Body Craft F602 User manual

Questions?
As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or
find missing or damaged parts, we will guarantee your complete satisfaction through our authorized
dealer service centers or our home office customer service department. Please call your local dealer for
assistance or RSI at 800-990-5556 (9:00 AM - 5:00 PM). Our trained techanicians will provide immediate
assistance to you, free of charge.
We stand behind our products. Every piece, every part of this BODYCRAFT strength training system is
guranteed for as long as you own it. We will repair or replace anything that goes wrong.
Bodycraft is a division of Recreation Supply Inc.
P. O. Box 181
Sunbury, OH 43074
FLAT / INCLINE / DECLINE BENCH
INSTRUCTION MANUAL
MODEL: F602

1
BEFORE YOU BEGIN
Congratulations and thank you for selecting the BODYCRAFT FLAT / INCLINE /
DECLINE BENCH strength training system. The BODYCRAFT FLAT / INCLINE
/ DECLINE BENCH offers an impressive array of strength training exercises to
develop every major muscle group of the body. Whether your goal is cardiovascular
fitness, a shapely, toned body or dramatic muscle size and strength, the
BODYCRAFT FLAT / INCLINE / DECLINE BENCH will help you achieve the
specific results you want.
For your safety and benefit, read this manual and the accompanying literature
before using the BODYCRAFT FLAT / INCLINE / DECLINE BENCH. Keep
this manual for future reference. If you have additional questions, please call your
local BODYCRAFT dealer or our customer service department at 800-990-5556
Monday through Friday, 9 a.m. until 5 p.m. Eastern Time.
IMPORTANT SAFETY NOTES
There is a risk assumed by individuals who use this type of equipment.
Before beginning this or any other exercise program consult your physician.
This is especially important for individuals over the age of 35 or persons
with pre-existing health problems. Recreation Supply, Inc. assumes no
responsibility for personal injury or property damage sustained by or
through use of this product.
1.This product must be assembled on a flat, level surface to assure its
proper function.
2.Clean pads and frame on a regular basis. We recommend warm,
soapy water. Do not use harsh or abrasive chemicals.
3.Inspect and tighten all parts before every use. Replace any worn
parts immediately. Failure to do so may result in serious injury.
4.Keep children away from the BODYCRAFT FLAT / INCLINE / DECLINE
BENCH at all times.
5.Keep your hands away from moving parts other than the designated
handles.
6.When adjusting the seat, make sure the spring pin is fully engaged.
If not, the seat may slip and cause serious injury.
7.Exercise with care to avoid injury.
8.If unsure about the proper use of the BODYCRAFT FLAT / INCLINE /
DECLINE BENCH strength training system call your local BODYCRAFT
dealer or our customer service department at 800-990-5556.

(59) (60) (61)
2
PARTS CHART
0
(inch) 1" 2" 3"1/21/4 3/4 1/2 1/2 4" 5" 6"1/2 1/2 1/2
(1) (2) (3)
(4) (5) (6)
(7) (8) (9) (10)
(21) (22) (24) (25)(23)
(31) (32) (33)
(51) (52) (53)
(41) (42) (43) (44)
(54) (55) (56) (57)
(58)
NO. DESCRIPTION QTY.
NO. DESCRIPTION QTY.
NO. DESCRIPTION QTY.
NO. DESCRIPTION QTY.
NO. DESCRIPTION QTY.
1
2
3
4
5
6
7
8
9
10
1
1
1
1
1
1
2
1
1
1
MAIN FRAME
FRONT STABILIZER
REAR STABILIZER
BACK SUPPORT
SEAT ADJUSTER
KNEE HOLDER
BACK ADJUSTER
FOAM PAD HOLDER
BRACE
KNEE HOLDER DOWN
4
1
2
2
2
75 X 45 RECT. END CAP
50 SQ. SPACER
45 X 75 RECT. END PLUG
50 SQ. END PLUG
1" ROUND PLUG
1
1
2
BACK PAD
SEAT PAD
FOAM PAD
1
1
1
6
QUICK RELEASE
POP PIN
KNOB
BUSHING
3
1
6
4
12
4
9
1
2
2
2
1/2" X 5" HEX HEAD BOLT
1/2" X 4" HEX HEAD BOLT
1/2" X 3" HEX HEAD BOLT
3/8" X 2-3/4" HEX HEAD BOLT
1/2" FLAT WASHER
3/8" FLAT WASHER
1/2" NYLON NUT
1/2" NYLON NUT(THINNER)
WHEEL
5/16" X 1-1/2" HEX HEAD BOLT
5/16" NYLON NUT
21
22
23
24
25
31
32
33
41
42
43
44
51
52
53
54
55
56
57
58
59
60
61

Do not tighten bolts until instructed.
Please ensure all parts attached and tighten bolts.
1.
2.
3.
4.
5.
6.
7.
Attach END CAP(21) on FRONT STABILIZER(2) and REAR STABILIZER(3),
connect the MAIN FRAME(1) to FRONT STABILIZER(2) and REAR STABILIZER(3)
using four BOLTS(53), eight WASHERS(55) and four NUTS(57).
Attach KNEE HOLDER(6) to MAIN FRAME(1), using two BOLTS(53), four
WASHERS(55) and two NUTS(57).
Attach SEAT ADJUSTER(5) and BACK SUPPORT(4) to MAIN FRAME(1), using
BOLT(51) and NUT(57).
Attach pre-assembled BACK ADJUSTER(7) to BACK SUPPORT(4), using BOLT(52),
and NUT(58). Tighten BOLT(52) and loosen approximately 1/2 turn to allow the BACK
ADJUSTER(7) to swing freely.
Attach SEAT PAD(32) to SEAT ADJUSTER(5) and BACK PAD(31) to BACK SUPPORT(4),
using BOLT(54), WASHER(56). Attach END PLUG(23) onto SEAT ADJUSTER(5) and
BACK SUPPORT(4).
Slide 50 SQ SPACER(22) onto KNEE HOLDER(6), then insert KNEE HOLDER DOWN(10)
into KNEE HOLDER(6). Attach END PLUG(24) onto KNEE HOLDE DOWN(10).
Insert FOAM PAD HOLDER(8) into the KNEE HOLDER DOWN(10) and slide FOAM
PAD(33) into the FOAM PAD HOLDER(8) and attach 1" ROUND PLUG to each end.
Thank you for purchasing the Bodycraft Flat / incline / decline Bench.
If You have any questions, please call your local BodyCraft dealer
or call our customer service department at 800-990-5556.
3
ASSEMBLY INSTRUCTION

4
EXPLODE VIEW
1
2
3
4
5
10
6
7
7
8
9
31
32
33
33
21
21
21
21
22
23
23
24
24
25
25
44
43
41 42
54
54
54
56
56
56
57
57
59
59
61
60
60
58
57
57
55
55
55
55
55
51
52
53
53
53