BOMBAY 1883226 User manual

1883226
Montpellier Curio Cabinet
Page 1 of 7 R1-10-1-03
Parts and Hardware List
A. Top 1 pc
B. Right Side Panel 1 pc
C. Left Side Panel 1 pc
D. Bottom 1 pc
E. Right Door 1 pc
F. Left Door 1 pc
G. Tassels 2 pcs
H. Shelves 2 pcs
I. Shelf Supports 8 pcs
J. Back Panel 1 pc
K. Legs 4 pcs
L. Pan Head Screws 14 pcs
M. Flat Head Screws 8 pcs
N. Flat Head Screwdriver 1 pc
O. Phillips Head Screwdriver 1 pc
P. Allen Wrench 1 pc
Q. Allen Head Bolts 4 pcs
R. Lock Washers 4 pcs
S. Flat Washers 4 pcs
T. Connecting Bolts 4 pcs
U. Eccentric Cams 4 pcs
V. Plastic Caps 4 pcs
∗ Please make sure that you have all the parts and hardware indicated above before you begin assembly of this item.
∗ Use the hardware illustrations to determine correct piece and size.
∗ This item should be assembled on a soft surface to prevent scratching the finish during assembly.
∗ This item may require periodic tightening.

1883226
Montpellier Curio Cabinet
Page 2 of 7 R1-10-1-03
Hardware Illustrations
V. Plastic Cap
L. Pan Head Screw M. Flat Head Screw
T. Connecting Bolt
I. Shelf Support U. Eccentric Cam
Q. Allen Head Bolt S. Flat Washer
R. Lock Washer

1883226
Montpellier Curio Cabinet
Page 3 of 7 R1-10-1-03
Attach Legs
Parts required
D. Bottom 1 pc Q. Allen Head Bolts 4 pcs
K. Legs 4 pcs R. Lock Washers 4 pcs
P. Allen Wrench 1 pc S. Flat Washers 4 pcs
1. Attach Legs (K) Align the pre-drilled holes in the corner blocks between aprons of the Bottom (D) with pre-
threaded holes in the Legs (K). Secure with Allen Head Bolts (Q), Lock Washers (R) and Flat Washers (S) by using
Allen Wrench (P). See Illustration #1.
K
K
K
K
P
D
QR
S
Illustration #1

1883226
Montpellier Curio Cabinet
Page 4 of 7 R1-10-1-03
Attach Top and Bottom with Sides
Parts required
A. Top 1 pc T. Connecting Bolts 4 pcs
B. Right Side Panel 1 pc U. Eccentric Cams 4 pcs
C. Left Side Panel 1 pc V. Plastic Caps 4 pcs
D. Bottom 1 pc N. Flat Head Screwdriver 1 pc
2. Attach Connecting Bolts (T) Insert the Connecting Bolts (T) into the pre-threaded holes in Top (A) and Bottom
(D) and secure using Flat Head Screwdriver (N). See Illustration #2.
3. Attach Top (A) & Bottom (D) to Side Panels (B,C) Insert the Connecting Bolts (T) in the Top (A) and Bottom
(D) into the pre-drilled holes in the Left Side Panel (C) and Right Side Panel (B). Be sure the dowels in the Left
Side Panel (C) and Right Side Panel (B) align with the pre-drilled holes in the Top (A) and Bottom (D). Insert the
Eccentric Cams (U) into the pre-drilled holes in the Left Side Panel (C) and Right Side Panel (B). Note: Make sure
the ‘X’ pattern faces out and the arrow of Eccentric Cams (U) point towards Connecting Bolts (T). Use the
Flat Head Screwdriver (N) to adjust the Eccentric Cams (U) and lock the Connecting Bolts (T) in place by turning
in a clockwise direction. Cover the Eccentric Cams (U) with the Plastic Caps (V). See Illustration #2.
V
N
U
N
T
C
A
B
C
D
Illustration #2

1883226
Montpellier Curio Cabinet
Page 5 of 7 R1-10-1-03
Attach Back Panel
Parts required
A. Top 1 pc J. Back Panel 1 pc
B. Right Side Panel 1 pc L. Pan Head Screws 14 pcs
C. Left Side Panel 1 pc O. Phillips Head Screwdriver 1 pc
D. Bottom 1 pc
4. Attach Back Panel (J) Place the Back Panel (J) into the notched edges of the Side Panels (B,C), Top (A), and
Bottom (D). Secure in place with the Pan Head Screws (L) using the Phillips Head Screwdriver (O). See Illustration
#3.
L
O
J
Illustration #3