Body Craft MINI-XPress User manual

INSTRUCTION MANUAL
STRENGTH TRAINING SYSTEM
Press
X
MINI-
7352
Bodycraft is a division of Recreation Supply Inc.
P.O. BOX 181
Sunbury, OH 43074
QUESTION?
As a quality home gym supplier we are committed to your complete satisfaction. If you have
questions, or find missing or damaged parts, we will guarantee your complete satisfaction through
our authorized dealer service centers or our home office customer service department. Please call
your local dealer for assistance or BodyCraft at 800-990-5556 (9:00 AM - 5:00 PM). Our trained
technicians will provide immediate assistance to you, free of charge.

115
103
103
114
117 117
104
108
108
118
118
119
101
118
118
116
116
116
116
116
116
116
113
113
113
113
109
109
109
107
107
102
105
110
110
111
111
112
115
OVERVIEW
1

101
102
103
104
105
107
108
109
110
111
112
113
114
115
116
117
118
119
101
102
103
104
105
107 108 109 110
111 112 113
119
114
115 116 117 118
1
1
2
1
1
2
2
4
2
2
1
4
2
2
8
2
4
2
EXD TOP FRAME
LAT BAR
LAT FAOM PAD
LAT BAR HOLDER
TOP CABLE
PULLEY
50mm SQ. PLUG
3/8" BUSHING
AXLE COLLAR
SEALING RING
HOOK PLATE
3/8" X 3" HEX HEAD BOLT
5/16" X 1/2" HEX HEAD BOLT (ALL)
6mm X 6mm SET SCREW
3/8" WASHER
5/16" WASHER
3/8" NYLON NUT
FOAM TUBE
PARTS LIST
NO. DESCRIPTION QTY.
01/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/4 1/4 1/2 3/41" 2" 3" 4" 1/4 1/2 3/4 1/4 1/2 3/45" 6"
(inch)
2

STEP 1
3
114
117
117
104
108
101
118
118
118
118
116
116
116
116
116
116
116
108
116
116
113
113
113 113
1.Slide the Top Frame (101) over top of the Upright (3) and align holes. Attach the Top
Frame (101) using two 3/8" X 3" Hex Bolts (113), four 3/8" Washers and two 3/8" Nuts
(118).
2.Attach the Lat Bar Holder (104) to the Top Frame (101) using two 5/16" X 1/2" Hex
Bolts (114) and two 5/16" Washers (117). Cap the front and back of the Top Frame
with two 50mm SQ. Plugs (108).

T1
T6
T2
T3
T8
T5
T4
T7
T8
107
118
116
116
113
109
109
T7
116
116
113
109
109
107
STEP 2
T6
45
64
77
15
17
T5
44
64
64
74
74
52
52
T1
77
64
74
74
52
52
44
T2
77
44
64
T3
64
44
77
T4
64
77
15
44
TOP CABLE (105)
Top Cable 105 replaces Ab Cable (30) from base unit.
Route one end of the Top Cable (105) through the slot and over the pulley in Upright (3) as
shown in T1, down and under the pulley on Cable Arm Assembly as show in T2, then up
and over the pulley on Upright as shown in T3, down and under the top pulley on Cross
pulley block as shown in T4, up and over the pulley on Upright as shown in T5, down and
under the pulley on the Top Plate as shown in T6, then up and over the rear pulley on the
Top Frame as shown in T7 and ending over front of the pulley on top frame as in T8.
4