Body Craft Dip Station F415 User manual

ASSEMBLY INSTRUCTION MANUAL
MODEL: F41S DIP STATIO
313
~
323
."
o
w
".
"j)
312
'"
•
322
I , I ,
311
PARTS CHART
!.':NO::,.~D~E~S:::C!::R!,,'P:,:T,:,:'O,:,:N,::- __ ---,Q..,TY+,' ~~\ ======'9""< "",,,,,,,. ~< .
301 UPRIGHT FRAME 1 301 302
302 MIGHT SUPPORT 1
311 1-114" ROUND PLUG 2
312 50 SQ. END PLUG 2
313 HAND GRIP 2
321 112" X3" HEX HEAD BOLT 3A
322 112" NYLON NUT 3"-
323 112" wo.SHER 6 321
W",I,!,I,!,I--'-7,LW ,
o 114 1/2 3/4 ,~ 1/2 r' 112 ,-;;- t/2 .. ~
(Inoh)
The Dip attachment can attach to either side of the F410 Linear Smith.
1. Removed the two 8011$(20) attaching side Base Frame{l or 2) to the Rear Stabilizer
(3). Discard
the Connect Plate(14).
Attach Upright frame(301) to Base Frame(1) and tighten Bolts(20), Washer(27) and
Nut(29) again.
2.Atlach weight Support(302) onto Upright Frame(301). tighten three Bolls(321), six
Washers(322) and three Nub(323).
3. VIet Hand Gr1J(313) and slide into the ~ Support(302).
".Attach Round P1ug(311) and End ClIf'{312) onto weight $upport(302).
'"
3" 302
•
""
Thank you for purcbasing the Bodycraft Smith Attachment Strength Training
System.
If You have any questions, please call your local BodyCraft dealer
or call our customer service de artment at 801)..990-5556.