Bogen CG8A User manual

Features
Grilles &
Baffles
GRILLES
• Available in aluminum, bright white,
or off-white finish
• Protects and conceals 8" speakers
• Constructed of metal or aluminum
WALL BAFFLE
• Constructed of 3/8" particle board with
reinforced corners
• Sloping front panel (13.5 degrees) provides
enhanced downward dispersion
Specifications subject to change without notice.
© 2008 Bogen Communications, Inc.
54-7777-11B 1107
Description Bogen metal grilles protect and conceal recessed 8" ceiling speakers. They are shipped complete with
the hardware needed to mount a speaker to the grille.
Bogenʼs Wall Baffle, WB8, will house any Bogen 8" speaker. Hardware for mounting a speaker to the
baffle included.
PG8A
WB8
Technical
Specifications
* Mounting hardware included ‡ Features hidden speaker mounting studs
CG8AW
SG8W
PG8W
PG8U
Note: Colors of speakers may not be accurate and should not be used for reference purposes.
CG8AW
PG8A
PG8U
PG8W
SG8W
WB8
Aluminum
Steel
3/8'' Particle
Board
Contoured
Low
Profile
Low Profile‡
15/carton
20/carton
10/carton
4 /carton
9 lb.
12 lb.
26 lb.
14 lb.
10 lb.
12-5/8'' Dia.
13'' Dia.
Off-white Enamel
Satin Aluminum
Bright-white Enamel
Off-white Enamel
Bright-white Enamel
Simulated Walnut
9-1/2'' W x 9-1/2'' H x
5-1/4'' D
3-1/4'' D (at bottom)
Material
Finish
Style
Quantity
Shipping Weight (carton)
Dimensions
Models*

50 Spring Street, Ramsey, NJ 07446, U.S.A.
Tel: [phone] • Fax: [phone]
www.bogen.com
Ceiling Grilles
(Use for CG8AW) The ceiling speaker grille shall be a Bogen model CG8AW aluminum grille, or equivalent,
capable of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be
12-5/8" and it shall be contoured and finished in off-white semi-gloss enamel. Mounting hardware shall be
included.
(Use for PG8A) The ceiling speaker grille shall be a Bogen model PG8A aluminum grille, or equivalent, capa-
ble of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13"
and it shall be low profile and finished in satin aluminum. Mounting hardware shall be included.
(Use for PG8U) The ceiling speaker grille shall be a Bogen model PG8U steel grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and
it shall be low profile and finished in bright white semi-gloss enamel. Mounting hardware shall be included.
(Use for PG8W) The ceiling speaker grille shall be a Bogen model PG8W steel grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13" and
it shall be low profile and finished in off-white semi-gloss enamel. Mounting hardware shall be included.
(Use for SG8W) The ceiling speaker grille shall be a Bogen model SG8W steel grille, or equivalent, capable
of protecting and concealing a recessed 8" cone-type loudspeaker. The diameter of the grille shall be 13",
the speaker mounting studs shall be hidden, and the grille shall be low profile and finished in bright white
semi-gloss enamel. Mounting hardware shall be included.
WB8 Wall Baffle The loudspeaker wall baffle shall be a Bogen model WB8, or equivalent, capable of housing
an 8" cone-type loudspeaker and angled (13.5 degrees) for additional downward sound dispersion. The baffle
shall be constructed of 3/8" particle board, glued and covered in simulated walnut vinyl. Glue blocks shall be
used to reinforce all side corner joints. The speaker opening shall be covered with a black grille cloth. Hardware
for mounting the speaker to the baffle shall be supplied. Overall dimensions shall be 9-1/2" W x 9-1/2" H x
5-1/4" D (top) x 3-1/4" D (bottom).
Architect
and Engineer
Specifications