
11. The ear piece included with this unit
may be used to mute the beeper
sound enabling the user solely to hear
this sound. This piece consists of a
lead with a jack plug at one end and
the ear piece at the other end. To
activate the ear piece, insert the jack
plug into the earphone jack. The ear
piece is now ready for use.
12. A precision extension tip is also
provided, which can extend the tip (+)
to assist you where an acupoint is
difficult to reach. This is simply placed
over the tip and is then ready for use.
10

Stimplus Pro Controls and indicators
11

12
Stimplus Pro Technical Data
IN TYP AX
Operating Voltage 4.5V 6.0V 6.5V
Output Intensity (500 ohms) 190uA - 1.15mA
Output Waveform Asymmetrical Biphasic rectangular
Stimulation Pulse Rate 5 Hz 10 Hz 20Hz
Pulse Width - 0.15ms -
Low Battery Indication 4.1V 4.5V 4.9V
Battery Life (30 sec/cycle) - 8800 cycles --
Power Source Powered by 2 Lithium 3 volt batteries (included)
Weight (grams) 43.5g
Dimensions 16.5cm x 3.7cm x 1.3cm (6 1/2” x 1 7/16” x 9/16”)
Classification This unit is fully compliant with EEC Directive
93/42/EEC, and is classified as internally powered
equipment, Type BF. It is intended for continuous
operation.
Explanation of Symbols BF Isolated applied part
Warning – refer to accompanying documents
(i.e. this user manual)
Storage Temperature Range -5˚C – 65˚C
Storage Relative Humidity Up to 80%

The radio shielding of the device has
been ascertained according to VFG
243/1991 (interference suppression of
IS devices).
Shapes of output curves under a 500 ohm load
Contraindications
1. This device should not be used
around the Carotid sinus (neck)
region or the orbits of the eyes.
2. Any use of this device on patients
who have a demand-type cardiac
pacemaker.
3. Do not use this device transcere-
brally (i.e. when treating another
individual, do not make a circuit by
placing the device and your spare
hand on their head).
4. The use of TENS whenever pain
syndromes are undiagnosed, until
etiology is established.
Warnings
1. The safety of TENS devices for use
during pregnancy or birth has not
been established.
2. TENS is not effective for pain of
13

14
central origin.
3. TENS devices should be used only
under the continued supervision of a
physician.
4. TENS devices have no curative value.
5. TENS is a symptomatic treatment
and as such suppresses the
sensation of pain, which would
otherwise serve as a protective
mechanism.
6. The user must keep this device out
of the reach of children.
7. Electronic monitoring equipment
(such as ECG monitors and ECG
alarms may not operate properly
when TENS stimulation is in use.
Precautions
1. Isolated cases of skin irritation may
occur at the site of electrode (gold-
tip) placement following long term
application.
2. Effectiveness is highly dependent
upon patient selection by a person
qualified in the management of pain
patients.
Adverse Reactions
Skin Irritation and contact burns can
occur if the device is used in a constant
and continuing stimulation pattern.
Therefore be very careful as to the
condition of the skin beneath the main
contact point.
Skin Preparation
Prepare the skin before using the Body
Clock Stimplus or Stimplus Pro by
thoroughly washing the skin with a mild
soap and water solution where contact
will be made. This will remove non-
conducting skin oils. Then rinse the area
with warm water and dry thoroughly.

Electrode Placement (Gold tip)
For reducing the pain, place the gold tip
on or above the point of pain.
Maintenance and Care
Guidelines for optimum performance:
• Change the battery regularly.
• The unit must be switched off when
changing the battery.
• The unit should be wiped clean
periodically using a very slightly
dampened cloth. A mild soap may
be used but DO NOT apply solvents.
General Precautions:
• Do not immerse your Body Clock
Stimplus or Stimplus Pro in water or
any other liquid
• Do not place the device close to any
source of excess heat
• Do not operate the device in the
presence of flammable gases
• Do not attempt to open the Body
Clock Stimplus or Stimplus Pro unit
• Do not use battery or power sources
other than those specified
• Do not drop this unit onto a hard
surface
Checking system performance and
trou le shooting
• If the “red” LED lamp illuminates
when the power switch is turned on,
turn the device off. Then replace the
two three (3) volt batteries and turn
the device on again. If it still does
not function, return the device for
repair.
15

• If your unit does not appear to be
operating properly, first change the
battery. Replacing the battery can
eliminate most operational
problems. If the device still does not
appear to function properly, return
the device for repair.
• If the “green” LED lamp does not
illuminate when the stimulation
switch is pressed, return the device
for repair.
Battery Replacement
When replacing the batteries, ensure
that the power switch is turned off. Then
remove the battery compartment cover,
and take out the two lithium three (3)
volt batteries and replace them with two
new two lithium three (3) volt batteries.
Then replace the battery compartment
cover.
Device failures
• Please do not attempt to repair
damaged devices yourself.
• In case of further inquiries, always
state the model of your device (as
indicated on the back of the unit).
• Body Clock TENS should be repaired
by qualified technical personnel.
• Body Clock TENS units are
guaranteed for a period of 5 years
against manufacturer’s defects.
• Note: the guarantee is null and void
if any attempt is made to open the
unit by unauthorized personnel.
• In the event of a fault please contact
the supplier (address found on the
invoice or delivery note) or
Body Clock, 108 George Lane,
South Woodford, E18 1AD.
Tel: [phone]
Fax: [phone]
email: [e-mail]
16

Guarantee
Your TENS machine is guaranteed for a period of 5 years against
manufacturer’s defects. Please record purchase details in the
space provided below for your record purposes.
The guarantee does not include leads, electrodes or battery
Name of product: Stimplus / Stimplus Pro
Date of purchase:
Invoice number:
17

18

19

0120
November 2013 (2)
Body Clock Health Care Limited
108 George Lane,
South Wood ord,
London, E18 1AD,
England
Tel (+44) (0)20 8532 9595
Fax (+44) (0)20 8532 9551
www.bodyclock.co.uk
e-mail [email protected]
ISO 9001:2008 ISO 13485:2003
EC DIRECTIVE 93/42/EEC Annex V
This manual is recyclable