Boly MG984G Series User manual

Boly Trail Cameras – MG984G Series
MG984G Series
User Manual

Boly Trail Cameras – MG984G Series
Table of Contents
1. Getting Started.......................................................................................................... 1
2. Camera Operations.................................................................................................. 3
2.1 Batteries / Power Supply.................................................................................... 3
2.2 SD Card Information............................................................................................3
2.3 SIM Card Information.......................................................................................... 4
2.4 Camera Modes.....................................................................................................5
2.5 Manual Image / Video Capturing.......................................................................6
2.6 Manage Images and/or Videos..........................................................................6
2.7 Sending via MMS/GPRS/Molnus...................................................................... 7
2.8 Trigger Modes...................................................................................................... 8
2.9 Password Set..................................................................................................... 10
3. Camera Setup Settings & Display......................................................................11
3.1 Settings Interface & Display.............................................................................11
3.2 Mobile Communication..................................................................................... 12
3.3 Camera Setup Software................................................................................... 13
3.4 Setting up your camera for Molnus.................................................................15
3.5 Mobile Applications........................................................................................... 17
3.5.1 User Level....................................................................................................... 18
3.5.2 BG Tools Usage Instructions for Android App...........................................19
3.6 Camera Setup Options..................................................................................... 24
4. Detection Ranges – PIR Detection Zones........................................................30
5. Technical Specifications...................................................................................... 31
Appendix : Parts List................................................................................................32

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
1
1. Getting Started
Battery Tray
Lock Loop

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
2
This camera, a digital scouting camera with communication
function, is a digital infrared surveillance camera that can
be triggered by any human or animal movement and is
monitored by a highly sensitive Passive Infrared (PIR)
motion sensor. After triggered, the camera then
automatically captures high quality pictures (up to 30M
pixels) or records video clips (1080 FHD).
MG984G-30M: This model sends pictures instantly to your
mobile device or videos (less than 10M) to your e-mail via
GPRS network.
MG984G-V: This camera model can only send pictures to
your e-mail via GPRS network.
You will only be alerted when the camera is triggered unless
otherwise set per custom settings. It takes color pictures or
videos with sufficient daylight. While at night, the built-in
infrared LEDs can help take clear night pictures or videos.
DC Port

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
3
2. Camera Operations
2.1 Batteries / Power Supply
This camera is powered by eight AA batteries.
High-density, high-performance rechargeable or
non-rechargeable Alkaline batteries are
recommended. You can also use NiMH batteries as
well.When the camera’s battery levels are low, the
indication LED light will blink twice then the camera
will automatically shut down.(Each battery shoud
above 1.5V)
A DC 6-Volt, 2 A external power supply adapter can
also be used to power the camera (not included).
2.2 SD Card Information
To take full advantage of the latest technologies, we
recommend Class 10 SD cards or better, which have
fast transfer speeds and long durability for extensive
shooting in the most extreme outdoor conditions.
Some SD cards are deemed Secure Digital High
Capacity (SDHC) PRO cards which only work with
SDHC compatible devices only. Please check that
your product is compatible with SDHC cards.
Insert the SD card into the camera before
turning on the camera
This camera supports up to a 32GB capacity SD card
and has no built-in internal memory. The camera

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
4
will not function without the SD card properly
inserted into the camera.
Make sure the SD card is unlocked before
inserting it into the camera
The camera will power off with a code locked when
the SD card is inserted.
If you experience any problems with an
inserted SD card
Try reformatting the SD card, utilizing the camera’s
main settings option.
2.3 SIM Card Information
Insert the SIM card into the camera before
turning on the camera
The camera SIM card slot is sized for a standard SIM
card. If you have a nano or micro size SIM card,
utilizing a SIM card adapter (included with most of
our cameras) will be required to connect your camera
to the cellular network via SIM card.
Note: The camera will still function without a SIM
card. The SIM card is needed only for the
wireless/cellular messaging capabilities.

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
5
2.4 Camera Modes
The different modes are accessed by sliding the power
switch to the different positions marked on the
camera. The power switch is located inside the camera
on the bottom right of the LCD screen.
The different camera modes are as follows:
OFF Mode
Turns the camera off. The camera will still
consume a small amount of power while in OFF
mode. It is recommended to remove the batteries if
the camera will not be used for a long period of
time.
TEST/SETUP Mode
In this mode, the camera allows you to customize
the camera settings or play back pictures and
videos the camera has taken on the LCD display.
ON Mode [ Hunting Mode ]
Camera will take pictures or video when motion is
detected and/or at specific time intervals,
according to the programmed settings. After
switching the camera to the ON position, the red
LED motion indicator will blink for about 10
seconds and then turn off. This preset time allows
you to adjust the cameras position if needed,
before the camera becomes active.

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
6
2.5 Manual Image / Video Capturing
Place the camera in TEST/SETUP mode and press the
“►/SHOT” button on the right of the control pad to
manually capture photos or record video. Press
“►/SHOT” again to stop capturing video.
2.6 Manage Images and/or Videos
Place the camera in TEST/SETUP mode and press the
“OK/Play” button to view images or videos. The latest
image or video will be shown on the LCD screen.
To view:
Press ▲or ▼to view the next or previous image or
video.Press OK to start a video.
To delete:
Press OK in Test/Setup Mode to enter into
Playback mode and access the pictures and videos.
Press the ▲or ▼to toggle between photos to find
the photo or photos to delete. Once selected, press
the “/DEL” button and the options Del One and
Del All appear. Press OK when the Del One option
is selected. Press OK again to confirm you want to
delete the picture or video selected.

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
7
2.7 Sending via MMS/GPRS/Molnus
Images can be sent directly to your wireless
device/email/molnus, based on the Send Mode settings.
First,insert the SD & SIM card into the camera before
turning on the camera.
Second,turn on the camera in TEST/SETUP Mode,make
sure the SIM card is recognized and signal strength is
adequate.
Third,Select the send mode settings and fill in the correct
parameters.
You have the options of Molnus(default setting),Phone
MMS,Email MMS, Email GPRS.Videos will be sent in less
than 10MP.
（The MG984G-V support option: Email GPRS/Molnus）
To manually send a photo:
Put the camera in TEST/SETUP mode
Wait for the camera to acquire a network signal
and the SIM card to be recognized
indicates the SIM card is recognized by the camera.
indicates the SIM card is not recognized by the
camera or the SIM card is not working due to
connection/activation issues.
Take a manual photo by pressing the “SHOT/►”
button or press OK to view the photos stored on
the camera
Find the picture you want to manually send

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
8
Press the MENU button to pull up the Send To:
option that is currently set in the camera settings
Press OK again to send the picture via the
messaging option chosen in your camera settings
2.8 Trigger Modes
There are 3 different trigger modes for the camera: PIR
Trigger/Sensitivity, Time Lapse, and a combined
PIR/Time Lapse mode. These modes are activated by
three different menu options (PIR Trigger/Sensitivity,
PIR Interval, and Time Lapse).
PIR Trigger/Sensitivity
In this trigger mode, the camera will activate when
motion is detected. If the PIR Trigger/Sensitivity
option is set to OFF, the camera will not respond to any
motion within the camera’s trigger detection range.
Time Lapse
In this camera mode, the camera will activate at the
set time interval regardless of motion detection. If
the Time Lapse option is set to OFF, this trigger
function will be disabled.
Combined PIR/Time Lapse
For the combination of both PIR and Time Lapse
triggering, the following settings must be set
correctly:

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
9
PIR Trigger/Sensitivity must NOT be set to
OFF
The Time Lapse interval must be set to a
non-zero value.
The camera will capture pictures or video when motion
is detected and at the preset time(s), regardless of
motion detection.
● If PIR Trigger/Sensitivity and Time Lapse options
are BOTH OFF, the camera will not capture any photos or
videos.
Additional PIR settings to note:
PIR Interval
This setting indicates how long the PIR sensor will
be disabled after each camera triggering. During
this interval time, the camera will not react to any
detected motion or activate at the scheduled Time
Lapse interval.
Further detailed information about the trigger modes
can be found in Camera Setup Options section of the
manual.

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
10
2.9 Password Set
Encryption settings, you need to enter your pre-set
password to enter the camera, can play a role in
protecting privacy，composed of four digits.
This function is off by default, if you want to use the
option to open it.
2.9.1 Press ▲/▼to adjust the number from 0~9,/►
to change the password
2.9.2 Password settings need to enter the same
password two times to take effect.
2.9.3 After the password is set up, the next boot will
need to enter the correct password to enter the camera.
If you forgot this password, please contact us for
help
Password settings interface,need to enter the same
password two times
After the password is set successfully, the next boot will
need to enter the correct password to enter the camera.

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
11
3. Camera Setup Settings & Display
3.1 Settings Interface & Display
To update the camera settings, place the power switch
to the TEST/SETUP position.
To navigate the menus, utilize the following built-in
buttons:
MENU: Enter the program menu in Preview Mode
▼►: Move between menu options (OK to select)
OK / PLAY: Save parameter settings and play videos
DEL / : Delete an image/video when viewing them
SHOT / ►: Capture a photo or record a video manually
When the camera is in TEST/SETUP Mode, the screen
will activate and display the following:
indicates the SIM card is recognized by the camera.
indicates the SIM card is not recognized by the
camera or the SIM card is not working due to
connection/activation issues.
China- Unicom-4G
SD card icon
Available space
Battery level
Number of image

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
12
3.2 Mobile Communication
The camera can receive and respond to commands
sent via SMS, MMS, GRPS ,Molnus and the Apple or
Android application, as long as the camera is correctly
connected to a wireless carrier.
To enable the SMS functionality using the mobile
application, you must complete the following steps:
Place the camera in Test/Setup Mode and go into
the menu Setup options
Set SMS control to ON in the second tab from the
right in the camera menu.
For MMS/GPRS/Molnus functionality, the following
menu Setup options will need to be set:
MMS network settings (varies depending on
carrier) （not available for MG984G-V）
GPRS network settings (varies depending on
carrier)
Molnus (varies depending on carrier)
Send to Phone option :
MG984G-30M:MMS/GPRS/Molnus
MG984G-V:GPRS/Molnus
*The MMS functionality is not available for MG984G-V.
The settings for the network options vary between service
providers. You will need to contact your SIM service
provider for specifics on these settings.

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
13
3.3 Camera Setup Software
For assistance with the camera setup, download the
camera setup application (BMC_config.zip), along with
the basic instructions both found from our website
www.bolymedia.com/index/Support.
Open the software and select camera model:
STEP 1: Select your country and carrier.
STEP 2: Check WAP/Internet Parameters:
Fill out the required fields (marked with an asterisk).
Input Email server such as “smtp.gmail.com” or
“smtp.bolymedia.com.”
NOTE: If your email uses encryption techniques, please
select the corresponding protocol. Such as using Gmail
as the sending email, you should select SSL to ensure
the success of sending mail.

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
14
Step 2
Step 1
Step 3
Step 4
Step 5

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
15
STEP 3: Choose between default or manual settings. For
first time use, we suggest using the default settings.
STEP 4: Input the phone number of the phone to
receive/send the remote commands and images in the
“administrator number” field and email address in
“Receive Email 1” field (This is NOT the phone number of
the inserted SIM card that resides in the camera).
STEP 5: Save the .txt file in the GSM folder of SD card
after all settings are complete. The program names
the .txt file. The txt file must be loaded into the specific
camera’s GSM folder.
If your country or SIM card provider is not listed, select
“Others”. You will need to ask the SIM card provider for
their specific MMS URL, MMS APN, Port, MMS IP,
Account, Password, GPRS APN, GPRS account, GPRS
password. For email sending, your email service provider
will be able to provide the send email server and port
settings.
Note: Once the SD card is inserted in the camera and the
camera is turned on, this file will automatically be
uploaded to the camera and be deleted from the SD card.
3.4 Setting up your camera for Molnus
To get started, you need to supply the camera with
batteries and a SIM-card that has internet access.
You also need to have the phone number and the APN
name to the SIM-card you will use for the camera.
The APN name is provided by the operator of the SIM
card. Each operator has their own APN name. If not

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
16
present in any documents that was sent along with the
SIM-card, then please check the operators homepage for
APN settings.
Register your Molnus account.
Cloud Service Web links:
https://molnus-asia.azurewebsites.net/#/login?ret
urnUrl=%2Fcamera-list
Login to your Molnus account and go to the My
Cameras page.(In Molnus)
Press the green button Register camera.(In
Molnus)
Give your camera a unique name of your
selection in Camera name.(In Molnus)
Now start the camera in SETUP mode, and when it shows
the operators name in camera display, its time to go to
next step.
Press the Menu button and press (Arrow-right)
button three times.(On camera)
Press the (Arrow-down) button seven times, so
that the blue marker is placed on Version
Enter.(On camera)
Press OK, and you will see information about
your camera on display.(On camera)
Now go to Molnus.
On the IMEI row you fill in the IMEI number that
you will see on the cameras display.(In Molnus)
Choose the region for where the camera is
planned to be used.(In Molnus)
Type in the Control code that you will find in
camera display.(In Molnus)
Type in the phone number to the SIM card for the
camera. Please note: you must use a plus-sign (+)

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
17
and country prefix! (Example +44 for UK and
+49 for Germany)(In Molnus)
Type in the APN name (and username and
password if your operator demands this)(In
Molnus)
Slide the functions switch to ON position on your
camera, and quickly place the device with the
camera facing an area with no movement, for
example against an wall.(On camera)
Press the green Register button In Molnus, and
wait for about 5 minutes.(In Molnus)
The registration should now be done, and camera should
now be able to upload images to Molnus.
Test the function by making some moment in front of
camera. Within some short time, the images will show up
in Gallery In Molnus.
If you would like to use Molnus on your smartphone, then
please download the Molnus app on Google Play or
Apple's App Store.
3.5 Mobile Applications
When the camera is switched to the ON mode, you can
change some of the basic camera settings through the
mobile application. There are currently apps supported by
Android and Apple devices. Charges or fees may apply
when sending text messages to the camera depending on
your cellular provider.
For Android, you can search BGTools from
Google store or download the application directly
from our website, under the Downloads section:
http://www.bolymedia.com/index/Support

Boly Trail Cameras – MG984G Series
User Manual / www.bolymedia.com
18
For Apple, search BGTools in the official Apple
Apps store.
3.5.1 User Level
There are two user authorization levels for this feature:
administrator and normal users.
Functions
User Level
Set administrator phone
number
Only administrator’s
password
Set administrator’s
password
administrator
Set camera parameters
administrator
Set normal user
administrator
Receive emergency calling
administrator, normal user
Send SMS for on spot
picture
administrator
Receive MMS when
triggered
administrator, normal user