Bogen Nyquist NQ-T1000 User manual

LCD Display VoIP Phone
User Manual
Nyquist NQ-T1000
2019 Bogen Communications, Inc.
All rights reserved.
740-00119
190614

Contents
iii
Contents
1 Using the VoIP Phone .................................................................. 1
1 Hardware Components and Features ............................................... 1
1.1 Common Status Icons............................................................. 4
2 Configuring the VoIP Phone................................................................. 6
3 Making Pages ............................................................................................. 7
3.1 Emergency-All-Call Paging ................................................... 8
3.2 All-Call Paging............................................................................ 8
3.3 Zone Paging................................................................................ 9
3.4 Record Page................................................................................ 9
4 Making Calls..............................................................................................10
5 Playing Alarms..........................................................................................11
6 Playing Tones............................................................................................12
7 Forwarding Calls......................................................................................12
8 Using the Voice Mail Feature .............................................................14
9 Recording Announcements.................................................................15
10 Playing Recorded Calls..........................................................................16
11 Restart Nyquist Server...........................................................................16
12 Stop Announcement..............................................................................17
13 Stop Scheduled Audio ..........................................................................17
2 Nyquist DTMF Feature Dialing Codes ...................................... 19
2.1 Alarm/Tone Activation (CoS: Activate Alarm
Signals | Manually Activate Tone Signals) .....................................19
2.2 Calling..........................................................................................................19
2.3 Call Forwarding (CoS: Call Forwarding)..........................................20
2.4 Call Parking/Call Pickup........................................................................20
2.5 Call Transfer (CoS: Call Transfer) .......................................................21
2.6 Conferencing.............................................................................................21
2.7 Monitoring/Recording ..........................................................................22
2.8 Paging..........................................................................................................22
2.9 Voicemail (CoS: Voicemail)..................................................................23
2.10 Walking CoS (CoS: Walking Class of Service) .............................23

iv
2.11 Dial Codes Used for Simulating Calls to Admin Station from
Station Call Switches ............................................................................24
2.12 Miscellaneous Dial Codes ...................................................................24

1Using the VoIP Phone
1
Using the VoIP Phone
The Bogen Model NQ-T1000 VoIP Phone by Yealink is designed to
serve as an admin or staff phone for various Nyquist systems. This
phone combines a traditional telephone keypad with a 132 x 64 pixel,
backlit graphical Liquid Crystal Display (LCD) to provide rapid, effi-
cient, and reliable control over many Nyquist features, such as
launching Emergency-All-Call pages and paging zones.
This manual guides you through the use of the VoIP Phone with the
Nyquist system.
1 Hardware Components and Features
The main components of the VoIP Phone are the LCD screen and the
keypad. The LCD screen shows the time of date and the station num-
bers and call-in priority of stations that are calling in. Depending
upon the system CoS programming, the VoIP Phone can display
menus to activate Zone Paging, All-Call Paging, Emergency All-Call
Paging, alarm signals, audio files, and external functions.
Note: Various T1000 menu controlled features are only available
on the Nyquist E7000 and only if the station Type is set to Admin
Phone.

2
Hardware components are described in the following table:
Figure 1-1, Hardware Components
Table 1-1, Hardware Components
Item Description
1 LCD Screen Shows information about calls, messages, soft
keys, time, date, and other relevant data:
• Default account
• Call information—caller ID, call duration
• Icons
• Missed call text or second incoming caller
information
• Prompt text
• Time and date

3
2 Power Indicator LED Indicates call status, message status and
phone’s system status. The following statuses
are available:
• Solid red – The phone is initializing.
• Fast-flashing red (300ms) – The phone is
ringing.
• Slow-flashing red (1s) – The phone receives
a voice mail or text message.
• Off – The phone is powered off, idle, or
busy or the call is placed on hold or muted.
3 Line Keys Allows you to activate up to two accounts and
to assign various features. The following sta-
tuses are available:
• Solid green – The line is connected and in
use.
• Fast-flashing green – The line is receiving
an incoming call.
• Slow-flashing green – The call is on hold.
• Off – The line is inactive.
4 Soft Keys Are labeled automatically to identify their con-
text-sensitive features.
5 Navigational Keys Allows you to scroll through displayed infor-
mation, confirm or cancel actions, answer or
reject incoming calls, and mute or unmute
calls.
6 MESSAGE Key Indicates and accesses voice mails.
7 HEADSET Key Toggles the headset mode.
8 TRAN Key Transfers call to another party.
9 RD Key Redials the previously dialed number.
10 Speakerphone Key Toggles the hands-free (speakerphone) mode.
11 Volume Key Adjusts the volume of the handset, headset,
speaker, ringer.
Table 1-1, Hardware Components (Continued)
Item Description

4
1.1 Common Status Icons
Some of the most common status icons that appear on the LCD
screen are described in the following table:
12 Keypad Provides the digits, letters, and special charac-
ters for the Nyquist application.
13 Speaker Provides hands-free (speakerphone) audio
output.
14 Hookswitch Connects and disconnects the phone from the
line.
15 Hookswitch Tab Secures the handset in the handset cradle
when the VoIP phone is mounted vertically.
Table 1-1, Hardware Components (Continued)
Item Description
Table 1-2, Common Display Icons
Icon Description
Network is unavailable.
Phone is in hands-free (speakerphone)
mode.
Phone is in handset mode.
Phone is in headset mode.
Voice mail message is available.
A text message is available.

5
The phone’s ringer volume is set to 0.
The call has been muted.
A missed call was received.
Call forwarding is on.
Table 1-2, Common Display Icons (Continued)
Icon Description

6
2 Configuring the VoIP Phone
Refer to the applicable Nyquist System Administrator Manual for
instructions on adding the VoIP Phone as a station. You will need the
Extension Number, Name, and MAC address for the phone.
Next, configure the VoIP Phone through the phone’s web user inter-
face (UI).
To configure the VoIP Phone:
Step 1 Identify the phone’s Internet Protocol (IP) address by
doing one of the following:
• Locate the IP address in your network’s Dynamic
Host Configuration Protocol (DHCP) client table.
• Press the VoIP Phone’s OK navigation key to dis-
play the IP address.
Step 2 Open your computer’s web browser, enter the phone’s
IP address (for example, http://192.168.0.10 or
Figure 1-2, Auto Provision Options