Body Craft F601 User manual

Serial Number Location
Record your Serial number
and purchase date here:
S/N __________________
PURCH.DATE:_________
DEALER:______________
______________________
______________________
F601 FLAT / INCLINE
UTILITY BENCH
OWNERS MANUAL
SERIAL
12345678
Model No. F601 Recreation Supply, Inc.
BODYCRAFT
a division of Recreation Supply Inc.
7699 Green Meadows Dr.
Lewis Center, OH 43035

1
.
Congratulations and Thank You!
Important Safety Notes
QUESTIONS?
Thank you for selecting the Bodycraft F601 Flat Incline Bench.
The Bodycraft F601 offers an impressive array of strength training
exercises to develop every major muscle group of the body. Whether your
goal is cardiovascular fitness, a shapely, toned body or dramatic muscle size
and strength, the Bodycraft F601 will help you achieve the results you want.
For your safety and benefit, read this manual and the accompanying literature
before using the Bodycraft F601. Keep this manual for future reference.
If you have additional questions, please call your local Bodycraft F601
Dealer or our customer service department at 800-990-5556 Monday through
Friday, 9 am until 5 pm Eastern Standard Time.
There is a risk assumed by individuals who use this type of equipment.
Before beginning this or any other exercise program consult your physician.
This is especially important for individuals over the age of 35 or persons
with preexisting health problems. Recreation Supply, Inc. assumes no
responsibility for personal injury or property damage sustained by or
through use of this product.
1. This product must be assembled on a flat, level surface to assure its proper function.
2. Clean pads and frame on a regular basis. We recommend warm, soapy water.
Do not use harsh or abrasive chemicals.
3. Inspect and tighten all parts before every use. Replace any worn
parts immediately. Failure to do so may result in serious injury.
4. Keep children away from the BODYCRAFT F601 at all times.
5. Keep your hands away from cables and pulleys during operation.
6. Keep your hands away from moving parts other than the designated handles.
7. When adjusting the seat, make sure the spring pin is fully engaged.
If not, the seat may slip and cause serious injury.
8. Make certain all cables are seated within the pulleys before every use.
9. Exercise with care to avoid injury.
10. If you are unsure about the proper use of the BODYCRAFT F601 Bench call your
local BODYCRAFT dealer or our customer service department.
As a quality exercise equipment supplier we are committed to your complete
satisfaction. If you have questions, or find missing or damaged parts, we will
guarantee your complete satisfaction through our authorized dealer service
centers or our home office customer service department. Please call your local
dealer for assistance or BODYCRAFT at 800-990-5556 (9 AM - 5 PM) EST. Our
trained technicians will provide immediate assistance to you, free of charge.

F601 Bench Assembly Parts List
NOTE: IF A PART IS MISSING, IT LIKELY HAS BEEN PRE*INSTALLED FOR
QUALITY CONTROL PURPOSES. PLEASE PROCEED WITH ASSEMBLY.
(1) MAIN
FRAME
(5) SEAT
ADJUSTER (7) HANDLE
(3) REAR
STABILIZER
(4) BACK SUPPORT &
(6) BACK ADJUSTER
(Pre-Assembled)
(10) 45 X 75mm
RECT. END
CAP (4pcs)
(11) 45 X 75mm
RECT. END
PLUG (2pcs)
(12) BACK PAD (13) SEAT PAD
(15) KNOB
2
(2) FRONT
STABILIZER
0
(inch) 1" 2" 3"1/21/4 3/4 1/2 1/2 4" 5" 6"1/2 1/2 1/2
*Parts images are not to scale.
(21)(18) (22)
(24) (25) (26)
NO. DESCRIPTION QTY.
18
21
22
24
25
26
2
6
4
12
4
8
1/2" X 5" HEX BOLT
1/2" X 2-3/4" HEX BOLT
3/8" X 2-3/4" HEX THREADED
BOLT
1/2" WASHER
3/8" WASHER
1/2" NYLON NUT

Thank you for purchasing the Bodycraft Flat / incline Bench.
If You have any questions, please call your local BodyCraft dealer
or call our customer service department at 800-990-5556.
Do not tighten bolts until instructed.
1. Attach END CAP (10) to the FRONT STABILIZER (2) and REAR STABILIZER (3).
Attach FRONT STABILIZER (2) and REAR STABILIZER (3) to the MAIN FRAME (1)
using four 1/2" X 2-3/4" HEX BOLTS (21), eight 1/2" WASHERS (24) and four 1/2"
NYLON NUTS (26).
2. Attach HANDLE (7) to MAIN FRAME (1), using two 1/2" X 2-3/4" HEX BOLTS (21),
four 1/2" WASHERS (24) and two 1/2" NYLON NUTS (26).
3. Attach SEAT ADJUSTER (5) and BACK SUPPORT (4) to the MAIN FRAME (1), using
two 1/2" X 5" HEX BOLTS (18) and two 1/2" NYLON NUTS (26).
4. Attach pre-assembled BACK ADJUSTER (6) to BACK SUPPORT (4), using two
BUSHINGS (16), one 1/2" X 4-1/4" HEX BOLT (19), two 1/2" WASHERS (24), and one
1/2" NYLON NUTS (26). Tighten 1/2" X 6" HEX BOLT (29) and loosen approximately
1/2 turn to allow the BACK ADJUSTER (6) to swing freely.
5. Attach SEAT PAD (13) to SEAT ADJUSTER (5) and BACK PAD (12) to BACK
SUPPORT (4), using four 3/8" X 2-3/4" HEX BOLTS (22), four 3/8" WASHERS (25).
Attach END PLUG (11) to the SEAT ADJUSTER (5) and BACK SUPPORT (4).
Please ensure all parts attached and tighten bolts.
3
ASSEMBLY INSTRUCTION

4
EXPLODED VIEW
12
13
11
4
22
26
21
24
17
9
23 15
6
3
1
10
10
27
26
24
17
23
25
24
24
26
25
22
29
19
16
16
16
16
16
16
18
24
21
24
11
25
25
22 26
22
5
21
21
21
24
8
10
10
2
24 714
28
26
26
24
24
26

(17)
(23)
5
(1) (2) (3)
(4) (5) (6) (7)
(8) (9) (10) (11)
(12) (13)
(14)
(19) (21)
(15) (16)
(18)
(29)
(22) (24) (25)
(26) (27) (28)
NO. DESCRIPTION QTY.
COMPLETE PARTS CHART
*Parts images are not to scale.