4
2 2
3
1
6
4
5
1 2
7
3
LET’S GO!
1 |Preparation
a|Carefully remove the front panel
from the front of the camera housing.
b|Remove the battery magazines and
insert 4 batteries into each magazine.
c|Insert the battery magazines into
the camera.
d|Insert the SD card into its slot.
2 |Set date and time
a|Push the MENU button.
b|Scroll down to Date and Time.
c|Push the OK button.
d|Using the “Up” and “Down” buttons,
set the desired values.
e|Push OK to verify.
3 |Setting the camera mode (Photo/Video)
a|Push the MENU button.
b|Scroll down to Mode.
c|Using the “Up” and “Down” buttons,
set the desired mode.
d|Push OK to verify.
4 |Turning the camera on
a|Mount and position the camera at
the desired location.
b|Turn the main switch to ON.
c|Using gentle pressure, attach the
front panel to the front of the
camera.
SCOPE OF
DELIVERY
1 |MINOX DTC 460 Trail Cam
2 |Front panel
3 |2x mounting straps
4 |USB cable
5 |Wall mount
6 |This Quick Start Guide
7 |Safety instructions
All setting options can be found at www.minox.com -> Support -> Downloads
WHAT IS WHAT?
1 |Controls display
2 |Battery compartments
3 |SD card slot
4 |Operation mode switch
