Boly SG2060 Series User manual

User Manual
Trail Camera
SG560K/SG560X/SG562-C/SG2060 Series/SG562-D

Boly Trail Cameras
Table of Contents
1.Getting Started................................................................1
2.Camera Operation.......................................................... 4
2.1 Batteries/ Power Supply......................................4
2.2 SD Card Information...........................................4
2.3 Camera Mode...................................................... 5
2.4 Trigger Mode.......................................................6
3. Camera Setup Settings and Display.............................. 7
3.1 Settings Interface & Display............................... 7
3.2 Manual Image / Video Capturing........................8
3.3 Manage Images and/or Videos............................ 8
3.4 Camera Setup Operation..................................... 9
4.Technical Specifications...............................................19
5.Parts List.......................................................................21

Boly Trail Cameras
1
1.Getting Started
①
②
③
④
⑤
⑥
⑧
⑦
①
IR LED
②
Flash: Available for SG560X/
SG2060-X/SG562-D/SG2060-D
③
Indication
④
Microphone
⑤
PIR
⑥
Lens
⑦
Lock
⑧
Speaker: SG2060Series/SG562-D

Boly Trail Cameras
2
4x1.7mm DC in
4x1.7mm DC in
Model
Product Features
SG560K-18mHD
Black IR, 100ft detection range
SG560X-18mHD
Motion sharp camera, 100ft. detection
range
SG562-C
White LED Flash Camera, color pictures
and videos at night, Motion Sharp
Technology

Boly Trail Cameras
3
SG562-D
Combination White LED/Xenon Flash,
color pictures and videos at night
SG2060-X
Motion Sharp 36MP camera, Motion
Sharp Technology
SG2060-U
Ultra-High Quality 25MP camera, Dual
Focus
SG2060-K
Ultra-High Quality 36MP, Extra long
detection range
SG2060-D
Combination White LED/Xenon Flash,
color pictures and videos at night， Motion
Sharp Technology

Boly Trail Cameras
4
2.Camera Operation
2.1 Batteries/ Power Supply
The camera is powered by four or eight AA batteries.
High-density, high-performance, rechargeable alkaline or NiMH
batteries are recommended. When the batteries are low, the
camera will automatically shut down.
A DC 6V/2A external power supply adapter (not included) can
also be used to power the camera.
2.2 SD Card Information
Insert the SDcard into the camera before turning on the
camera.
This camera supports up to a 32GB capacity SD card and has no
built-in internal memory. The camera will not function without
the SD card properly inserted into the camera.
Make sure the SD card is unlocked before inserting it into
the camera.

Boly Trail Cameras
5
The camera will operate properly with a locked SD card
inserted, but the card will not be able to store captured images
or videos taken by the camera.
Do not remove the SD card while the camera is on.
Removing the SD card while the camera is on risks damaging
the internal components of the camera.
If you experience any problems with an inserted SD card,
try reformatting the SD card using the camera’s main settings
option.
2.3 Camera Mode
ON Mode
The camera will capture pictures or videos when motion is
detected and/or at specific time intervals, according to the
programmed settings. After switching the camera to the ON
position, the motion indicator LED(red) will blink for about 10
seconds and then turn off.This delay time allows you to adjust
the camera position if needed before the camera becomes active.
SETUP Mode

Boly Trail Cameras
6
Customize the camera settings, or playback pictures and videos
the camera has taken on the LCD display.
OFF Mode
Turns off the camera. The camera will still consume a small
amount of battery power while in the OFF mode. It is
recommended to remove the batteries if the camera will not be
used for a long period of time.
2.4 Trigger Mode
PIR Triggering: The default setting is on. If PIR Triggering is
on, the camera is only active when motion is detected. If PIR
sensitivity is set to OFF, the camera stops responding to the
motion.
Timer Triggering: The default setting is OFF, which means
timer triggering is disabled. When the timer triggering interval
is set to a non-zero value, the camera starts to work at a preset
interval. Users need to set the PIR sensitivity to OFF if they
want the camera to work only at preset intervals.
PIR and Timer Triggering: For both PIR triggering and Timer

Boly Trail Cameras
7
triggering, users need to set PIR sensitivity to low, normal, or
high according to the external environment, and set the Timer
interval to a desired non-zero value. The camera will capture
pictures or videos in a preset time interval even if there is no
motion detected. The camera will also capture pictures and
videos if motion is detected.
3. Camera Setup Settings and
Display
3.1 Settings Interface & Display
To update the camera settings, move the power switch to the
SETUP position.
Menu: Enter the program menu in preview mode
: Exchange between playback and preview mode
DEL: Delete a photo or video
: Capture a photo or record a video manually
▼▲►◄: Navigate parameter settings
OK: Save parameter settings and play videos

Boly Trail Cameras
8
When the camera is in SETUP mode, the screen will activate
and display the following:
3.2 Manual Image / Video Capturing
Place the camera in SETUP mode and press to manually
capture photos or record video. Press again to stop capturing.
3.3 Manage Images and/or Videos
Place the camera in the TEST/SETUP mode and press button
to view images or videos. The latest image or video will be
shown on the LCD screen.
To view:
Press ▲or ▼to view the previous or next image/video, press
to play a video.(SG562-D only can view the image)

Boly Trail Cameras
9
To delete:
Press DEL to delete images or videos in the playback state. If
you are in the preview state,press to enter into playback state
first.
3.4 Camera Setup Operation
To view the camera settings menu, slide the power switch to the
setup position.Use the ▼or▲buttons to select sub-menus; use
◄ or ► to select different options.Press OK to save the
settings.After changing EACH setting in the Setup menu,
press OK or the camera will not keep new settings.
Depending on the different models, not all menu options may be
available on your specific camera.
Menu
Options
Description
Camera Mode
There are three camera modes.
Photo: to take photos.
Video: to capture video.
Pic+Video: to take a picture with a video

Boly Trail Cameras
10
clip.This mode disables the photo burst
function.
Default: Photo
Set Clock
To set the camera’s clock.The clock format is
YY/MM/DD hour:minute:second.Press▼▲to
change the value.Press ►◄to select date or
time field.
Photo Size
Choose the image size,e.g.18MP,12MP,5MP
or 25MP,14MP,8MP or 36MP,25MP,14MP.
Default:36MP (SG2060-K/X/D)
25MP(SG2060-U)
Others:18MP
Photo Burst
Choose the number of continuous photos
taken after each trigger.
When the Camera Mode is set to Pic+Video,
the Photo Burst option is automatically
disabled,resulting in only one picture captured
with the video. When the Camera Mode is set
to Photo, the Photo burst option will operate
normally as specified.

Boly Trail Cameras
11
Default:1
Video Size
Choose the video size: 1920x1080,1280x720
or 640x480.(1920x1080 not available for
SG560K-18mHD)
Default:1920x1080
(1920x1080 is not available for
SG560K-18mHD,Default: 1280x720 )
Video Length
Choose the duration of video recordings. This
parameter is only active and adjustable when
the device is in video mode and ON.Press▼▲
to decrease or increase the value.Its value
extends from 5 to 120 seconds or 180
seconds(for SG2060 Series).
(SG560K-18mHD from 5 to 60 seconds)
Default:10Sec
Time Lapse
If time lapse is on, the camera can capture
images or videos at a preset time interval
regardless of whether a motion is detected.The
default setting is off,which means the timer

Boly Trail Cameras
12
function is disabled.Changing this parameter
to a non-zero value turns on the Time Lapse
mode,and the camera will take photos at the
given time interval.NOTE: If the PIR Trigger
is set to off,then Time Lapse can’t be set to
off.
Default: OFF
PIR Trigger /
PIR
Sensitivity
This parameter defines the sensitivity of the
PIR
High: indicates that the camera is more
responsive to motion. It is recommended to
use high sensitivity in a room or environment
with little interference.
Normal: The default value is normal.
Low: means the camera is not very responsive
to motion.It is recommended to use this setting
in outdoor environments or environments with
a lot of interference like wind,smoke,near a
window, etc.

Boly Trail Cameras
13
OFF: the camera is not triggered by motion to
capture pictures or videos.
NOTE: The sensitivity of the PIR is strongly
related to the temperature. A higher
temperature leads to a lower sensitivity.
Therefore, it is suggested to use higher
sensitivities for high-temperature
environments.
Default: Normal
Illumination
Choose the range of the flash. The optional
parameters are ShortRange and LongRange.
Available for SG562-D
Default: LongRange
PIR Interval
This setting indicates how long the PIR sensor
will be disabled after it is triggered. During
this time the PIR sensor will not react to any
detected motion or scheduled timer functions.
The PIR Interval can be set between zero
seconds to a maximum of 1 hour. Press LEFT

Boly Trail Cameras
14
or RIGHT to decrease or increase the desired
PIR Interval time.
Default:5Sec
Flash Type
Choose the type of flash for night
photography: white LED, Xenon. When white
LED is selected, motion blur is not supported
and power consumption is low; when Xenon
is selected, motion blur is supported and
power consumption is large. (Available for
SG2060-D)
Default: Xenon
Work Day
Choose the days of the week the camera works
on. Not available for SG2060 Series and
SG560K-18mHD.
Default: All
Working Hour
This setting controls when the camera is active
each day. If activated, the camera will NOT
take pictures or videos outside of the specified
working hour, regardless of any other setup

Boly Trail Cameras
15
option settings. The values are set to military
time which ranges from 00:00 to 23:59.
Default: OFF
Camera
Position
You can set an A-Z indicator for each of your
cameras in order to distinguish which photos
are from a specific camera.
Default: OFF
Time Stamp
It defines whether the date and time should be
stamped on the picture or not. Available for
SG560X
Default: On
Language
Choose the language for the menu.
Beep Sound
Enable or disable the beep sound. Available
for SG2060series
Default: On
Game Call
It allows the camera to play an audio file at a
preset time each day. The audio file must be
saved in the directory of \DCIM\100BMCIM\

Boly Trail Cameras
16
with the name of IMAG0001.WAV after
formatting the SD card and setting the game
call to on, only available for SG2060series.
Default: Off
Recycle
Storage
In hunting mode, when the SD card is full, the
first images or videos will be replaced by new
pictures or videos. This allows you to capture
more without the need to retrieve your
memory card manually. In SETUP mode, the
SD card can’t recycle storage.
Default: Off
Format SD
Deletes all images and videos on the SD card.
Make sure to make a backup of important data
before selecting this option.
Default
Settings
Restore all camera settings to default values.
Version
It contains version information.

Boly Trail Cameras
17
3.5 Troubleshooting
Q1: There is something in front of the camera lens.Is
the camera broken?
A: The camera is not broken.
What’s in front of the lens is an
IR-Cut filter. When the camera is
powered on, the IR-Cut will reset and cover the lens. When the
camera is powered off, the IR-Cut will be at a random place
Q2: The camera controller is not working anymore
A: Most likely, no SD card was inserted in the camera when it
was turned on. Please make sure a working SD card has been
inserted in the camera before it is turned on.
Q3: Why did the display screen suddenly turn black?
A: To reduce power consumption, the camera will shut down
automatically after 3 minutes if left idle. Please turn the power
on again if you want to continue.

Boly Trail Cameras
18
PIR Detection Zone
This camera has a new PIR, which is patented. The new PIR’s
detection range can reach 100ft. in good environments. The
following picture compares the detection zone between the
normal and new PIR.
The PIR detection angle (α) is smaller than the field of view
(FOV) angle (β). The advantage of this design is to reduce the
empty picture rate and capture most, if not all, motions.