Suntek HC-910Pro User manual

Model:HC-900Plus
APP&Cloud Service
30MP 2
H.265
Model:HC-900Plus
APP&Cloud Service
30MP 2
H.265
Model:HC-910Pro
Live video & APP

Videorecording
SPECIFICATIONS
Photo recording
Photo resolution
File format
Time lapse mode
Multi-shot mode
Stamp
Capture mode
30 /24 / 20 / 16 / 12 / 8 / 5 / 3 MP
.JPG
5 / 30min , 1 / 2 / 3 / 6 / 12 / 24hour
Up to 9 photos per detection
Date, time, temperature (℃/℉)and
moon phase
Camera /Video /Camera&Video /
Time-lapse
Videoresolution
File format
Video length
Capturemode
4K / 2K / 1080P / 720P / VGA
.MP4 / H.265
5s /10s / 30s / 60s / 90s
Colorful mode at daytime,
black and white mode at night
Memory storage
Support Internalmemory:none
External memory: Micro SD card
(up to 256GB, Not included)
- 01 -
Cellular/Wireless Transmission
Picture Instantly record in the Cloud and APP
Video
Live Video APP control to check video or record
Instantly record in the Cloud and APP

Power source
Dimensions
Waterproof level
Viewing
Built-in screen TFT 2.0”
Alkaline Battery
External Power Jack
1.5V AA Battery*8
DC 12V/1A(3.5x1.3mm)
Detection system
Motion Sensor
Detection Angle
Detection Range
Trigger Speed
Delay between each detection
1x PIR
90°
Adjustable from 1 to 98 Ft
0.2second
1/10 seconds, 1/3/5/10/15/30 minutes
Night time illumination system
Infrat LEDs
Flash Range
Exposure
＜98 Ft
Auto / 100 / 200 / 400
Optical field of view
120°
155mm x 84mm x 65mm
Recommendations
Operating temperature (-4℉to + 158℉) (-20℃to + 70℃)
IP 66
- 02 -
No-glow lR led

THE BASICS
- 03 -
Antenna
Photosensitive
Lens
LED Indicator

INSTALLATION
- 04 -
Step 1
Open the battery cover and
insert 8 batteries (AA)
following to the positive and
the negative battery sign
01
02
Close the battery cover to
resist water and dust.
03

- 05 -
Step 3
Insert the sim card into the card slot after sim card is inserted
turn on and check the letf side of the screen.
Step 2
Insert Micro SD(Not included) memory card
to Trail Camera.

- 06 -
App (iOS) App (Android)
or
Step 5
Scan the QR codes below search for“SUNTEKCAM” on the Apple app store
or search for “SUNTEKCAM” on the Google Play to download the app.
②
Tips：slide the mode switch form TEST to ON.
The camera will start working after 10 seconds countdown,
the red indicator light blinks meanwhile.
Step 4
①Slide the mode switch
Check the signal grid color.
Green means receiving signal, White means signal reception failed.
Need to check if the sim card whether locked or effective.

- 07 -

- 08 -

- 09 -
OPERATING BUTTON
MENU Menu Button -- Menu Setting
SHUTTER Shutter Button -- Start/End Video Recording or Photo Taking
Video Button -- Video Recording Mode
Camera Button -- Photo Mode
Replay Button -- Replay Mode
OK Button
EXTERNAL POWER SUPPLY
Use 12V DC Power source (Not included)
Tips：In replay viewing page, slide the " " and " " for browsing.
Press the " SHUTTER " button, to quit the replay view page.

- 10 -
Setup
SubMenu
Description
Mode
Camera,video,camera
＆video,Timelapse
Picture,video,picture
and video,taking piture
regular
Resolution
Each Video max 90 sec,
default 5 sec
Record Audio
On/Off
VideoWithSound
SETUP MENU
4K, 2K, 1080P, 720P, VGA Video resolution
5/10/30/60/90 seconds
Video Length

- 11 -
Setup Sub Menu Description
Image resolution
Interval Max 30 minutes delay
camera menu language
Sequcence 1/3/6/9 pictures Max 9 pics one shot
ISO Auto/100/200/400 Exposure level
Over write On / Off Cycle Recording
PIR Sensitivity High/Medium/Low Adjust PIR sensitivity
Frequency 50HZ / 60HZ Screen refresh rate
Camera ID CAM000 6 numbers or letters
Password On / Off 4 numbers
Working Timer 00:00:00 to 23:59:59 N/L
Date / Time DD/MM/YY N/L
Format OK / Cancel Format memory card
Default Setting OK / Cancel Back to default
1/10senconds,
30/24/20/16/12/8/5/3MP
Image Size
1/3/5/10/15/30minutes
5/30minutes,
1/2/3/6/12/24hour
TimeLapse Take pic every 5min
EN/FR/DE/IT/ES/POR/HR/
DAN/SVE/SUO/POL/PYC
Language
Transfer frequency Each N/L
Version camera firmware version

- 12 -
SYSTEM UPGRAD
1).Click to the menu interface to open Network and
select Check Update.
2).Check whether your machine is the latest version after
opening.
When the machine interface displays the current version
and there is no prompt to update, it means it is now the
latest version.

- 13 -
If the blue font New Version appears below the version
number, you can choose to update or not to update.
If you choose to update, you need to click FW to update.
Wait until the progress bar reaches 100% and the upgrade is
complete.

-
InThebox
Camera
Mounting Strap
Manual
Card reader
- 14 -

Q：Iwanttousethiscamera,whatdoIneedto
p
re
p
are？howtosetu
p
?
Q：Is it
p
ossible to receive live ima
g
es remotel
y
?
Q:What kindoftelephoneoperatorsdo yousupport?
TROUBLESHOOTING
A：You only need to prepare a SIM card，(Please note that it must be a prepaid SIM
card，closed PIN code,) Use your mobile phone to download our APP (SUNTEKCAM),
use the APP to scan the camera's device ID, device name, you can fill in any name,
device password 123456, then you can use it
A：This camera support video and image receiving remotely and wirelessly,
also support live video.
A: This camera support most sim cards in Europe, if you are in the US or
Canada, please buy US version ones. If you have met any question during
using or setting, just contact us for solution.
- 15 -