Body Craft PFT User manual

Bodycraft™ is a division of Recreation Supply, Inc.
P.O. Box 181 Sunbury, OH 43074
Phone [phone]
Fax:[phone]
www.bodycraft.com
[email protected]
PROFESSIONAL FUNCTIONAL
TRAINER!
Most activities in life and sports require you to
move in multiple planes, and utilize multiple
muscle groups. With the BODYCRAFT PFT, you
define the motion, allowing you to strengthen
every part of your body using everyday
activities. The PFT provides an unlimited array
of training movements to aid your favorite
activities, or sports.
The PFT can provide all the same exercises as a
set of dumbbells or a barbell, but can also
provide exercises that engage multiple muscle
groups creating a strong foundation, and core.
Functional training not only increases strength, it
also improves coordination and balance.
INDEPENDENT, ADJUSTABLE
CABLE COLUMNS!
The two independent steel 160 lbs. graduated
weight stacks allow for resistance from any
angle, at any height. A 2:1 weight stack to
resistance ratio allows for high speed and
extended range training movements. The first ten
plates create a resistance of 5 pounds each, and
the last ten plates create a resistance of 10
pounds each. Optional 210 pound weight stacks
are available (no 5 lbs. graduation).
COMPACT!
Only 40 inches deep x 53 inches wide x 83
inches tall!
Quality!
Great for home, or commercial environments!

Bodycraft™ is a division of Recreation Supply, Inc. P.O. Box 181 Sunbury, OH 43074 Phone [phone] Fax:[phone] www.bodycraft.com
Specifications:
Frame: Heavy 11 gauge, 3.25" x 1.75" oval steel tubing.
Dimensions: 83" H x 52" W x 40" D
Finish: Platinum Gray finish Is electromagnetically applied in
powder form to evenly coat all surfaces, then baked on at high
temperatures for a tough, long lasting finish.
Pulleys: 4.5" diameter, fiberglass impregnated nylon pulleys
with sealed ball bearings.
Cable: The most flexible nylon coated, 7 X 19 strand aircraft
cable rated at over 2000 lbs. tensile strength.
Weight Stack: Dual Steel 160-lbs. graduated weight.
The weight stack to user weight ratio is 2:1. Each 160 lb.
weight stack provides up to a total of 80 lbs. resistance.
Weight Stack Enclosures:
Full length acrylic panels provide safety and beauty.
Guide Rods:
Chrome plated 1" diameter tubular steel.
Accessories: Ankle Strap and two Single Handles are
included.
Optional Accessories:
Sports Stick rotates on sealed bearings and simulates the use
of golf club, tennis racquet, baseball bat, etc. Long Bar
attaches to both cables and rotates on sealed bearings. Great
for two handed presses, and pulls.
Warranty: In Home: Lifetime everything, no labor.
Commercial: Lifetime Frame, 2 years parts.
Corner Design
PFT With Optional
Flat To Incline Bench F603