BOMBAY The Jaipur Elephant Table User manual

The Jaipur Elephant Table
WARNING
• This table is intended for decorative use only.
• This table is NOT designed to hold excessive weight or to be used as a seating surface.
• Improper use may result in damage to the table and/or bodily harm.
• Do not use a candle taller than 3 inches in the lantern.
• Trim wick to 1/4 inch prior to lighting.
• Do not allow wick trimmings to accumulate in wax pool.
• Burn candle within sight. Never leave a burning candle unattended or with children.
• Keep away from ammable objects.
CARE AND MAINTENANCE
• Do not use harsh chemicals when cleaning the surface of the unit. Doing so will damage the
nish. It is best to wipe clean with a damp cloth.
• If you are located in a freeze/frost climate (32°F and below), store indoors for the
winter months.
For questions or comments about your product, please contact us at
[email protected] or call our toll free customer service number
1-800-876-7336.
We guarantee that every product we sell will stand up
to the supreme test — our customers’ satisfaction.
BO_4100_A3_EN_11.01.14

A B C D E
Elephant Base Tabletop Lantern Stake Lantern
11111
F G H I J
Stake Anchor Stake Cap Flat Washer Large Allen Bolt Small Allen Bolt
11242
LARGE PIECES
SMALL PIECES
K
Allen Wrench
1
TOOLS
*Candle not
included.
ASSEMBLY INSTRUCTIONS
1. Secure the base (B) to the Elephant
(A) with two small Allen bolts (J) and
the two at washers (H) using the
Allen wrench (K).
2. Position the tabletop (C) on top of the
Elephant (A). Slide the stake anchor
(F) through the tabletop (C) and into
the Elephant (A).
3. Secure the stake anchor (F) to the
tabletop (C) and the Elephant (A)
with four large Allen bolts (I) using the
Allen wrench (K).
A
H
J
B
H
J
K
4. Slide the stake cap (G) onto the bottom
of the lantern stake (D).
5. Insert the latern stake (D) into the stake
anchor (F) through the tabletop (C) and
Elephant (A).
6. Hang the lantern (E) from the lantern
stake (D) as desired.
D
G
C
F
A
A
A
C
F
I
I
I
I
K
ASSEMBLY NOTES
• Please make sure that you have all the parts indicated before you begin assembly.
• Items should be assembled on a soft surface to avoid scratching during assembly.
• This product may need periodic tightening. We recommend tightening every 6 months.
• Caution: Do not overtighten.
ATTENTION
Read all instructions before assembly and use of this product. Failure
to follow these instructions and warnings could result in injury
or damage to the item. Keep these instructions for future reference.
-