BOMBAY Huntington 1854420 User manual

1854420
Huntington Occasional Table-JV
Page 1 of 2 R1-04-13-05
Parts List
A. Top Assembly 1 pc
B. Post 1 pc
C. Base Assembly 1 pc
D. Allen Head Bolts 1 pc
E. Lock Washers 1 pc
F. Flat Washers 1 pc
G. Allen Head Wrench 1 pc
∗ Please make sure that you have all the parts indicated above before you begin assembly of this item.
∗ This item should be assembled on a soft surface to prevent scratching the finish during assembly.
Hardware Illustrations
D. Allen Head Bolt
E. Lock Washe
r
F. Flat Washer

1854420
Huntington Occasional Table-JV
Page 2 of 2 R1-04-13-05
Assembly Instructions
1.Attach Post (B) Place the Top Assembly (A) upside down on a soft surface. Align the exposed threads of Post (B)
with the pre-threaded hole in the Top Assembly (A). Tighten by turning in a clockwise direction. See illustration.
2.Attach Base Assembly (C) Insert the dowels of Post (B) into the pre-drilled holes in the Base Assembly (C) so that
the pre-threaded hole in the Post (B) is aligned with the pre-drilled hole in the Base Assembly (C). Secure with Allen
Head Bolt (D), Lock Washer (E) and Flat Washer (F) using Allen Head Wrench (G). See illustration.
D
E
F
G
B
C
A