BOMBAY Morgan 1860304 User manual

1860304
Morgan Twin Bed-Antique White
Page 1 of 3 R1-6-9-01
Parts and Hardware List
A. Headboard 1 pc
B. Footboard 1 pc
C. Side Rails 2 pcs
D. Support Slats 4 pcs
E. Phillips Head Screws 20 pcs
F. Phillips Head Screwdriver 1 pc
∗ Please make sure that you have all the parts and hardware indicated above before you begin assembly
of this item.
∗ Use the hardware illustrations to determine correct piece and size.
∗ This item should be assembled on a soft surface to prevent scratching the finish during assembly.
∗ This item may require periodic tightening.
Hardware Illustrations
E. Philips Head Screws

1860304
Morgan Twin Bed-Antique White
Page 2 of 3 R1-6-9-01
Assemble the Headboard & Footboard
Parts required
A. Headboard 1 pc C. Side Rails 2 pcs
B. Footboard 1 pc
1. Attach the Side Rail (C). Insert the exposed hooks of the Side Rail (C) into the pre-bored slots of the
Headboard (A) and Footboard (B), press down on the Side Rail (C) onto the pins in the Headboard (A). (Make
sure that the hook is all the way down onto the pins.)
2. Repeat step 1 for the other side as shown in illustration#1.
Illustration # 1

1860304
Morgan Twin Bed-Antique White
Page 3 of 3 R1-6-9-01
Assemble the Support Slats
Parts required
E. Phillips Head Screws 20 pcs F. Phillips Head Screwdriver 1 pc
3. Attach the Support Slats (D). Place the Support Slat (D) over the cleat of Side Rails (C). Secure both sides of
each Support Slats (D), using the Phillips Head Screws (E) with the Phillips Head Screwdriver (F).
4. Secure the plate at the end of the Side Rails (C) to the Footboard (B) and Headboard (A) using the Phillips
Head Screws (E) with the Phillips Head Screwdriver (F). See illustration #2
Illustration # 2